CE-MD机械指令（2006/42/EC）最新协调标准清单——2024年9月17日发布，附excel版本下载

CE-MD机械指令（2006/42/EC）最新协调标准清单——2024年9月17日发布，附excel版本下载

时间：2025-3-1 编辑：管理员
2006_42 Machinery – Summary list of harmonised standards – Generated on 17.9.2024下载

EUROPEAN COMMISSION

Directorate-General for Internal Market, Industry, Entrepreneurship and SMEs

Ecosystems III: Construction, Machinery and Standardisation

Standards policy

Brussels, 17.9.2024

Summary of references of harmonised standards published in the Official Journal – Directive 2006/42/EC 1  of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC

The summary below consolidates the references of harmonised standards published by the Commission in the Official Journal of the European Union (OJ). It reproduces information already published in the L or C series of the OJ as indicated in columns (2), (5) and/or (7). It contains all references which, when the summary was generated, still provided a presumption of conformity together with references already withdrawn from the OJ.

The Commission services provide this summary for information purposes only. Although they take every possible precaution to ensure that the summary is updated regularly and is correct, errors may occur and the summary may not be complete at a certain point in time. The summary does not as such generate legal effects.

This summary was generated on 17 September 2024

    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN ISO 12100:2010   Safety of machinery – General principles for design – Risk assessment and risk reduction (ISO 12100:2010)   A   08/04/2011   OJ C 110 – 08/04/2011     –       –       –

1 OJ L 157, 9.6.2006, p. 24–86

Commission européenne/Europese Commissie, 1049 Bruxelles/Brussel, BELGIQUE/BELGIË

Contact : grow-has-administrator@ec.europa.eu

    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN ISO 12100-1:2003, EN ISO 12100- 1:2003/A1:2009 Safety of machinery – Basic concepts,  general principles for design – Part 1:   Basic terminology, methodology (ISO 12100-1:2003)   A   29/12/2009   OJ C 309 – 18/12/2009     –       –   30/11/201 3   OJ C 110 – 08/04/2011
  2006/42/EC   CEN   EN ISO 12100-2:2003, EN ISO 12100- 2:2003/A1:2009 Safety of machinery – Basic concepts, general principles for design – Part 2:  Technical principles (ISO 12100- 2:2003)   A   29/12/2009   OJ C 309 – 18/12/2009     –       –   30/11/201 3   OJ C 110 – 08/04/2011
  2006/42/EC   CEN   EN ISO 14121-1:2007   Safety of machinery – Risk assessment – Part 1: Principles (ISO 14121-1:2007)   A   29/12/2009   OJ C 214 – 08/09/2009     –       –   30/11/201 3   OJ C 110 – 08/04/2011
  2006/42/EC   CEN   EN 349:1993+A1:2008   Safety of machinery – Minimum gaps to avoid crushing of parts of the human body   B   29/12/2009   OJ C 214 – 08/09/2009     –       –   03/09/202 2   OJ L 72 –   03/03/2021
  2006/42/EC   CEN   EN 547-1:1996+A1:2008 Safety of machinery – Human body measurements – Part 1: Principles for determining the dimensions required for openings for whole body access into machinery   B   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 547-2:1996+A1:2008 Safety of machinery – Human body measurements – Part 2: Principles for determining the dimensions required for access openings   B   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 547-3:1996+A1:2008   Safety of machinery – Human body measurements – Part 3: Anthropometric data   B   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 574:1996+A1:2008   Safety of machinery – Two-hand control devices – Functional aspects – Principles for design   B   29/12/2009   OJ C 214 – 08/09/2009     –       –   03/09/202 2   OJ L 72 –   03/03/2021
  2006/42/EC   CEN   EN 614-1:2006+A1:2009   Safety of machinery – Ergonomic design principles – Part 1: Terminology and general principles   B   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 614-2:2000+A1:2008   Safety of machinery – Ergonomic design principles – Part 2: Interactions between  the design of machinery and work tasks   B   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 626-1:1994+A1:2008 Safety of machinery – Reduction of risks to health from hazardous substances emitted by machinery – Part 1: Principles and specifications for machinery manufacturers   B   29/12/2009   OJ C 214 – 08/09/2009     –       –   31/05/201 6   OJ C 173 – 13/05/2016
  2006/42/EC   CEN   EN 626-2:1996+A1:2008 Safety of machinery – Reduction of risk to health from hazardous substances emitted by machinery – Part 2: Methodology leading to verification procedures   B   29/12/2009   OJ C 214 – 08/09/2009     –       –   30/06/201 6   OJ C 173 – 13/05/2016
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 842:1996+A1:2008   Safety of machinery – Visual danger signals – General requirements, design and testing   B   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 894-1:1997+A1:2008 Safety of machinery – Ergonomics requirements for the design of displays and control actuators – Part 1: General  principles for human interactions with  displays and control actuators   B   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 894-2:1997+A1:2008   Safety of machinery – Ergonomics requirements for the design of displays and control actuators – Part 2: Displays   B   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 894-3:2000+A1:2008 Safety of machinery – Ergonomics requirements for the design of displays and control actuators – Part 3: Control actuators   B   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 894-4:2010 Safety of machinery – Ergonomics requirements for the design of displays   and control actuators – Part 4: Location   and arrangement of displays and control actuators   B   20/10/2010   OJ C 284 – 20/10/2010     –       –       –
  2006/42/EC   CEN   EN 953:1997+A1:2009 Safety of machinery – Guards – General requirements for the design and construction of fixed and movable guards   B   29/12/2009   OJ C 214 – 08/09/2009     –       –   31/05/201 6   OJ C 173 – 13/05/2016
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 981:1996+A1:2008   Safety of machinery – System of auditory and visual danger and    information signals   B   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 982:1996+A1:2008   Safety of machinery – Safety requirements for fluid power systems and their components – Hydraulics   B   29/12/2009   OJ C 214 – 08/09/2009     –       –   30/11/201 1   OJ C 110 – 08/04/2011
  2006/42/EC   CEN   EN 983:1996+A1:2008   Safety of machinery – Safety requirements for fluid power systems and their components – Pneumatics   B   29/12/2009   OJ C 214 – 08/09/2009     –       –   30/11/201 1   OJ C 110 – 08/04/2011
  2006/42/EC   CEN   EN 999:1998+A1:2008 Safety of machinery – The positioning of protective equipment in respect of approach speeds of parts of the human body   B   29/12/2009   OJ C 214 – 08/09/2009     –       –   30/11/201 0   OJ C 284 – 20/10/2010
  2006/42/EC   CEN   EN 1005-1:2001+A1:2008   Safety of machinery – Human physical performance – Part 1: Terms and definitions   B   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 1005-2:2003+A1:2008 Safety of machinery – Human physical performance – Part 2: Manual handling of machinery and component parts of   machinery   B   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 1005-3:2002+A1:2008   Safety of machinery – Human physical performance – Part 3: Recommended    force limits for machinery operation   B   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 1005-4:2005+A1:2008 Safety of machinery – Human physical performance – Part 4: Evaluation of working postures and movements in relation to machinery   B   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 1032:2003+A1:2008   Mechanical vibration – Testing of mobile machinery in order to determine the vibration emission value   B   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 1037:1995+A1:2008   Safety of machinery – Prevention of unexpected start-up   B   29/12/2009   OJ C 214 – 08/09/2009     –       –   19/09/202 0   OJ L 286 –  07/11/2019
  2006/42/EC   CEN   EN 1088:1995+A2:2008   Safety of machinery – Interlocking devices associated with guards – Principles for design and selection   B   29/12/2009   OJ C 214 – 08/09/2009     –       –   30/04/201 5   OJ C 110 – 11/04/2014
  2006/42/EC   CEN   EN 1093-1:2008 Safety of machinery – Evaluation of the emission of airborne hazardous substances – Part 1: Selection of test methods   B   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 1093-2:2006+A1:2008 Safety of machinery – Evaluation of the emission of airborne hazardous substances – Part 2: Tracer gas method for the measurement of the emission rate of a given pollutant   B   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 1093-3:2006+A1:2008 Safety of machinery – Evaluation of the emission of airborne hazardous substances – Part 3: Test bench method for the measurement of the emission rate of a given pollutant   B   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 1093-4:1996+A1:2008 Safety of machinery – Evaluation of the emission of airborne hazardous substances – Part 4: Capture efficiency of an exhaust system – Tracer method   B   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 1093-6:1998+A1:2008 Safety of machinery – Evaluation of the emission of airborne hazardous substances – Part 6: Separation efficiency by mass, unducted outlet   B   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 1093-7:1998+A1:2008 Safety of machinery – Evaluation of the emission of airborne hazardous substances – Part 7: Separation efficiency by mass, ducted outlet   B   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 1093-8:1998+A1:2008 Safety of machinery – Evaluation of the emission of airborne hazardous substances – Part 8: Pollutant concentration parameter, test bench method   B   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 1093-9:1998+A1:2008 Safety of machinery – Evaluation of the emission of airborne hazardous substances – Part 9: Pollutant concentration parameter, room method   B   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 1093-11:2001+A1:2008 Safety of machinery – Evaluation of the emission of airborne hazardous substances – Part 11: Decontamination index   B   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 1127-1:2007   Explosive atmospheres – Explosion prevention and protection – Part 1: Basic concepts and methodology   B   29/12/2009   OJ C 309 – 18/12/2009     –       –   31/07/201 4   OJ C 338 – 18/11/2011
  2006/42/EC   CEN   EN 1127-1:2011   Explosive atmospheres – Explosion prevention and protection – Part 1: Basic concepts and methodology   B   18/11/2011   OJ C 338 – 18/11/2011     –       –   02/10/202 1   OJ L 102 –  02/04/2020
  2006/42/EC   CEN   EN 1127-1:2019   Explosive atmospheres – Explosion prevention and protection – Part 1: Basic concepts and methodology   B   02/04/2020   OJ L 102 –  02/04/2020     –       –       –
  2006/42/EC   CEN   EN 1127-2:2002+A1:2008   Explosive atmospheres – Explosion prevention and protection – Part 2: Basic concepts and methodology for mining   B   29/12/2009   OJ C 214 – 08/09/2009     –       –   13/02/201 5   OJ C 54 –  13/02/2015
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 1127-2:2014   Explosive atmospheres – Explosion prevention and protection – Part 2: Basic concepts and methodology for mining   B   13/02/2015   OJ C 54 –  13/02/2015     –       –       –
  2006/42/EC   CEN   EN 1299:1997+A1:2008 Mechanical vibration and shock – Vibration isolation of machines – Information for the application of source isolation   B   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 1760-1:1997+A1:2009 Safety of machinery – Pressure sensitive protective devices – Part 1: General principles for the design and testing of pressure sensitive mats and pressure sensitive floors   B   29/12/2009   OJ C 214 – 08/09/2009     –       –   28/11/201 3   OJ C 348 – 28/11/2013
  2006/42/EC   CEN   EN 1760-2:2001+A1:2009 Safety of machinery – Pressure sensitive protective devices – Part 2: General principles for the design and testing of pressure sensitive edges and pressure   sensitive bars   B   29/12/2009   OJ C 214 – 08/09/2009     –       –   28/11/201 3   OJ C 348 – 28/11/2013
  2006/42/EC   CEN   EN 1760-3:2004+A1:2009 Safety of machinery – Pressure sensitive protective devices – Part 3: General principles for the design and testing of    pressure sensitive bumpers, plates, wires and similar devices   B   29/12/2009   OJ C 214 – 08/09/2009     –       –   31/01/201 4   OJ C 348 – 28/11/2013
  2006/42/EC   CEN   EN 1837:2020   Safety of machinery – Integral lighting of machines   B   15/10/2021   OJ L 366 –  15/10/2021     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 1837:1999+A1:2009   Safety of machinery – Integral lighting of machines   B   29/12/2009   OJ C 309 – 18/12/2009     –       –   15/04/202 3   OJ L 366 –  15/10/2021
  2006/42/EC   CEN   EN ISO 3741:2009 Acoustics – Determination of sound power levels of noise sources using sound pressure – Precision methods for reverberation rooms (ISO 3741:1999,   including Cor 1:2001)   B   29/12/2009   OJ C 309 – 18/12/2009     –       –   30/04/201 1   OJ C 110 – 08/04/2011
  2006/42/EC   CEN   EN ISO 3741:2010 Acoustics – Determination of sound power levels and sound energy levels of noise sources using sound pressure – Precision methods for reverberation test rooms (ISO 3741:2010)   B   08/04/2011   OJ C 110 – 08/04/2011     –       –       –
  2006/42/EC   CEN   EN ISO 3743-1:2009 Acoustics – Determination of sound power levels of noise sources – Engineering methods for small, movable sources in reverberant fields – Part 1: Comparison method for hard-walled test rooms (ISO 3743-1:1994)   B   29/12/2009   OJ C 309 – 18/12/2009     –       –   30/04/201 1   OJ C 110 – 08/04/2011
    2006/42/EC     CEN     EN ISO 3743-1:2010 Acoustics – Determination of sound power levels and sound energy levels of noise sources using sound pressure – Engineering methods for small movable sources in reverberant fields – Part 1: Comparison method for a hard-walled test room (ISO 3743-1:2010)   B     08/04/2011   OJ C 110 – 08/04/2011     –       –       –
    2006/42/EC     CEN     EN ISO 3743-2:2009 Acoustics – Determination of sound power levels of noise sources using sound pressure – Engineering methods for small, movable sources in reverberant fields – Part 2: Methods for special reverberation test rooms (ISO    3743-2:1994)   B     29/12/2009   OJ C 309 – 18/12/2009     –       –   15/04/202 3   OJ L 366 –  15/10/2021
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
    2006/42/EC     CEN     EN ISO 3743-2:2019 Acoustics – Determination of sound power levels of noise sources using sound pressure – Engineering methods for small, movable sources in reverberant fields – Part 2: Methods for special reverberation test rooms (ISO    3743-2:2018)   B     03/03/2021   OJ L 72 –   03/03/2021     –       –       –
  2006/42/EC   CEN   EN ISO 3744:2009 Acoustics – Determination of sound power levels of noise sources using sound pressure – Engineering method in  an essentially free field over a reflecting plane (ISO 3744:1994)   B   29/12/2009   OJ C 309 – 18/12/2009     –       –   30/04/201 1   OJ C 110 – 08/04/2011
  2006/42/EC   CEN   EN ISO 3744:2010 Acoustics – Determination of sound power levels and sound energy levels of noise sources using sound pressure – Engineering methods for an essentially free field over a reflecting plane (ISO   3744:2010)   B   08/04/2011   OJ C 110 – 08/04/2011     –       –       –
  2006/42/EC   CEN   EN ISO 3745:2009 Acoustics – Determination of sound power levels of noise sources using sound pressure – Precision methods for    anechoic and semi-anechoic rooms (ISO 3745:2003)   B   29/12/2009   OJ C 309 – 18/12/2009     –       –   30/09/201 2   OJ C 159 – 05/06/2012
  2006/42/EC   CEN   EN ISO 3745:2012 Acoustics – Determination of sound power levels and sound energy levels of noise sources using sound pressure – Precision methods for anechoic rooms and hemi-anechoic rooms (ISO 3745:2012)   B   05/06/2012   OJ C 159 – 05/06/2012     –       –   30/06/201 8   OJ C 92 –  09/03/2018
  2006/42/EC   CEN   EN ISO 3745:2012, EN ISO 3745:2012/A1:2017 Acoustics – Determination of sound power levels and sound energy levels of noise sources using sound pressure – Precision methods for anechoic rooms and hemi-anechoic rooms (ISO 3745:2012)   B   09/03/2018   OJ C 92 –  09/03/2018     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN ISO 3746:2009 Acoustics – Determination of sound power levels of noise sources using sound pressure – Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:1995, including Cor 1:1995)   B   29/12/2009   OJ C 309 – 18/12/2009     –       –   30/06/201 1   OJ C 110 – 08/04/2011
  2006/42/EC   CEN   EN ISO 3746:2010 Acoustics – Determination of sound power levels and sound energy levels of noise sources using sound pressure – Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:2010)   B   08/04/2011   OJ C 110 – 08/04/2011     –       –       –
  2006/42/EC   CEN   EN ISO 3747:2009 Acoustics – Determination of sound power levels of noise sources using sound pressure – Comparison method in situ (ISO 3747:2000)   B   29/12/2009   OJ C 309 – 18/12/2009     –       –   30/06/201 1   OJ C 110 – 08/04/2011
  2006/42/EC   CEN   EN ISO 3747:2010 Acoustics – Determination of sound power levels and sound energy levels of noise sources using sound pressure – Engineering/survey methods for use in situ in a reverberant environment (ISO 3747:2010)   B   08/04/2011   OJ C 110 – 08/04/2011     –       –       –
  2006/42/EC   CEN   EN ISO 4413:2010   Hydraulic fluid power – General rules and safety requirements for systems and their components (ISO 4413:2010)   B   08/04/2011   OJ C 110 – 08/04/2011     –       –       –
  2006/42/EC   CEN   EN ISO 4414:2010   Pneumatic fluid power – General rules    and safety requirements for systems and their components (ISO 4414:2010)   B   08/04/2011   OJ C 110 – 08/04/2011     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN ISO 4871:2009   Acoustics – Declaration and verification of noise emission values of machinery    and equipment (ISO 4871:1996)   B   29/12/2009   OJ C 309 – 18/12/2009     –       –       –
  2006/42/EC   CEN   EN ISO 5136:2009 Acoustics – Determination of sound power radiated into a duct by fans and other air-moving devices – In-duct method (ISO 5136:2003)   B   29/12/2009   OJ C 309 – 18/12/2009     –       –       –
  2006/42/EC   CEN   EN ISO 7235:2009 Acoustics – Laboratory measurement procedures for ducted silencers and air- terminal units – Insertion loss, flow noise and total pressure loss (ISO 7235:2003)   B   29/12/2009   OJ C 309 – 18/12/2009     –       –       –
  2006/42/EC   CEN   EN ISO 7731:2008   Ergonomics – Danger signals for public and work areas – Auditory danger signals (ISO 7731:2003)   B   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN ISO 9614-1:2009 Acoustics – Determination of sound power levels of noise sources using sound intensity – Part 1: Measurement at discrete points (ISO 9614-1:1993)   B   29/12/2009   OJ C 309 – 18/12/2009     –       –       –
  2006/42/EC   CEN   EN ISO 9614-3:2009 Acoustics – Determination of sound power levels of noise sources using sound intensity – Part 3: Precision method for measurement by scanning (ISO 9614-3:2002)   B   29/12/2009   OJ C 309 – 18/12/2009     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN ISO 10326-1:2016 Mechanical vibration – Laboratory method for evaluating vehicle seat vibration – Part 1: Basic requirements   (ISO 10326-1:2016, Corrected version 2017-02)   B   09/06/2017   OJ C 183 – 09/06/2017     –       –       –
  2006/42/EC   CEN   EN ISO 11145:2008   Optics and photonics – Lasers and laser- related equipment – Vocabulary and symbols (ISO 11145:2006)   B   29/12/2009   OJ C 214 – 08/09/2009     –       –   30/09/201 6   OJ C 332 – 09/09/2016
  2006/42/EC   CEN   EN ISO 11161:2007, EN ISO 11161:2007/A1:2010   Safety of machinery – Integrated manufacturing systems – Basic    requirements (ISO 11161:2007)   B   26/05/2010   OJ C 136 – 26/05/2010     –       –       –
    2006/42/EC     CEN     EN ISO 11200:2009 Acoustics – Noise emitted by machinery and equipment – Guidelines for the use   of basic standards for the determination  of emission sound pressure levels at a work station and at other specified positions (ISO 11200:1995, including Cor 1:1997)   B     29/12/2009   OJ C 309 – 18/12/2009     –       –   13/02/201 5   OJ C 54 –  13/02/2015
  2006/42/EC   CEN   EN ISO 11200:2014 Acoustics – Noise emitted by machinery and equipment – Guidelines for the use   of basic standards for the determination  of emission sound pressure levels at a work station and at other specified positions (ISO 11200:2014)   B   13/02/2015   OJ C 54 –  13/02/2015     –       –   19/09/202 0   OJ L 286 –  07/11/2019
    2006/42/EC     CEN     EN ISO 11201:2009 Acoustics – Noise emitted by machinery and equipment – Measurement of emission sound pressure levels at a work station and at other specified positions –   Engineering method in an essentially free field over a reflecting plane (ISO 11201:1995, including Cor 1:1997)   B     29/12/2009   OJ C 309 – 18/12/2009     –       –   30/11/201 0   OJ C 284 – 20/10/2010
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
    2006/42/EC     CEN     EN ISO 11201:2010 Acoustics – Noise emitted by machinery and equipment – Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible  environmental corrections (ISO 11201:2010)     B     20/10/2010     OJ C 284 – 20/10/2010     –       –       –
  2006/42/EC   CEN   EN ISO 11202:2009 Acoustics – Noise emitted by machinery and equipment – Measurement of emission sound pressure levels at a work station and at other specified positions –   Survey method in situ (ISO 11202:1995)   B   29/12/2009   OJ C 309 – 18/12/2009     –       –   30/11/201 0   OJ C 284 – 20/10/2010
  2006/42/EC   CEN   EN ISO 11202:2010 Acoustics – Noise emitted by machinery and equipment – Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010)   B   20/10/2010   OJ C 284 – 20/10/2010     –       –   11/10/202 3   OJ L 115 –  13/04/2022
  2006/42/EC   CEN   EN ISO 11202:2010, EN ISO 11202:2010/A1:2021 Acoustics – Noise emitted by machinery and equipment – Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010)   B   13/04/2022   OJ L 115 –  13/04/2022     –       –       –
  2006/42/EC   CEN   EN ISO 11203:2009 Acoustics – Noise emitted by machinery and equipment – Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995)   B   29/12/2009   OJ C 309 – 18/12/2009     –       –   03/09/202 2   OJ L 72 –   03/03/2021
  2006/42/EC   CEN   EN ISO 11203:2009, EN ISO 11203:2009/A1:2020 Acoustics – Noise emitted by machinery and equipment – Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995)   B   03/03/2021   OJ L 72 –   03/03/2021     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
    2006/42/EC     CEN     EN ISO 11204:2009 Acoustics – Noise emitted by machinery and equipment – Measurement of emission sound pressure levels at a work station and at other specified positions –   Method requiring environmental corrections (ISO 11204:1995, including Cor 1:1997)   B     29/12/2009   OJ C 309 – 18/12/2009     –       –   30/11/201 0   OJ C 284 – 20/10/2010
  2006/42/EC   CEN   EN ISO 11204:2010 Acoustics – Noise emitted by machinery and equipment – Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections (ISO 11204:2010)   B   20/10/2010   OJ C 284 – 20/10/2010     –       –       –
  2006/42/EC   CEN   EN ISO 11205:2009 Acoustics – Noise emitted by machinery  and equipment – Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity (ISO 11205:2003)   B   29/12/2009   OJ C 309 – 18/12/2009     –       –       –
  2006/42/EC   CEN   EN ISO 11252:2008   Lasers and laser-related equipment – Laser device – Minimum requirements for documentation (ISO 11252:2004)   B   29/12/2009   OJ C 214 – 08/09/2009     –       –   28/02/201 4   OJ C 348 – 28/11/2013
  2006/42/EC   CEN   EN ISO 11546-1:2009 Acoustics – Determination of sound insulation performances of enclosures – Part 1: Measurements under laboratory  conditions (for declaration purposes) (ISO 11546-1:1995)   B   29/12/2009   OJ C 309 – 18/12/2009     –       –       –
  2006/42/EC   CEN   EN ISO 11546-2:2009 Acoustics – Determination of sound insulation performances of enclosures – Part 2: Measurements in situ (for acceptance and verification purposes) (ISO 11546-2:1995)   B   29/12/2009   OJ C 309 – 18/12/2009     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN ISO 11553-1:2008   Safety of machinery – Laser processing machines – Part 1: General safety requirements (ISO 11553-1:2005)   B   29/12/2009   OJ C 214 – 08/09/2009     –       –   15/04/202 3   OJ L 366 –  15/10/2021
  2006/42/EC   CEN   EN ISO 11553-1:2020, EN ISO 11553- 1:2020/A11:2020   Safety of machinery – Laser processing machines – Part 1: Laser safety requirements (ISO 11553-1:2020)   B   15/10/2021   OJ L 366 –  15/10/2021     –       –       –
    2006/42/EC     CEN     EN ISO 11553-3:2013 Safety of machinery – Laser processing machines – Part 3: Noise reduction and  noise measurement methods for laser processing machines and hand-held processing devices and associated auxiliary equipment (accuracy grade 2) (ISO 11553-3:2013)   B     28/11/2013   OJ C 348 – 28/11/2013     –       –       –
  2006/42/EC   CEN   EN ISO 11554:2008 Optics and photonics – Lasers and laser- related equipment – Test methods for laser beam power, energy and temporal characteristics (ISO 11554:2006)   B   29/12/2009   OJ C 214 – 08/09/2009     –       –   30/06/201 8   OJ C 92 –  09/03/2018
  2006/42/EC   CEN   EN ISO 11554:2017 Optics and photonics – Lasers and laser- related equipment – Test methods for laser beam power, energy and temporal characteristics (ISO 11554:2017)   B   09/03/2018   OJ C 92 –  09/03/2018     –       –       –
  2006/42/EC   CEN   EN ISO 11688-1:2009 Acoustics – Recommended practice for the design of low-noise machinery and equipment – Part 1: Planning (ISO/TR  11688-1:1995)   B   29/12/2009   OJ C 309 – 18/12/2009     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN ISO 11691:2009 Acoustics – Measurement of insertion loss of ducted silencers without flow – Laboratory survey method (ISO 11691:1995)   B   29/12/2009   OJ C 309 – 18/12/2009     –       –       –
  2006/42/EC   CEN   EN ISO 11957:2009 Acoustics – Determination of sound insulation performance of cabins – Laboratory and in situ measurements (ISO 11957:1996)   B   29/12/2009   OJ C 309 – 18/12/2009     –       –       –
  2006/42/EC   CEN   EN 12198-1:2000+A1:2008 Safety of machinery – Assessment and   reduction of risks arising from radiation emitted by machinery – Part 1: General   principles   B   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 12198-2:2002+A1:2008 Safety of machinery – Assessment and reduction of risks arising from radiation  emitted by machinery – Part 2: Radiation emission measurement procedure   B   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 12198-3:2002+A1:2008 Safety of machinery – Assessment and   reduction of risks arising from radiation emitted by machinery – Part 3: Reduction of radiation by attenuation or screening   B   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 12254:2010, EN 12254:2010/AC:2011   Screens for laser working places – Safety requirements and testing   B   26/05/2010   OJ C 136 – 26/05/2010     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 12786:2013   Safety of machinery – Requirements for the drafting of the vibration clauses of   safety standards   B   28/11/2013   OJ C 348 – 28/11/2013     –       –       –
  2006/42/EC   CEN   EN 13478:2001+A1:2008   Safety of machinery – Fire prevention and protection   B   29/12/2009   OJ C 214 – 08/09/2009     –       –   09/09/201 6   OJ C 332 – 09/09/2016
  2006/42/EC   CEN   EN 13490:2001+A1:2008   Mechanical vibration – Industrial trucks – Laboratory evaluation and specification of operator seat vibration   B   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN ISO 13732-1:2008 Ergonomics of the thermal environment – Methods for the assessment of human  responses to contact with surfaces – Part 1: Hot surfaces (ISO 13732-1:2006)   B   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN ISO 13732-3:2008 Ergonomics of the thermal environment – Methods for the assessment of human  responses to contact with surfaces – Part 3: Cold surfaces (ISO 13732-3:2005)   B   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN ISO 13753:2008 Mechanical vibration and shock – Hand- arm vibration – Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm  system (ISO 13753:1998)   B   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN ISO 13849-1:2008, EN ISO 13849- 1:2008/AC:2009 Safety of machinery – Safety-related parts of control systems – Part 1: General principles for design (ISO 13849-1:2006)   B   29/12/2009   OJ C 214 – 08/09/2009     –       –   30/06/201 6   OJ C 173 – 13/05/2016
  2006/42/EC   CEN   EN ISO 13849-1:2015 Safety of machinery – Safety-related parts of control systems – Part 1: General principles for design (ISO 13849-1:2015)   B   13/05/2016   OJ C 173 – 13/05/2016     –       –   15/05/202 7   OJ L, 2024/1329 – 15/05/2024
  2006/42/EC   CEN   EN ISO 13849-1:2023 Safety of machinery – Safety-related parts of control systems – Part 1: General principles for design (ISO 13849-1:2023)   B   15/05/2024   OJ L, 2024/1329 – 15/05/2024     –       –       –
  2006/42/EC   CEN   EN ISO 13849-2:2008   Safety of machinery – Safety-related parts of control systems – Part 2: Validation (ISO 13849-2:2003)   B   29/12/2009   OJ C 214 – 08/09/2009     –       –   30/04/201 3   OJ C 99 –  05/04/2013
  2006/42/EC   CEN   EN ISO 13849-2:2012   Safety of machinery – Safety-related parts of control systems – Part 2: Validation (ISO 13849-2:2012)   B   05/04/2013   OJ C 99 –  05/04/2013     –       –       –
  2006/42/EC   CEN   EN ISO 13850:2008   Safety of machinery – Emergency stop – Principles for design (ISO 13850:2006)   B   29/12/2009   OJ C 214 – 08/09/2009     –       –   31/05/201 6   OJ C 173 – 13/05/2016
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN ISO 13850:2015   Safety of machinery – Emergency stop function – Principles for design (ISO    13850:2015)   B   13/05/2016   OJ C 173 – 13/05/2016     –       –       –
  2006/42/EC   CEN   EN ISO 13851:2019   Safety of machinery – Two-hand control devices – Principles for design and selection (ISO 13851:2019)   B   03/03/2021   OJ L 72 –   03/03/2021     –       –       –
  2006/42/EC   CEN   EN ISO 13854:2019   Safety of machinery – Minimum gaps to avoid crushing of parts of the human body (ISO 13854:2017)   B   03/03/2021   OJ L 72 –   03/03/2021     –       –       –
  2006/42/EC   CEN   EN ISO 13855:2010 Safety of machinery – Positioning of safeguards with respect to the approach  speeds of parts of the human body (ISO 13855:2010)   B   20/10/2010   OJ C 284 – 20/10/2010     –       –       –
  2006/42/EC   CEN   EN ISO 13856-1:2013 Safety of machinery – Pressure-sensitive protective devices – Part 1: General principles for design and testing of pressure-sensitive mats and pressure- sensitive floors (ISO 13856-1:2013)   B   28/11/2013   OJ C 348 – 28/11/2013     –       –       –
  2006/42/EC   CEN   EN ISO 13856-2:2013 Safety of machinery – Pressure-sensitive protective devices – Part 2: General principles for design and testing of pressure-sensitive edges and pressure- sensitive bars (ISO 13856-2:2013)   B   28/11/2013   OJ C 348 – 28/11/2013     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN ISO 13856-3:2013 Safety of machinery – Pressure-sensitive protective devices – Part 3: General principles for design and testing of pressure-sensitive bumpers, plates, wires and similar devices (ISO 13856-3:2013)   B   28/11/2013   OJ C 348 – 28/11/2013     –       –       –
  2006/42/EC   CEN   EN ISO 13857:2008 Safety of machinery – Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008)   B   29/12/2009   OJ C 214 – 08/09/2009     –       –   03/09/202 2   OJ L 72 –   03/03/2021
  2006/42/EC   CEN   EN ISO 13857:2019 Safety of machinery – Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2019)   B   03/03/2021   OJ L 72 –   03/03/2021     –       –       –
  2006/42/EC   CEN   EN ISO 14118:2018   Safety of machinery – Prevention of unexpected start-up (ISO 14118:2017)   B   19/03/2019   OJ L 75 –   19/03/2019     –       –       –
  2006/42/EC   CEN   EN ISO 14119:2013 Safety of machinery – Interlocking devices associated with guards – Principles for design and selection (ISO 14119:2013)   B   11/04/2014   OJ C 110 – 11/04/2014     –       –       –
  2006/42/EC   CEN   EN ISO 14120:2015 Safety of machinery – Guards – General requirements for the design and construction of fixed and movable guards (ISO 14120:2015)   B   13/05/2016   OJ C 173 – 13/05/2016     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN ISO 14122-1:2001, EN ISO 14122- 1:2001/A1:2010 Safety of machinery – Permanent means of access to machinery – Part 1: Choice  of fixed means of access between two levels (ISO 14122-1:2001)   B   20/10/2010   OJ C 284 – 20/10/2010     –       –   31/12/201 6   OJ C 332 – 09/09/2016
  2006/42/EC   CEN   EN ISO 14122-1:2016 Safety of machinery – Permanent means  of access to machinery – Part 1: Choice   of fixed means and general requirements of access (ISO 14122-1:2016)   B   09/09/2016   OJ C 332 – 09/09/2016     –       –       –
  2006/42/EC   CEN   EN ISO 14122-2:2001, EN ISO 14122- 2:2001/A1:2010 Safety of machinery – Permanent means of access to machinery – Part 2: Working platforms and walkways (ISO 14122-2:2001)   B   20/10/2010   OJ C 284 – 20/10/2010     –       –   31/12/201 6   OJ C 332 – 09/09/2016
  2006/42/EC   CEN   EN ISO 14122-2:2016 Safety of machinery – Permanent means of access to machinery – Part 2: Working platforms and walkways (ISO 14122-2:2016)   B   09/09/2016   OJ C 332 – 09/09/2016     –       –       –
  2006/42/EC   CEN   EN ISO 14122-3:2001, EN ISO 14122- 3:2001/A1:2010 Safety of machinery – Permanent means of access to machinery – Part 3: Stairs,    stepladders and guard-rails (ISO 14122- 3:2001)   B   20/10/2010   OJ C 284 – 20/10/2010     –       –   31/12/201 6   OJ C 332 – 09/09/2016
  2006/42/EC   CEN   EN ISO 14122-3:2016 Safety of machinery – Permanent means of access to machinery – Part 3: Stairs,    stepladders and guard-rails (ISO 14122- 3:2016)   B   09/09/2016   OJ C 332 – 09/09/2016     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN ISO 14122-4:2004, EN ISO 14122- 4:2004/A1:2010   Safety of machinery – Permanent means of access to machinery – Part 4: Fixed ladders (ISO 14122-4:2004)   B   08/04/2011   OJ C 110 – 08/04/2011     –       –   31/12/201 6   OJ C 332 – 09/09/2016
  2006/42/EC   CEN   EN ISO 14122-4:2016   Safety of machinery – Permanent means of access to machinery – Part 4: Fixed ladders (ISO 14122-4:2016)   B   09/09/2016   OJ C 332 – 09/09/2016     –       –       –
  2006/42/EC   CEN   EN ISO 14123-1:2015 Safety of machinery – Reduction of risks to health resulting from hazardous substances emitted by machinery – Part 1: Principles and specifications for machinery manufacturers (ISO 14123- 1:2015)   B   13/05/2016   OJ C 173 – 13/05/2016     –       –       –
  2006/42/EC   CEN   EN ISO 14123-2:2015 Safety of machinery – Reduction of risks to health resulting from hazardous substances emitted by machinery – Part 2: Methodology leading to verification  procedures (ISO 14123-2:2015)   B   13/05/2016   OJ C 173 – 13/05/2016     –       –       –
  2006/42/EC   CEN   EN ISO 14159:2008   Safety of machinery – Hygiene requirements for the design of  machinery (ISO 14159:2002)   B   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN ISO 14738:2008 Safety of machinery – Anthropometric requirements for the design of workstations at machinery (ISO 14738:2002, including Cor 1:2003 and Cor 2:2005)   B   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN ISO 15536-1:2008   Ergonomics – Computer manikins and body templates – Part 1: General requirements (ISO 15536-1:2005)   B   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 15967:2011   Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours   B   18/11/2011   OJ C 338 – 18/11/2011     –       –   02/02/202 5   OJ L 194 –  02/08/2023
  2006/42/EC   CEN   EN 15967:2022   Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours   B   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
  2006/42/EC   CEN   EN 16590-1:2014 Tractors and machinery for agriculture and forestry – Safety-related parts of control systems – Part 1: General principles for design and development (ISO 25119-1:2010 modified)   B   13/02/2015   OJ C 54 –  13/02/2015     –       –   15/11/202 5   OJ L, 2024/1329 – 15/05/2024
  2006/42/EC   CEN   EN 16590-2:2014 Tractors and machinery for agriculture and forestry – Safety-related parts of control systems – Part 2: Concept phase (ISO 25119-2:2010 modified)   B   13/02/2015   OJ C 54 –  13/02/2015     –       –   15/11/202 5   OJ L, 2024/1329 – 15/05/2024
  2006/42/EC   CEN   EN 17624:2022 Determination of explosion limits of gases and vapours at elevated pressures, elevated temperatures or with oxidizers  other than air   B   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN ISO 18497:2018 Agricultural machinery and tractors – Safety of highly automated agricultural machines – Principles for design (ISO    18497:2018)   B   02/04/2020   OJ L 102 –  02/04/2020     –       –       –
  2006/42/EC   CEN   EN ISO 19353:2016   Safety of machinery – Fire prevention and fire protection (ISO 19353:2015)   B   09/09/2016   OJ C 332 – 09/09/2016     –       –   02/10/202 1   OJ L 102 –  02/04/2020
  2006/42/EC   CEN   EN ISO 19353:2019   Safety of machinery – Fire prevention and fire protection (ISO 19353:2019)   B   02/04/2020   OJ L 102 –  02/04/2020     –       –       –
  2006/42/EC   CEN   EN ISO 20607:2019   Safety of machinery – Instruction handbook – General drafting principles (ISO 20607:2019)   B   02/04/2020   OJ L 102 –  02/04/2020     –       –       –
  2006/42/EC   CEN   EN ISO 20643:2008 Mechanical vibration – Hand-held and   hand-guided machinery – Principles for evaluation of vibration emission (ISO    20643:2005)   B   29/12/2009   OJ C 214 – 08/09/2009     –       –   31/01/201 3   OJ C 350 – 15/11/2012
  2006/42/EC   CEN   EN ISO 20643:2008, EN ISO 20643:2008/A1:2012 Mechanical vibration – Hand-held and   hand-guided machinery – Principles for evaluation of vibration emission (ISO    20643:2005)   B   15/11/2012   OJ C 350 – 15/11/2012     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN ISO 25119-1:2023, EN ISO 25119- 1:2023/A1:2023 Tractors and machinery for agriculture and forestry – Safety-related parts of control systems – Part 1: General principles for design and development (ISO 25119-1:2018)   B   15/05/2024   OJ L, 2024/1329 – 15/05/2024     –       –       –
  2006/42/EC   CEN   EN ISO 25119-2:2023 Tractors and machinery for agriculture and forestry – Safety-related parts of control systems – Part 2: Concept phase (ISO 25119-2:2019)   B   15/05/2024   OJ L, 2024/1329 – 15/05/2024     –       –       –
  2006/42/EC   CEN   EN ISO 25119-3:2023, EN ISO 25119- 3:2023/A1:2023 Tractors and machinery for agriculture and forestry – Safety-related parts of control systems – Part 3: Series development, hardware and software (ISO 25119-3:2018)   B   15/05/2024   OJ L, 2024/1329 – 15/05/2024     –       –       –
  2006/42/EC   CEN   EN ISO 25119-4:2023, EN ISO 25119- 4:2023/A1:2023 Tractors and machinery for agriculture and forestry – Safety-related parts of control systems – Part 4: Production, operation, modification and supporting processes (ISO 25119-4:2018)   B   15/05/2024   OJ L, 2024/1329 – 15/05/2024     –       –       –
  2006/42/EC   CEN   EN 30326-1:1994, EN 30326-1:1994/A1:2007 Mechanical vibration – Laboratory method for evaluating vehicle seat vibration – Part 1: Basic requirements (ISO 10326-1:1992)   B   29/12/2009   OJ C 214 – 08/09/2009     –       –   30/06/201 2   OJ C 61 –  29/02/2012
  2006/42/EC   CEN   EN 30326-1:1994, EN 30326-1:1994/A1:2007, EN 30326-1:1994/A2:2011 Mechanical vibration – Laboratory method for evaluating vehicle seat vibration – Part 1: Basic requirements (ISO 10326-1:1992)   B   29/02/2012   OJ C 61 –  29/02/2012     –       –   30/11/201 7   OJ C 183 – 09/06/2017
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 81-3:2000+A1:2008, EN 81- 3:2000+A1:2008/AC:2009   Safety rules for the construction and installation of lifts – Part 3: Electric and hydraulic service lifts   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 81-31:2010 Safety rules for the construction and installation of lifts – Lifts for the transport of goods only – Part 31: Accessible goods only lifts   C   20/10/2010   OJ C 284 – 20/10/2010     –       –       –
  2006/42/EC   CEN   EN 81-40:2008 Safety rules for the construction and installation of lifts – Special lifts for the   transport of persons and goods – Part 40: Stairlifts and inclined lifting platforms intended for persons with impaired mobility   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   15/04/202 3   OJ L 366 –  15/10/2021
  2006/42/EC   CEN   EN 81-40:2020 Safety rules for the construction and installation of lifts – Special lifts for the transport of persons and goods –  Part 40: Stairlifts and inclined lifting platforms intended for persons with impaired mobility   C   15/10/2021   OJ L 366 –  15/10/2021     –       –       –
  2006/42/EC   CEN   EN 81-41:2010 Safety rules for the construction and installation of lifts – Special lifts for the   transport of persons and goods – Part 41: Vertical lifting platforms intended for use by persons with impaired mobility   C   08/04/2011   OJ C 110 – 08/04/2011     –       –       –
  2006/42/EC   CEN   EN 81-43:2009 Safety rules for the construction and installation of lifts – Special lifts for the   transport of persons and goods – Part 43: Lifts for cranes   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 115-1:2008   Safety of escalators and moving walks – Part 1: Construction and installation   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   30/09/201 0   OJ C 136 – 26/05/2010
  2006/42/EC   CEN   EN 115-1:2017   Safety of escalators and moving walks – Part 1: Construction and installation   C   09/03/2018   OJ C 92 –  09/03/2018     –       –       –
  2006/42/EC   CEN   EN 115-1:2008+A1:2010   Safety of escalators and moving walks – Part 1: Construction and installation   C   26/05/2010   OJ C 136 – 26/05/2010     –       –   31/01/201 9   OJ C 92 –  09/03/2018
  2006/42/EC   CEN   EN 201:2009   Plastics and rubber machines – Injection moulding machines – Safety requirements   C   29/12/2009   OJ C 309 – 18/12/2009     –       –   15/04/202 3   OJ L 366 –  15/10/2021
  2006/42/EC   CEN   EN 267:2009   Automatic forced draught burners for liquid fuels   C   26/05/2010   OJ C 136 – 26/05/2010     –       –   29/02/201 2   OJ C 338 – 18/11/2011
  2006/42/EC   CEN   EN 267:2009+A1:2011   Automatic forced draught burners for liquid fuels   C   18/11/2011   OJ C 338 – 18/11/2011     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 280:2001+A2:2009 Mobile elevating work platforms – Design calculations – Stability criteria – Construction – Safety – Examinations and tests   C   29/12/2009   OJ C 309 – 18/12/2009     –       –   31/01/201 5   OJ C 348 – 28/11/2013
  2006/42/EC   CEN   EN 280:2013 Mobile elevating work platforms – Design calculations – Stability criteria – Construction – Safety – Examinations and tests   C   28/11/2013   OJ C 348 – 28/11/2013     –       –   28/02/201 7   OJ C 14 –  15/01/2016
  2006/42/EC   CEN   EN 280:2013+A1:2015 Mobile elevating work platforms – Design calculations – Stability criteria – Construction – Safety – Examinations and tests   C   15/01/2016   OJ C 14 –  15/01/2016     –       –   02/02/202 5   OJ L 194 –  02/08/2023
  2006/42/EC   CEN   EN 280-1:2022 Mobile elevating work platforms – Part   1: Design calculations – Stability criteria – Construction – Safety – Examinations    and tests   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
  2006/42/EC   CEN   EN 280-2:2022 Mobile elevating work platforms – Part 2: Additional safety requirements for load lifting appliances on the extending lifting structure and work platform   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
  2006/42/EC   CEN   EN 289:2004+A1:2008   Plastics and rubber machines – Presses – Safety requirements   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   13/02/201 5   OJ C 54 –  13/02/2015
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 289:2014 Plastics and rubber machines – Compression moulding machines and transfer moulding machines – Safety requirements   C   13/02/2015   OJ C 54 –  13/02/2015     –       –       –
  2006/42/EC   CEN   EN 303-5:2012 Heating boilers – Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW – Terminology, requirements, testing and marking   C   24/08/2012   OJ C 256 – 24/08/2012     –       –   11/10/202 3   OJ L 115 –  13/04/2022
  2006/42/EC   CEN   EN 303-5:2021 Heating boilers – Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW – Terminology, requirements, testing and marking   C   13/04/2022   OJ L 115 –  13/04/2022     –       –   02/02/202 5   OJ L 194 –  02/08/2023
  2006/42/EC   CEN   EN 303-5:2021+A1:2022 Heating boilers – Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW – Terminology, requirements, testing and marking   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
  2006/42/EC   CEN   EN 378-2:2008+A1:2009 Refrigerating systems and heat pumps –   Safety and environmental requirements – Part 2: Design, construction, testing, marking and documentation   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   30/11/201 7   OJ C 183 – 09/06/2017
  2006/42/EC   CEN   EN 378-2:2016 Refrigerating systems and heat pumps –   Safety and environmental requirements – Part 2: Design, construction, testing, marking and documentation   C   09/06/2017   OJ C 183 – 09/06/2017     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 378-2:2008+A2:2012 Refrigerating systems and heat pumps –   Safety and environmental requirements – Part 2: Design, construction, testing, marking and documentation   C   24/08/2012   OJ C 256 – 24/08/2012     –       –   30/11/201 7   OJ C 183 – 09/06/2017
  2006/42/EC   CEN   EN 415-1:2000+A1:2009 Packaging machines safety – Part 1: Terminology and classification of    packaging machines and associated equipment   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   29/02/201 6   OJ C 14 –  15/01/2016
  2006/42/EC   CEN   EN 415-1:2014 Safety of packaging machines – Part 1: Terminology and classification of packaging machines and associated equipment   C   15/01/2016   OJ C 14 –  15/01/2016     –       –       –
  2006/42/EC   CEN   EN 415-3:2021   Safety of packaging machines – Part 3: Form, fill and seal machines; fill and    seal machines   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
  2006/42/EC   CEN   EN 415-3:1999+A1:2009   Safety of packaging machines – Part 3: Form, fill and seal machines   C   29/12/2009   OJ C 309 – 18/12/2009     –       –   02/02/202 5   OJ L 194 –  02/08/2023
  2006/42/EC   CEN   EN 415-5:2006+A1:2009   Safety of packaging machines – Part 5: Wrapping machines   C   29/12/2009   OJ C 309 – 18/12/2009     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 415-6:2006+A1:2009   Safety of packaging machines – Part 6: Pallet wrapping machines   C   29/12/2009   OJ C 309 – 18/12/2009     –       –   30/11/201 3   OJ C 348 – 28/11/2013
  2006/42/EC   CEN   EN 415-6:2013   Safety of packaging machines – Part 6: Pallet wrapping machines   C   28/11/2013   OJ C 348 – 28/11/2013     –       –       –
  2006/42/EC   CEN   EN 415-7:2006+A1:2008   Safety of packaging machines – Part 7: Group and secondary packaging machines   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 415-8:2008   Safety of packaging machines – Part 8: Strapping machines   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 415-9:2009 Safety of packaging machines – Part 9: Noise measurement methods for packaging machines, packaging lines and associated equipment, grade of    accuracy 2 and 3   C   29/12/2009   OJ C 309 – 18/12/2009     –       –       –
  2006/42/EC   CEN   EN 415-10:2014   Safety of packaging machines – Part 10: General Requirements   C   11/07/2014   OJ C 220 – 11/07/2014     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 422:2009   Plastics and rubber machines – Blow moulding machines – Safety requirements   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 453:2000+A1:2009   Food processing machinery – Dough mixers – Safety and hygiene requirements   C   26/05/2010   OJ C 136 – 26/05/2010     –       –   29/02/201 6   OJ C 14 –  15/01/2016
  2006/42/EC   CEN   EN 453:2014   Food processing machinery – Dough mixers – Safety and hygiene requirements   C   15/01/2016   OJ C 14 –  15/01/2016     –       –       –
  2006/42/EC   CEN   EN 454:2000+A1:2009   Food processing machinery – Planetary mixers – Safety and hygiene requirements   C   26/05/2010   OJ C 136 – 26/05/2010     –       –   29/02/201 6   OJ C 14 –  15/01/2016
  2006/42/EC   CEN   EN 454:2014   Food processing machinery – Planetary mixers – Safety and hygiene requirements   C   15/01/2016   OJ C 14 –  15/01/2016     –       –       –
  2006/42/EC   CEN   EN 474-1:2006+A1:2009   Earth-moving machinery – Safety – Part 1: General requirements   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   28/11/201 3   OJ C 348 – 28/11/2013
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 474-1:2022   Earth-moving machinery – Safety – Part 1: General requirements   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
      2006/42/EC       CEN     EN 474-1:2006+A4:2013, EN 474- 1:2006+A4:2013/AC:2014     Earth-moving machinery – Safety – Part 1: General requirements     C       28/11/2013     OJ C 348 – 28/11/2013 Notice: This publication does not concern clause 5.8.1 Visibility — Operator’s field of view of    this standard, the application of which does not confer a presumption of conformity to the essential health and safety requirements 1.2.2 and 3.2.1 of Annex I to Directive 2006/42/EC.       13/03/2015     OJ C 87 –  13/03/2015     19/09/202 0     OJ L 286 –  07/11/2019
        2006/42/EC         CEN         EN 474-1:2006+A5:2018       Earth-moving machinery – Safety – Part 1: General requirements       C           – Notice: This publication does not concern clause 5.8.1 Visibility — Operator’s field of view of this standard,  but only in relation with EN 474- 5:2006+A3:2013 requirements for hydraulic excavators, the application of which does not confer a presumption of conformity to the essential health and safety requirements 1.2.2 and 3.2.1 of Annex I to Directive 2006/42/EC.         19/03/2019       OJ L 75 –   19/03/2019       15/10/202 1       OJ L 366 –  15/10/2021
        2006/42/EC         CEN         EN 474-1:2006+A6:2019         Earth-moving machinery – Safety – Part 1: General requirements         C           – Notice: With regards to Annex B.2 – Quick couplers, the harmonised standard EN 474- 1:2006+A6:2019 does not confer a presumption of conformity to the essential health and safety requirements 1.2.2 and 3.2.1 of    Annex I to Directive 2006/42/EC when applied in combination with EN 474-4:2006+A2:2012 requirements for backhoe loaders and EN 474-5:2006+A3:2013 requirements for hydraulic excavators.         15/10/2021         OJ L 366 –  15/10/2021         11/10/202 2         OJ L 115 –  13/04/2022
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
                  2006/42/EC                   CEN                   EN 474-1:2006+A6:2019                 Earth-moving machinery – Safety – Part 1: General requirements                 C                     – Restriction 1: This publication does not concern clause 5.8.1 Visibility-Operator’s field of view of this standard, but only in relation with EN 474- 5:2006+A3:2013 requirements for hydraulic excavators, the application of which does not confer a presumption of conformity to the essential health and safety requirements 1.2.2 and 3.2.1 of Annex I to Directive 2006/42/EC. Restriction 2: With regards to Annex B.2 – Quick couplers, the harmonised standard EN 474- 1:2006+A6:2019 does not confer a presumption of conformity to    the essential health and safety requirements 1.1.2 b), 1.1.2 c) and 1.3.3 of Annex I to Directive 2006/42/EC when applied in combination with EN 474- 4:2006+A2:2012 requirements for backhoe loaders and EN 474- 5:2006+A3:2013 requirements for hydraulic excavators.                   13/04/2022                 OJ L 115 –  13/04/2022                 02/02/202 5                 OJ L 194 –  02/08/2023
  2006/42/EC   CEN   EN 474-2:2022   Earth-moving machinery – Safety – Part 2: Requirements for tractor-dozers   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
  2006/42/EC   CEN   EN 474-2:2006+A1:2008   Earth-moving machinery – Safety – Part 2: Requirements for tractor-dozers   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   02/02/202 5   OJ L 194 –  02/08/2023
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 474-3:2022, EN 474-3:2022/AC:2022   Earth-moving machinery – Safety – Part 3: Requirements for loaders   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
  2006/42/EC   CEN   EN 474-3:2006+A1:2009   Earth-moving machinery – Safety – Part 3: Requirements for loaders   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   02/02/202 5   OJ L 194 –  02/08/2023
  2006/42/EC   CEN   EN 474-4:2022   Earth-moving machinery – Safety – Part 4: Requirements for backhoe loaders   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
  2006/42/EC   CEN   EN 474-4:2006+A2:2012   Earth-moving machinery – Safety – Part 4: Requirements for backhoe loaders   C   23/03/2012   OJ C 87 –  23/03/2012     –       –   02/02/202 5   OJ L 194 –  02/08/2023
  2006/42/EC   CEN   EN 474- 5:2006+A1:2009+A2:2012   Earth-moving machinery – Safety – Part 5: Requirements for hydraulic excavators   C   23/03/2012   OJ C 87 –  23/03/2012     –       –   31/01/201 4   OJ C 348 – 28/11/2013
  2006/42/EC   CEN   EN 474-5:2006+A3:2013   Earth-moving machinery – Safety – Part 5: Requirements for hydraulic excavators   C   28/11/2013   OJ C 348 – 28/11/2013     –       –   02/02/202 5   OJ L 194 –  02/08/2023
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 474-5:2022, EN 474-5:2022/AC:2022   Earth-moving machinery – Safety – Part 5: Requirements for hydraulic excavators   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
  2006/42/EC   CEN   EN 474-6:2022   Earth-moving machinery – Safety – Part 6: Requirements for dumpers   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
  2006/42/EC   CEN   EN 474-6:2006+A1:2009   Earth-moving machinery – Safety – Part 6: Requirements for dumpers   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   02/02/202 5   OJ L 194 –  02/08/2023
  2006/42/EC   CEN   EN 474-7:2022   Earth-moving machinery – Safety – Part 7: Requirements for scrapers   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
  2006/42/EC   CEN   EN 474-7:2006+A1:2009   Earth-moving machinery – Safety – Part 7: Requirements for scrapers   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   02/02/202 5   OJ L 194 –  02/08/2023
  2006/42/EC   CEN   EN 474-8:2022   Earth-moving machinery – Safety – Part 8: Requirements for graders   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 474-8:2006+A1:2009   Earth-moving machinery – Safety – Part 8: Requirements for graders   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   02/02/202 5   OJ L 194 –  02/08/2023
  2006/42/EC   CEN   EN 474-9:2022   Earth-moving machinery – Safety – Part 9: Requirements for pipelayers   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
  2006/42/EC   CEN   EN 474-9:2006+A1:2009   Earth-moving machinery – Safety – Part 9: Requirements for pipelayers   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   02/02/202 5   OJ L 194 –  02/08/2023
  2006/42/EC   CEN   EN 474-10:2022   Earth-moving machinery – Safety – Part 10: Requirements for trenchers   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
  2006/42/EC   CEN   EN 474-10:2006+A1:2009   Earth-moving machinery – Safety – Part 10: Requirements for trenchers   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   02/02/202 5   OJ L 194 –  02/08/2023
  2006/42/EC   CEN   EN 474-11:2022   Earth-moving machinery – Safety – Part 11: Requirements for earth- and landfill compactors   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 474-11:2006+A1:2008   Earth-moving machinery – Safety – Part 11: Requirements for earth and landfill  compactors   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   02/02/202 5   OJ L 194 –  02/08/2023
  2006/42/EC   CEN   EN 474-12:2022   Earth-moving machinery – Safety – Part 12: Requirements for cable excavators   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
  2006/42/EC   CEN   EN 474-12:2006+A1:2008   Earth-moving machinery – Safety – Part 12: Requirements for cable excavators   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   02/02/202 5   OJ L 194 –  02/08/2023
  2006/42/EC   CEN   EN 474-13:2022   Earth-moving machinery – Safety – Part 13: Requirements for rollers   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
  2006/42/EC   CEN   EN 500-1:2006+A1:2009   Mobile road construction machinery –  Safety – Part 1: Common requirements   C   26/05/2010   OJ C 136 – 26/05/2010     –       –       –
  2006/42/EC   CEN   EN 500-2:2006+A1:2008   Mobile road construction machinery – Safety – Part 2: Specific requirements  for road-milling machines   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 500-3:2006+A1:2008 Mobile road construction machinery – Safety – Part 3: Specific requirements  for soil-stabilising machines and recycling machines   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 500-4:2011   Mobile road construction machinery – Safety – Part 4: Specific requirements  for compaction machines   C   20/07/2011   OJ C 214 – 20/07/2011     –       –   02/02/202 5   OJ L 194 –  02/08/2023
  2006/42/EC   CEN   EN 500-6:2006+A1:2008   Mobile road construction machinery – Safety – Part 6: Specific requirements  for paver-finishers   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 528:2008   Rail dependent storage and retrieval equipment – Safety requirements   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   02/02/202 4   OJ L 194 –  02/08/2023
  2006/42/EC   CEN   EN 528:2021+A1:2022   Rail dependent storage and retrieval equipment – Safety requirements for S/R machines   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
  2006/42/EC   CEN   EN 536:2015   Road construction machines – Mixing   plants for road construction materials – Safety requirements   C   15/01/2016   OJ C 14 –  15/01/2016     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 609-1:2017   Agricultural and forestry machinery –  Safety of log splitters – Part 1: Wedge splitters   C   09/06/2017   OJ C 183 – 09/06/2017     –       –       –
  2006/42/EC   CEN   EN 609-1:1999+A2:2009   Agricultural and forestry machinery –  Safety of log splitters – Part 1: Wedge splitters   C   29/12/2009   OJ C 309 – 18/12/2009     –       –   30/06/201 8   OJ C 183 – 09/06/2017
  2006/42/EC   CEN   EN 609-2:1999+A1:2009   Agricultural and forestry machinery – Safety of log splitters – Part 2: Screw  splitters   C   29/12/2009   OJ C 309 – 18/12/2009     –       –       –
  2006/42/EC   CEN   EN 617:2001+A1:2010 Continuous handling equipment and systems – Safety and EMC requirements  for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers   C   08/04/2011   OJ C 110 – 08/04/2011     –       –       –
  2006/42/EC   CEN   EN 618:2002+A1:2010 Continuous handling equipment and systems – Safety and EMC requirements for equipment for mechanical handling   of bulk materials except fixed belt conveyors   C   08/04/2011   OJ C 110 – 08/04/2011     –       –       –
  2006/42/EC   CEN   EN 619:2022 Continuous handling equipment and systems – Safety requirements for equipment for mechanical handling of unit loads   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 619:2002+A1:2010 Continuous handling equipment and systems – Safety and EMC requirements for equipment for mechanical handling   of unit loads   C   08/04/2011   OJ C 110 – 08/04/2011     –       –   02/02/202 5   OJ L 194 –  02/08/2023
  2006/42/EC   CEN   EN 620:2021   Continuous handling equipment and systems – Safety requirements for fixed belt conveyors for bulk materials   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
  2006/42/EC   CEN   EN 620:2002+A1:2010 Continuous handling equipment and systems – Safety and EMC requirements for fixed belt conveyors for bulk materials   C   08/04/2011   OJ C 110 – 08/04/2011     –       –   02/02/202 5   OJ L 194 –  02/08/2023
  2006/42/EC   CEN   EN 676:2003+A2:2008, EN 676:2003+A2:2008/AC:2008   Automatic forced draught burners for gaseous fuels   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 690:1994+A1:2009   Agricultural machinery – Manure spreaders – Safety   C   29/12/2009   OJ C 309 – 18/12/2009     –       –   30/04/201 4   OJ C 110 – 11/04/2014
  2006/42/EC   CEN   EN 690:2013   Agricultural machinery – Manure spreaders – Safety   C   11/04/2014   OJ C 110 – 11/04/2014     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 692:2005+A1:2009   Machine tools – Mechanical presses – Safety   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   19/09/202 1   OJ L 286 –  07/11/2019
  2006/42/EC   CEN   EN 693:2001+A1:2009   Machine tools – Safety – Hydraulic presses   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   31/03/201 2   OJ C 338 – 18/11/2011
  2006/42/EC   CEN   EN 693:2001+A2:2011   Machine tools – Safety – Hydraulic presses   C   18/11/2011   OJ C 338 – 18/11/2011     –       –   19/03/202 1   OJ L 286 –  07/11/2019
  2006/42/EC   CEN   EN 703:2021   Agricultural machinery – Safety – Silage loading, mixing and/or chopping and distributing machines   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
  2006/42/EC   CEN   EN 703:2004+A1:2009   Agricultural machinery – Silage loading, mixing and/or chopping and distributing machines – Safety   C   29/12/2009   OJ C 309 – 18/12/2009     –       –   02/02/202 5   OJ L 194 –  02/08/2023
  2006/42/EC   CEN   EN 704:1999+A1:2009   Agricultural machinery – Pick-up balers – Safety   C   29/12/2009   OJ C 309 – 18/12/2009     –       –   30/06/201 1   OJ C 110 – 08/04/2011
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 706:1996+A1:2009   Agricultural machinery – Vine shoot tipping machines – Safety   C   29/12/2009   OJ C 309 – 18/12/2009     –       –       –
  2006/42/EC   CEN   EN 707:2018   Agricultural machinery – Slurry tankers – Safety   C   02/04/2020   OJ L 102 –  02/04/2020     –       –       –
  2006/42/EC   CEN   EN 707:1999+A1:2009   Agricultural machinery – Slurry tankers – Safety   C   29/12/2009   OJ C 309 – 18/12/2009     –       –   02/10/202 1   OJ L 102 –  02/04/2020
  2006/42/EC   CEN   EN 709:1997+A2:2009 Agricultural and forestry machinery – Pedestrian controlled tractors with mounted rotary cultivators, motor hoes, motor hoes with drive wheel(s) – Safety   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   31/12/201 0   OJ C 136 – 26/05/2010
  2006/42/EC   CEN   EN 709:1997+A4:2009, EN 709:1997+A4:2009/AC:2012 Agricultural and forestry machinery – Pedestrian controlled tractors with mounted rotary cultivators, motor hoes, motor hoes with drive wheel(s) – Safety   C   26/05/2010   OJ C 136 – 26/05/2010     –       –       –
  2006/42/EC   CEN   EN 710:1997+A1:2010, EN 710:1997+A1:2010/AC:2012   Safety requirements for foundry moulding and coremaking machinery and plant associated equipment   C   20/10/2010   OJ C 284 – 20/10/2010     –       –   02/02/202 5   OJ L 194 –  02/08/2023
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 741:2000+A1:2010 Continuous handling equipment and systems – Safety requirements for systems and their components for pneumatic handling of bulk materials   C   08/04/2011   OJ C 110 – 08/04/2011     –       –       –
  2006/42/EC   CEN   EN 745:1999+A1:2009   Agricultural machinery – Rotary mowers and flail-mowers – Safety   C   29/12/2009   OJ C 309 – 18/12/2009     –       –   31/12/201 2   OJ C 256 – 24/08/2012
  2006/42/EC   CEN   EN 746-1:1997+A1:2009   Industrial thermoprocessing equipment – Part 1: Common safety requirements for industrial thermoprocessing equipment   C   29/12/2009   OJ C 309 – 18/12/2009     –       –       –
  2006/42/EC   CEN   EN 746-2:2010   Industrial thermoprocessing equipment – Part 2: Safety requirements for combustion and fuel handling systems   C   20/10/2010   OJ C 284 – 20/10/2010     –       –       –
  2006/42/EC   CEN   EN 746-3:2021   Industrial thermoprocessing equipment – Part 3: Safety requirements for the generation and use of atmosphere gases   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
  2006/42/EC   CEN   EN 746-3:1997+A1:2009   Industrial thermoprocessing equipment – Part 3: Safety requirements for the generation and use of atmosphere gases   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   02/02/202 5   OJ L 194 –  02/08/2023
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 786:1996+A2:2009 Garden equipment – Electrically powered walk-behind and hand-held lawn trimmers and lawn edge trimmers – Mechanical safety   C   29/12/2009   OJ C 309 – 18/12/2009     –       –   19/09/202 0   OJ L 286 –  07/11/2019
  2006/42/EC   CEN   EN 791:1995+A1:2009   Drill rigs – Safety   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   13/02/201 5   OJ C 54 –  13/02/2015
  2006/42/EC   CEN   EN 792-1:2000+A1:2008 Hand-held non-electric power tools – Safety requirements – Part 1: Assembly power tools for non-threaded mechanical fasteners   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   24/08/201 2   OJ C 256 – 24/08/2012
  2006/42/EC   CEN   EN 792-2:2000+A1:2008   Hand-held non-electric power tools – Safety requirements – Part 2: Cutting-off and crimping power tools   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   30/06/201 2   OJ C 61 –  29/02/2012
  2006/42/EC   CEN   EN 792-3:2000+A1:2008   Hand-held non-electric power tools – Safety requirements – Part 3: Drills and tappers   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   30/04/201 1   OJ C 110 – 08/04/2011
  2006/42/EC   CEN   EN 792-4:2000+A1:2008   Hand-held non-electric power tools – Safety requirements – Part 4: Non-rotary percussive power tools   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   30/04/201 1   OJ C 110 – 08/04/2011
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 792-5:2000+A1:2008   Hand-held non-electric power tools – Safety requirements – Part 5: Rotary  percussive drills   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   30/06/201 2   OJ C 61 –  29/02/2012
  2006/42/EC   CEN   EN 792-6:2000+A1:2008   Hand-held non-electric power tools – Safety requirements – Part 6: Assembly power tools for threaded fasteners   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   30/04/201 1   OJ C 110 – 08/04/2011
  2006/42/EC   CEN   EN 792-7:2001+A1:2008   Hand-held non-electric power tools –   Safety requirements – Part 7: Grinders   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   28/02/201 3   OJ C 350 – 15/11/2012
  2006/42/EC   CEN   EN 792-8:2001+A1:2008   Hand-held non-electric power tools –  Safety requirements – Part 8: Sanders and polishers   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   30/06/201 2   OJ C 61 –  29/02/2012
  2006/42/EC   CEN   EN 792-9:2001+A1:2008   Hand-held non-electric power tools – Safety requirements – Part 9: Die grinders   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   01/06/201 2   OJ C 61 –  29/02/2012
  2006/42/EC   CEN   EN 792-10:2000+A1:2008   Hand-held non-electric power tools – Safety requirements – Part 10: Compression power tools   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   30/06/201 2   OJ C 61 –  29/02/2012
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 792-11:2000+A1:2008   Hand-held non-electric power tools – Safety requirements – Part 11: Nibblers and shears   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   30/06/201 2   OJ C 61 –  29/02/2012
  2006/42/EC   CEN   EN 792-12:2000+A1:2008 Hand-held non-electric power tools – Safety requirements – Part 12: Small  circular, small oscillating and reciprocating saws   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   30/06/201 3   OJ C 99 –  05/04/2013
  2006/42/EC   CEN   EN 792-13:2000+A1:2008   Hand-held non-electric power tools – Safety requirements – Part 13: Fastener driving tools   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   02/10/202 1   OJ L 102 –  02/04/2020
  2006/42/EC   CEN   EN 809:1998+A1:2009, EN 809:1998+A1:2009/AC:2010   Pumps and pump units for liquids – Common safety requirements   C   29/12/2009   OJ C 309 – 18/12/2009     –       –       –
  2006/42/EC   CEN   EN 815:1996+A2:2008   Safety of unshielded tunnel boring machines and rodless shaft boring machines for rock – Safety requirements   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   13/02/201 5   OJ C 54 –  13/02/2015
  2006/42/EC   CEN   EN 818-1:1996+A1:2008   Short link chain for lifting purposes –  Safety – Part 1: General conditions of acceptance   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 818-2:1996+A1:2008   Short link chain for lifting purposes – Safety – Part 2: Medium tolerance chain for chain slings – Grade 8   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 818-3:1999+A1:2008   Short link chain for lifting purposes – Safety – Part 3: Medium tolerance chain for chain slings – Grade 4   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 818-4:1996+A1:2008   Short link chain for lifting purposes –   Safety – Part 4: Chain slings – Grade 8   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 818-5:1999+A1:2008   Short link chain for lifting purposes –   Safety – Part 5: Chain slings – Grade 4   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 818-6:2000+A1:2008 Short link chain for lifting purposes – Safety – Part 6: Chain slings – Specification for information for use and maintenance to be provided by the manufacturer   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 818-7:2002+A1:2008   Short link chain for lifting purposes – Safety – Part 7: Fine tolerance hoist chain, Grade T (Types T, DAT and DT)   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 836:1997+A4:2011   Garden equipment – Powered lawnmowers – Safety   C   18/11/2011   OJ C 338 – 18/11/2011     –       –   30/09/201 4   OJ C 348 – 28/11/2013
  2006/42/EC   CEN   EN 848-1:2007+A1:2009 Safety of woodworking machines – One side moulding machines with rotating tool – Part 1: Single spindle vertical moulding machines   C   29/12/2009   OJ C 309 – 18/12/2009     –       –   31/03/201 3   OJ C 350 – 15/11/2012
  2006/42/EC   CEN   EN 848-1:2007+A2:2012 Safety of woodworking machines – One side moulding machines with rotating tool – Part 1: Single spindle vertical moulding machines   C   15/11/2012   OJ C 350 – 15/11/2012     –       –   19/09/202 0   OJ L 286 –  07/11/2019
  2006/42/EC   CEN   EN 848-2:2007+A1:2009 Safety of woodworking machines – One side moulding machines with rotating tool – Part 2: Single spindle hand fed/integrated fed routing machines   C   29/12/2009   OJ C 309 – 18/12/2009     –       –   31/03/201 3   OJ C 350 – 15/11/2012
  2006/42/EC   CEN   EN 848-2:2007+A2:2012 Safety of woodworking machines – One side moulding machines with rotating tool – Part 2: Single spindle hand fed/integrated fed routing machines   C   15/11/2012   OJ C 350 – 15/11/2012     –       –       –
  2006/42/EC   CEN   EN 848-3:2007+A2:2009 Safety of woodworking machines – One side moulding machines with rotating tools – Part 3: Numerically controlled (NC) boring and routing machines   C   29/12/2009   OJ C 309 – 18/12/2009     –       –   30/04/201 3   OJ C 99 –  05/04/2013
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 848-3:2012 Safety of woodworking machines – One side moulding machines with rotating tool – Part 3: Numerically controlled (NC) boring and routing machines   C   05/04/2013   OJ C 99 –  05/04/2013     –       –   02/10/202 1   OJ L 102 –  02/04/2020
  2006/42/EC   CEN   EN 859:2007+A1:2009   Safety of woodworking machines – Hand fed surface planing machines   C   26/05/2010   OJ C 136 – 26/05/2010     –       –   31/12/201 2   OJ C 256 – 24/08/2012
  2006/42/EC   CEN   EN 859:2007+A2:2012   Safety of woodworking machines – Hand fed surface planing machines   C   24/08/2012   OJ C 256 – 24/08/2012     –       –   02/10/202 1   OJ L 102 –  02/04/2020
  2006/42/EC   CEN   EN 860:2007+A1:2009   Safety of woodworking machines – One side thickness planing machines   C   29/12/2009   OJ C 309 – 18/12/2009     –       –   31/12/201 2   OJ C 256 – 24/08/2012
  2006/42/EC   CEN   EN 860:2007+A2:2012   Safety of woodworking machines – One side thickness planing machines   C   24/08/2012   OJ C 256 – 24/08/2012     –       –   02/10/202 1   OJ L 102 –  02/04/2020
  2006/42/EC   CEN   EN 861:2007+A1:2009   Safety of woodworking machines – Surface planing and thicknessing    machines   C   29/12/2009   OJ C 309 – 18/12/2009     –       –   31/12/201 2   OJ C 256 – 24/08/2012
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 861:2007+A2:2012   Safety of woodworking machines – Surface planing and thicknessing    machines   C   24/08/2012   OJ C 256 – 24/08/2012     –       –   02/10/202 1   OJ L 102 –  02/04/2020
  2006/42/EC   CEN   EN 869:2006+A1:2009   Safety of machinery – Safety requirements for pressure metal diecasting units   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 908:1999+A1:2009   Agricultural and forestry machinery – Reel machines for irrigation – Safety   C   29/12/2009   OJ C 309 – 18/12/2009     –       –       –
  2006/42/EC   CEN   EN 909:1998+A1:2009   Agricultural and forestry machinery – Centre pivot and moving lateral types irrigation machines – Safety   C   29/12/2009   OJ C 309 – 18/12/2009     –       –       –
  2006/42/EC   CEN   EN 930:1997+A2:2009 Footwear, leather and imitation leather goods manufacturing machines – Roughing, scouring, polishing and trimming machines – Safety requirements   C   29/12/2009   OJ C 309 – 18/12/2009     –       –       –
  2006/42/EC   CEN   EN 931:1997+A2:2009   Footwear manufacturing machines – Lasting machines – Safety requirements   C   29/12/2009   OJ C 309 – 18/12/2009     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 940:2009   Safety of woodworking machines – Combined woodworking machines   C   29/12/2009   OJ C 309 – 18/12/2009     –       –   31/08/201 2   OJ C 159 – 05/06/2012
  2006/42/EC   CEN   EN 940:2009+A1:2012   Safety of woodworking machines – Combined woodworking machines   C   05/06/2012   OJ C 159 – 05/06/2012     –       –   03/09/202 2   OJ L 72 –   03/03/2021
  2006/42/EC   CEN   EN 957-6:2010+A1:2014   Stationary training equipment – Part 6: Treadmills, additional specific safety   requirements and test methods   C   13/02/2015   OJ C 54 –  13/02/2015     –       –       –
  2006/42/EC   CEN   EN 972:1998+A1:2010, EN 972:1998+A1:2010/AC:2011   Tannery machines – Reciprocating roller machines – Safety requirements   C   08/04/2011   OJ C 110 – 08/04/2011     –       –       –
  2006/42/EC   CEN   EN 996:1995+A3:2009   Piling equipment – Safety requirements   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   13/02/201 5   OJ C 54 –  13/02/2015
  2006/42/EC   CEN   EN 1010-1:2004+A1:2010 Safety of machinery – Safety requirements for the design and construction of printing and paper converting machines – Part 1: Common requirements   C   08/04/2011   OJ C 110 – 08/04/2011     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 1010-2:2006+A1:2010 Safety of machinery – Safety requirements for the design and construction of printing and paper converting machines – Part 2: Printing   and varnishing machines including pre- press machinery   C   08/04/2011   OJ C 110 – 08/04/2011     –       –       –
  2006/42/EC   CEN   EN 1010-3:2002+A1:2009 Safety of machinery – Safety requirements for the design and construction of printing and paper converting machines – Part 3: Cutting machines   C   29/12/2009   OJ C 309 – 18/12/2009     –       –       –
  2006/42/EC   CEN   EN 1010-4:2004+A1:2009 Safety of machinery – Safety requirements for the design and construction of printing and paper converting machines – Part 4: Bookbinding, paper converting and finishing machines   C   29/12/2009   OJ C 309 – 18/12/2009     –       –       –
  2006/42/EC   CEN   EN 1012-1:2010   Compressors and vacuum pumps – Safety requirements – Part 1: Air    compressors   C   08/04/2011   OJ C 110 – 08/04/2011     –       –       –
  2006/42/EC   CEN   EN 1012-2:1996+A1:2009   Compressors and vacuum pumps – Safety requirements – Part 2: Vacuum pumps   C   29/12/2009   OJ C 309 – 18/12/2009     –       –       –
  2006/42/EC   CEN   EN 1012-3:2013   Compressors and vacuum pumps – Safety requirements – Part 3: Process compressors   C   11/04/2014   OJ C 110 – 11/04/2014     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 1028-1:2002+A1:2008 Fire-fighting pumps – Fire-fighting centrifugal pumps with primer – Part 1: Classification – General and safety requirements   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 1028-2:2002+A1:2008 Fire-fighting pumps – Fire-fighting centrifugal pumps with primer – Part 2: Verification of general and safety requirements   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 1034-1:2000+A1:2010 Safety of machinery – Safety requirements for the design and construction of paper making and finishing machines – Part 1: Common requirements   C   26/05/2010   OJ C 136 – 26/05/2010     –       –       –
  2006/42/EC   CEN   EN 1034-2:2005+A1:2009 Safety of machinery – Safety requirements for the design and construction of paper making and finishing machines – Part 2: Barking drums   C   26/05/2010   OJ C 136 – 26/05/2010     –       –       –
  2006/42/EC   CEN   EN 1034-3:1999+A1:2009 Safety of machinery – Safety requirements for the design and construction of paper making and finishing machines – Part 3: Winders and slitters, plying machines   C   26/05/2010   OJ C 136 – 26/05/2010     –       –   30/06/201 2   OJ C 61 –  29/02/2012
  2006/42/EC   CEN   EN 1034-3:2011 Safety of machinery – Safety requirements for the design and construction of paper making and finishing machines – Part 3: Rereelers and winders   C   29/02/2012   OJ C 61 –  29/02/2012     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 1034-4:2021 Safety of machinery – Safety requirements for the design and    construction of paper making and finishing machines – Part 4: Pulpers and their loading facilities   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
  2006/42/EC   CEN   EN 1034-4:2005+A1:2009 Safety of machinery – Safety requirements for the design and    construction of paper making and finishing machines – Part 4: Pulpers and their loading facilities   C   26/05/2010   OJ C 136 – 26/05/2010     –       –   02/02/202 5   OJ L 194 –  02/08/2023
  2006/42/EC   CEN   EN 1034-5:2005+A1:2009 Safety of machinery – Safety requirements for the design and    construction of paper making and finishing machines – Part 5: Sheeters   C   26/05/2010   OJ C 136 – 26/05/2010     –       –       –
  2006/42/EC   CEN   EN 1034-6:2005+A1:2009 Safety of machinery – Safety requirements for the design and    construction of paper making and finishing machines – Part 6: Calender   C   26/05/2010   OJ C 136 – 26/05/2010     –       –       –
  2006/42/EC   CEN   EN 1034-7:2005+A1:2009 Safety of machinery – Safety requirements for the design and construction of paper making and   finishing machines – Part 7: Chests   C   26/05/2010   OJ C 136 – 26/05/2010     –       –       –
  2006/42/EC   CEN   EN 1034-8:2012 Safety of machinery – Safety requirements for the design and construction of paper making and finishing machines – Part 8: Refining plants   C   05/06/2012   OJ C 159 – 05/06/2012     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 1034-13:2005+A1:2009 Safety of machinery – Safety requirements for the design and    construction of paper making and finishing machines – Part 13: Machines for de-wiring bales and units   C   26/05/2010   OJ C 136 – 26/05/2010     –       –       –
  2006/42/EC   CEN   EN 1034-14:2005+A1:2009 Safety of machinery – Safety requirements for the design and construction of paper making and  finishing machines – Part 14: Reel splitter   C   26/05/2010   OJ C 136 – 26/05/2010     –       –       –
  2006/42/EC   CEN   EN 1034-16:2012 Safety of machinery – Safety requirements for the design and    construction of paper making and finishing machines – Part 16: Paper and board making machines   C   05/06/2012   OJ C 159 – 05/06/2012     –       –       –
  2006/42/EC   CEN   EN 1034-17:2012 Safety of machinery – Safety requirements for the design and construction of paper making and finishing machines – Part 17: Tissue making machines   C   15/11/2012   OJ C 350 – 15/11/2012     –       –       –
  2006/42/EC   CEN   EN 1034-21:2012 Safety of machinery – Safety requirements for the design and construction of paper making and finishing machines – Part 21: Coating machines   C   15/11/2012   OJ C 350 – 15/11/2012     –       –       –
  2006/42/EC   CEN   EN 1034-22:2005+A1:2009 Safety of machinery – Safety requirements for the design and construction of paper making and    finishing machines – Part 22: Wood Grinders   C   26/05/2010   OJ C 136 – 26/05/2010     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 1034-26:2012 Safety of machinery – Safety requirements for the design and construction of paper making and finishing machines – Part 26: Roll packaging machines   C   24/08/2012   OJ C 256 – 24/08/2012     –       –       –
  2006/42/EC   CEN   EN 1034-27:2012 Safety of machinery – Safety requirements for the design and construction of paper making and finishing machines – Part 27: Roll handling systems   C   15/11/2012   OJ C 350 – 15/11/2012     –       –       –
  2006/42/EC   CEN   EN 1114-1:2011   Plastics and rubber machines – Extruders and extrusion lines – Part 1: Safety requirements for extruders   C   29/02/2012   OJ C 61 –  29/02/2012     –       –       –
  2006/42/EC   CEN   EN 1114-2:1998+A1:2008   Plastics and rubber machines – Extruders and extrusion lines – Part 2: Safety requirements for die face pelletisers   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   20/10/201 0   OJ C 284 – 20/10/2010
  2006/42/EC   CEN   EN 1114-3:2019   Plastics and rubber machines – Extruders and extrusion lines – Part 3: Safety requirements for haul-offs   C   02/04/2020   OJ L 102 –  02/04/2020     –       –       –
  2006/42/EC   CEN   EN 1114-3:2001+A1:2008   Plastics and rubber machines – Extruders and extrusion lines – Part 3: Safety requirements for haul-offs   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   02/10/202 1   OJ L 102 –  02/04/2020
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 1175:2020   Safety of industrial trucks – Electrical/electronic requirements   C   15/10/2021   OJ L 366 –  15/10/2021     –       –       –
  2006/42/EC   CEN   EN 1175-1:1998+A1:2010   Safety of industrial trucks – Electrical requirements – Part 1: General requirements for battery powered trucks   C   08/04/2011   OJ C 110 – 08/04/2011     –       –   15/04/202 3   OJ L 366 –  15/10/2021
  2006/42/EC   CEN   EN 1175-2:1998+A1:2010 Safety of industrial trucks – Electrical requirements – Part 2: General requirements of internal combustion engine powered trucks   C   08/04/2011   OJ C 110 – 08/04/2011     –       –   15/04/202 3   OJ L 366 –  15/10/2021
  2006/42/EC   CEN   EN 1175-3:1998+A1:2010 Safety of industrial trucks – Electrical requirements – Part 3: Specific requirements for the electric power transmission systems of internal combustion engine powered trucks   C   08/04/2011   OJ C 110 – 08/04/2011     –       –   15/04/202 3   OJ L 366 –  15/10/2021
  2006/42/EC   CEN   EN 1218-1:1999+A1:2009   Safety of woodworking machines – Tenoning machines – Part 1: Single end tenoning machines with sliding table   C   29/12/2009   OJ C 309 – 18/12/2009     –       –   15/11/202 5   OJ L, 2024/1329 – 15/05/2024
  2006/42/EC   CEN   EN 1218-2:2004+A1:2009 Safety of woodworking machines – Tenoning machines – Part 2: Double end tenoning and/or profiling machines fed    by chain or chains   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   15/11/202 5   OJ L, 2024/1329 – 15/05/2024
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 1218-3:2001+A1:2009 Safety of woodworking machines – Tenoning machines – Part 3: Hand fed tenoning machines with sliding table for cutting structural timbers   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 1218-4:2004+A2:2009   Safety of woodworking machines – Tenoning machines – Part 4: Edge   banding machines fed by chain(s)   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   31/03/201 6   OJ C 14 –  15/01/2016
  2006/42/EC   CEN   EN 1218-5:2004+A1:2009 Safety of woodworking machines – Tenoning machines – Part 5: One side    profiling machines with fixed table and feed rollers or feed chain   C   29/12/2009   OJ C 309 – 18/12/2009     –       –   15/11/202 5   OJ L, 2024/1329 – 15/05/2024
  2006/42/EC   CEN   EN 1247:2004+A1:2010 Foundry machinery – Safety requirements for ladles, pouring equipment, centrifugal casting    machines, continuous and semi  continuous casting machines   C   08/04/2011   OJ C 110 – 08/04/2011     –       –       –
  2006/42/EC   CEN   EN 1248:2001+A1:2009   Foundry machinery – Safety requirements for abrasive blasting equipment   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 1265:1999+A1:2008   Safety of machinery – Noise test code for foundry machines and equipment   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 1374:2000+A1:2010   Agricultural machinery – Silos stationary unloaders for round silos – Safety   C   20/10/2010   OJ C 284 – 20/10/2010     –       –       –
  2006/42/EC   CEN   EN 1398:2009   Dock levellers – Safety requirements   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 1417:1996+A1:2008, EN 1417:1996+A1:2008/AC:2009   Plastics and rubber machines – Two roll mills – Safety requirements   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   31/12/201 6   OJ C 14 –  15/01/2016
  2006/42/EC   CEN   EN 1417:2014   Plastics and rubber machines – Two-roll mills – Safety requirements   C   15/01/2016   OJ C 14 –  15/01/2016     –       –   15/11/202 5   OJ L, 2024/1329 – 15/05/2024
  2006/42/EC   CEN   EN 1417:2023   Plastics and rubber machines – Two-roll mills – Safety requirements   C   15/05/2024   OJ L, 2024/1329 – 15/05/2024     –       –       –
  2006/42/EC   CEN   EN 1459:1998+A3:2012   Safety of industrial trucks – Self- propelled variable reach trucks   C   23/03/2012   OJ C 87 –  23/03/2012     –       –   30/09/201 8   OJ C 92 –  09/03/2018
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 1459-1:2017   Rough-terrain trucks – Safety requirements and verification – Part 1: Variable-reach trucks   C   09/03/2018   OJ C 92 –  09/03/2018     –       –       –
  2006/42/EC   CEN   EN 1459-2:2015   Rough-terrain trucks – Safety requirements and verification – Part 2: Slewing variable-reach trucks   C   15/01/2016   OJ C 14 –  15/01/2016     –       –   02/10/202 1   OJ L 102 –  02/04/2020
  2006/42/EC   CEN   EN 1459-2:2015+A1:2018   Rough-terrain trucks – Safety requirements and verification – Part 2: Slewing variable-reach trucks   C   02/04/2020   OJ L 102 –  02/04/2020     –       –       –
  2006/42/EC   CEN   EN 1459-5:2020   Rough-terrain trucks – Safety requirements and verification – Part 5: Attachment interface   C   15/10/2021   OJ L 366 –  15/10/2021     –       –       –
  2006/42/EC   CEN   EN 1492-1:2000+A1:2008   Textile slings – Safety – Part 1: Flat    woven webbing slings made of man- made fibres for general purpose use   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 1492-2:2000+A1:2008   Textile slings – Safety – Part 2: Roundslings made of man-made fibres for general purpose use   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 1492-4:2004+A1:2008   Textile slings – Safety – Part 4: Lifting slings for general service made from    natural and man-made fibre ropes   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 1493:1998+A1:2008   Vehicle lifts   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   08/04/201 1   OJ C 110 – 08/04/2011
  2006/42/EC   CEN   EN 1493:2010   Vehicle lifts   C   08/04/2011   OJ C 110 – 08/04/2011     –       –       –
  2006/42/EC   CEN   EN 1494:2000+A1:2008   Mobile or movable jacks and associated lifting equipment   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
    2006/42/EC     CEN     EN 1495:1997+A2:2009, EN 1495:1997+A2:2009/AC:2010     Lifting platforms – Mast climbing work platforms     C         – Restriction: This publication does not concern paragraph 5.3.2.4, the last subparagraph of 7.1.2.12, table 8 and figure 9 of standard EN 1495:1997, in respect of which it grants no presumption of conformity to the provisions of Directive 2006/42/EC.     18/12/2009     OJ C 309 – 18/12/2009         –
  2006/42/EC   CEN   EN 1501-1:1998+A2:2009 Refuse collection vehicles and their associated lifting devices – General requirements and safety requirements –    Part 1: Rear-end loaded refuse collection vehicles   C   29/12/2009   OJ C 321 – 29/12/2009     –       –   29/02/201 2   OJ C 338 – 18/11/2011
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 1501-1:2011 Refuse collection vehicles – General requirements and safety requirements – Part 1: Rear loaded refuse collection vehicles   C   18/11/2011   OJ C 338 – 18/11/2011     –       –   29/02/201 6   OJ C 14 –  15/01/2016
  2006/42/EC   CEN   EN 1501-1:2021 Refuse collection vehicles – General requirements and safety requirements – Part 1: Rear loaded refuse collection vehicles   C   13/04/2022   OJ L 115 –  13/04/2022     –       –       –
  2006/42/EC   CEN   EN 1501-1:2011+A1:2015 Refuse collection vehicles – General requirements and safety requirements – Part 1: Rear loaded refuse collection vehicles   C   15/01/2016   OJ C 14 –  15/01/2016     –       –   11/10/202 3   OJ L 115 –  13/04/2022
  2006/42/EC   CEN   EN 1501-2:2021 Refuse collection vehicles – General requirements and safety requirements – Part 2: Side loaded refuse collection vehicles   C   13/04/2022   OJ L 115 –  13/04/2022     –       –       –
  2006/42/EC   CEN   EN 1501-2:2005+A1:2009 Refuse collection vehicles and associated lifting devices – General requirements and safety requirements – Part 2: Side loaded refuse collection vehicles   C   29/12/2009   OJ C 321 – 29/12/2009     –       –   11/10/202 3   OJ L 115 –  13/04/2022
  2006/42/EC   CEN   EN 1501-3:2008 Refuse collection vehicles and their associated lifting devices – General requirements and safety requirements – Part 3: Front loaded refuse collection vehicles   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   11/10/202 3   OJ L 115 –  13/04/2022
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 1501-3:2021 Refuse collection vehicles – General requirements and safety requirements – Part 3: Front loaded refuse collection vehicles   C   13/04/2022   OJ L 115 –  13/04/2022     –       –       –
  2006/42/EC   CEN   EN 1501-4:2007 Refuse collection vehicles and their associated lifting devices – General requirements and safety requirements – Part 4: Noise test code for refuse collection vehicles   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   15/11/202 5   OJ L, 2024/1329 – 15/05/2024
  2006/42/EC   CEN   EN 1501-4:2023 Refuse collection vehicles – General requirements and safety requirements – Part 4: Noise test code for refuse collection vehicles   C   15/05/2024   OJ L, 2024/1329 – 15/05/2024     –       –       –
  2006/42/EC   CEN   EN 1501-5:2011 Refuse collection vehicles – General requirements and safety requirements – Part 5: Lifting devices for refuse collection vehicles   C   18/11/2011   OJ C 338 – 18/11/2011     –       –   11/10/202 3   OJ L 115 –  13/04/2022
  2006/42/EC   CEN   EN 1501-5:2021 Refuse collection vehicles – General requirements and safety requirements – Part 5: Lifting devices for refuse collection vehicles   C   13/04/2022   OJ L 115 –  13/04/2022     –       –       –
  2006/42/EC   CEN   EN 1526:1997+A1:2008   Safety of industrial trucks – Additional    requirements for automated functions on trucks   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 1539:2009   Dryers and ovens, in which flammable substances are released – Safety requirements   C   26/05/2010   OJ C 136 – 26/05/2010     –       –   13/05/201 6   OJ C 173 – 13/05/2016
  2006/42/EC   CEN   EN 1539:2015   Dryers and ovens, in which flammable substances are released – Safety requirements   C   13/05/2016   OJ C 173 – 13/05/2016     –       –       –
  2006/42/EC   CEN   EN 1547:2001+A1:2009 Industrial thermoprocessing equipment – Noise test code for industrial thermoprocessing equipment including its ancillary handling equipment   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 1550:1997+A1:2008   Machine-tools safety – Safety requirements for the design and construction of work holding chucks   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 1554:2012   Conveyor belts – Drum friction testing   C   24/08/2012   OJ C 256 – 24/08/2012     –       –       –
  2006/42/EC   CEN   EN 1570:1998+A2:2009   Safety requirements for lifting tables   C   29/12/2009   OJ C 309 – 18/12/2009     –       –   30/04/201 2   OJ C 61 –  29/02/2012
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 1570-1:2011   Safety requirements for lifting tables –  Part 1: Lifting tables serving up to two fixed landings   C   29/02/2012   OJ C 61 –  29/02/2012     –       –   13/05/201 6   OJ C 173 – 13/05/2016
  2006/42/EC   CEN   EN 1570-1:2024   Safety requirements for lifting tables –  Part 1: Lifting tables serving up to two fixed landing   C   16/09/2024   OJ L, 2024/2408 – 16/09/2024     –       –       –
  2006/42/EC   CEN   EN 1570-1:2011+A1:2014   Safety requirements for lifting tables –  Part 1: Lifting tables serving up to two fixed landings   C   13/05/2016   OJ C 173 – 13/05/2016     –       –   16/03/202 6   OJ L, 2024/2408 – 16/09/2024
  2006/42/EC   CEN   EN 1570-2:2016 Safety requirements for lifting tables – Part 2: Lifting tables serving more than   2 fixed landings of a building, for lifting goods with a vertical travel speed not exceeding 0,15 m/s   C   09/06/2017   OJ C 183 – 09/06/2017     –       –       –
  2006/42/EC   CEN   EN 1612:2019   Plastics and rubber machines – Reaction moulding machines and plants – Safety   requirements   C   03/03/2021   OJ L 72 –   03/03/2021     –       –       –
  2006/42/EC   CEN   EN 1612-1:1997+A1:2008 Plastics and rubber machines – Reaction moulding machines – Part 1: Safety requirements for metering and mixing units   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   03/09/202 2   OJ L 72 –   03/03/2021
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 1672-2:2005+A1:2009   Food processing machinery – Basic concepts – Part 2: Hygiene requirements   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 1673:2000+A1:2009   Food processing machinery – Rotary rack ovens – Safety and hygiene requirements   C   26/05/2010   OJ C 136 – 26/05/2010     –       –       –
  2006/42/EC   CEN   EN 1674:2000+A1:2009   Food processing machinery – Dough and pastry brakes – Safety and hygiene requirements   C   26/05/2010   OJ C 136 – 26/05/2010     –       –   31/03/201 6   OJ C 14 –  15/01/2016
  2006/42/EC   CEN   EN 1674:2015   Food processing machinery – Dough sheeters – Safety and hygiene requirements   C   15/01/2016   OJ C 14 –  15/01/2016     –       –       –
  2006/42/EC   CEN   EN 1677-1:2000+A1:2008   Components for slings – Safety – Part 1: Forged steel components, Grade 8   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 1677-2:2000+A1:2008   Components for slings – Safety – Part 2: Forged steel lifting hooks with latch, Grade 8   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 1677-3:2001+A1:2008   Components for slings – Safety – Part 3: Forged steel self-locking hooks – Grade 8   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 1677-4:2000+A1:2008   Components for slings – Safety – Part 4: Links, Grade 8   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 1677-5:2001+A1:2008   Components for slings – Safety – Part 5: Forged steel lifting hooks with latch – Grade 4   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 1677-6:2001+A1:2008   Components for slings – Safety – Part 6: Links – Grade 4   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 1678:1998+A1:2010   Food processing machinery – Vegetable cutting machines – Safety and hygiene    requirements   C   20/10/2010   OJ C 284 – 20/10/2010     –       –       –
  2006/42/EC   CEN   EN 1679-1:1998+A1:2011   Reciprocating internal combustion engines – Safety – Part 1: Compression ignition engines   C   20/07/2011   OJ C 214 – 20/07/2011     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 1710:2005+A1:2008, EN 1710:2005+A1:2008/AC:2010   Equipment and components intended for use in potentially explosive atmospheres in underground mines   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   19/03/202 0   OJ L 286 –  07/11/2019
  2006/42/EC   CEN   EN 1755:2000+A1:2009   Safety of industrial trucks – Operation in potentially explosive atmospheres – Use  in flammable gas, vapour, mist and dust   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   28/11/201 3   OJ C 348 – 28/11/2013
  2006/42/EC   CEN   EN 1755:2000+A2:2013   Safety of industrial trucks – Operation in potentially explosive atmospheres – Use  in flammable gas, vapour, mist and dust   C   28/11/2013   OJ C 348 – 28/11/2013     –       –   02/02/202 4   OJ L 194 –  02/08/2023
  2006/42/EC   CEN   EN 1756-1:2021   Tail lifts – Platform lifts for mounting on wheeled vehicles – Safety requirements – Part 1: Tail lifts for goods   C   13/04/2022   OJ L 115 –  13/04/2022     –       –       –
  2006/42/EC   CEN   EN 1756-1:2001+A1:2008   Tail lifts – Platform lifts for mounting on wheeled vehicles – Safety requirements – Part 1: Tail lifts for goods   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   11/10/202 3   OJ L 115 –  13/04/2022
  2006/42/EC   CEN   EN 1756-2:2004+A1:2009   Tail lifts – Platform lifts for mounting on wheeled vehicles – Safety requirements – Part 2: Tail lifts for passengers   C   29/12/2009   OJ C 309 – 18/12/2009     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 1777:2004+A1:2009   Hydraulic platforms (HPs) for fire    fighting and rescue services – Safety requirements and testing   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   30/09/201 0   OJ C 136 – 26/05/2010
  2006/42/EC   CEN   EN 1777:2010   Hydraulic platforms (HPs) for fire    fighting and rescue services – Safety requirements and testing   C   26/05/2010   OJ C 136 – 26/05/2010     –       –       –
  2006/42/EC   CEN   EN 1804-1:2020 Machines for underground mines – Safety requirements for hydraulic powered roof supports – Part 1: Support units and general requirements   C   15/10/2021   OJ L 366 –  15/10/2021     –       –       –
  2006/42/EC   CEN   EN 1804-1:2001+A1:2010 Machines for underground mines – Safety requirements for hydraulic powered roof supports – Part 1: Support units and general requirements   C   26/05/2010   OJ C 136 – 26/05/2010     –       –   15/04/202 3   OJ L 366 –  15/10/2021
  2006/42/EC   CEN   EN 1804-2:2020 Machines for underground mines – Safety requirements for hydraulic powered roof supports – Part 2: Power set legs and rams   C   15/10/2021   OJ L 366 –  15/10/2021     –       –       –
  2006/42/EC   CEN   EN 1804-2:2001+A1:2010 Machines for underground mines – Safety requirements for hydraulic powered roof supports – Part 2: Power set legs and rams   C   26/05/2010   OJ C 136 – 26/05/2010     –       –   15/04/202 3   OJ L 366 –  15/10/2021
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 1804-3:2020 Machines for underground mines – Safety requirements for hydraulic   powered roof supports – Part 3: Hydraulic and electro hydraulic control systems   C   15/10/2021   OJ L 366 –  15/10/2021     –       –       –
  2006/42/EC   CEN   EN 1804-3:2006+A1:2010 Machines for underground mines – Safety requirements for hydraulic   powered roof supports – Part 3: Hydraulic control systems   C   26/05/2010   OJ C 136 – 26/05/2010     –       –   15/04/202 3   OJ L 366 –  15/10/2021
  2006/42/EC   CEN   EN 1807:1999+A1:2009   Safety of woodworking machines – Band sawing machines   C   29/12/2009   OJ C 309 – 18/12/2009     –       –   28/11/201 3   OJ C 348 – 28/11/2013
  2006/42/EC   CEN   EN 1807-1:2013   Safety of woodworking machines – Band sawing machines – Part 1: Table band saws and band re-saws   C   28/11/2013   OJ C 348 – 28/11/2013     –       –   02/02/202 5   OJ L 194 –  02/08/2023
  2006/42/EC   CEN   EN 1807-2:2013   Safety of woodworking machines –   Band sawing machines – Part 2: Log sawing machines   C   28/11/2013   OJ C 348 – 28/11/2013     –       –       –
  2006/42/EC   CEN   EN 1808:1999+A1:2010 Safety requirements on Suspended Access Equipment – Design calculations, stability criteria, construction – Tests   C   20/10/2010   OJ C 284 – 20/10/2010     –       –   13/05/201 6   OJ C 173 – 13/05/2016
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 1808:2015 Safety requirements for suspended access equipment – Design calculations, stability criteria, construction – Examinations and tests   C   13/05/2016   OJ C 173 – 13/05/2016     –       –       –
  2006/42/EC   CEN   EN 1829-1:2010   High pressure water jet machines – Safety requirements – Part 1: Machines   C   26/05/2010   OJ C 136 – 26/05/2010     –       –   11/10/202 3   OJ L 115 –  13/04/2022
  2006/42/EC   CEN   EN 1829-1:2021   High-pressure water jet machines – Safety requirements – Part 1: Machines   C   13/04/2022   OJ L 115 –  13/04/2022     –       –       –
  2006/42/EC   CEN   EN 1829-2:2008, EN 1829-2:2008/AC:2011   High-pressure water jet machines –   Safety requirements – Part 2: Hoses, hose lines and connectors   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 1845:2007   Footwear manufacturing machines –    Footwear moulding machines – Safety requirements   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 1846-2:2001+A3:2009   Firefighting and rescue service vehicles  – Part 2: Common requirements – Safety and performance   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   28/02/201 1   OJ C 309 – 18/12/2009
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 1846-2:2009   Firefighting and rescue service vehicles  – Part 2: Common requirements – Safety and performance   C   29/12/2009   OJ C 309 – 18/12/2009     –       –   28/11/201 3   OJ C 348 – 28/11/2013
  2006/42/EC   CEN   EN 1846-2:2009+A1:2013   Firefighting and rescue service vehicles  – Part 2: Common requirements – Safety and performance   C   28/11/2013   OJ C 348 – 28/11/2013     –       –       –
  2006/42/EC   CEN   EN 1846-3:2002+A1:2008   Firefighting and rescue service vehicles – Part 3: Permanently installed equipment – Safety and performance   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   31/01/201 4   OJ C 348 – 28/11/2013
  2006/42/EC   CEN   EN 1846-3:2013   Firefighting and rescue service vehicles – Part 3: Permanently installed equipment – Safety and performance   C   28/11/2013   OJ C 348 – 28/11/2013     –       –       –
  2006/42/EC   CEN   EN 1853:2017   Agricultural machinery – Trailers – Safety   C   19/03/2019   OJ L 75 –   19/03/2019     –       –       –
  2006/42/EC   CEN   EN 1853:1999+A1:2009   Agricultural machinery – Trailers with tipping body – Safety   C   29/12/2009   OJ C 309 – 18/12/2009     –       –   19/09/202 0   OJ L 286 –  07/11/2019
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 1870-1:2007+A1:2009 Safety of woodworking machines – Circular sawing machines – Part 1: Circular saw benches (with and without sliding table), dimension saws and building site saws   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   31/05/201 4   OJ C 110 – 11/04/2014
  2006/42/EC   CEN   EN 1870-3:2001+A1:2009 Safety of woodworking machines – Circular sawing machines – Part 3: Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 1870-4:2001+A1:2009 Safety of woodworking machines – Circular sawing machines – Part 4: Multiblade rip sawing machines with manual loading and/or unloading   C   29/12/2009   OJ C 309 – 18/12/2009     –       –   30/09/201 2   OJ C 159 – 05/06/2012
  2006/42/EC   CEN   EN 1870-4:2012 Safety of woodworking machines – Circular sawing machines – Part 4: Multiblade rip sawing machines with manual loading and/or unloading   C   05/06/2012   OJ C 159 – 05/06/2012     –       –   03/09/202 2   OJ L 72 –   03/03/2021
  2006/42/EC   CEN   EN 1870-5:2002+A1:2009 Safety of woodworking machines – Circular sawing machines – Part 5: Circular sawbenches/up-cutting cross- cut sawing machines   C   29/12/2009   OJ C 309 – 18/12/2009     –       –   31/03/201 3   OJ C 350 – 15/11/2012
  2006/42/EC   CEN   EN 1870-5:2002+A2:2012 Safety of woodworking machines – Circular sawing machines – Part 5: Circular sawbenches/up-cutting cross- cut sawing machines   C   15/11/2012   OJ C 350 – 15/11/2012     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 1870-6:2017   Safety of woodworking machines – Circular sawing machines – Part 6: Circular sawing machines for fire wood   C   19/03/2019   OJ L 75 –   19/03/2019     –       –       –
    2006/42/EC     CEN     EN 1870-6:2002+A1:2009 Safety of woodworking machines – Circular sawing machines – Part 6: Circular sawing machines for firewood and dual purpose circular sawing machines for firewood/circular saw   benches, with manual loading and/or unloading   C     29/12/2009   OJ C 309 – 18/12/2009     –       –   19/09/202 0   OJ L 286 –  07/11/2019
  2006/42/EC   CEN   EN 1870-7:2002+A1:2009 Safety of woodworking machines – Circular sawing machines – Part 7: Single blade log sawing machines with    integrated feed table and manual loading and/or unloading   C   29/12/2009   OJ C 309 – 18/12/2009     –       –   30/04/201 3   OJ C 99 –  05/04/2013
  2006/42/EC   CEN   EN 1870-7:2012 Safety of woodworking machines – Circular sawing machines – Part 7: Single blade log sawing machines with    integrated feed table and manual loading and/or unloading   C   05/04/2013   OJ C 99 –  05/04/2013     –       –       –
  2006/42/EC   CEN   EN 1870-8:2001+A1:2009 Safety of woodworking machines – Circular sawing machines – Part 8: Single blade edging circular rip sawing machines with power driven saw unit    and manual loading and/or unloading   C   29/12/2009   OJ C 309 – 18/12/2009     –       –   31/05/201 3   OJ C 99 –  05/04/2013
  2006/42/EC   CEN   EN 1870-8:2012 Safety of woodworking machines – Circular sawing machines – Part 8: Single blade edging circular rip sawing machines with power driven saw unit    and manual loading and/or unloading   C   05/04/2013   OJ C 99 –  05/04/2013     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 1870-9:2000+A1:2009 Safety of woodworking machines – Circular sawing machines – Part 9: Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading   C   29/12/2009   OJ C 309 – 18/12/2009     –       –   31/03/201 3   OJ C 350 – 15/11/2012
  2006/42/EC   CEN   EN 1870-9:2012 Safety of woodworking machines – Circular sawing machines – Part 9: Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading   C   15/11/2012   OJ C 350 – 15/11/2012     –       –       –
  2006/42/EC   CEN   EN 1870-10:2003+A1:2009 Safety of woodworking machines – Circular sawing machines – Part 10: Single blade automatic and semi- automatic up-cutting cross-cut sawing machines   C   29/12/2009   OJ C 309 – 18/12/2009     –       –   30/11/201 3   OJ C 348 – 28/11/2013
  2006/42/EC   CEN   EN 1870-10:2013 Safety of woodworking machines – Circular sawing machines – Part 10: Single blade automatic and semi- automatic up-cutting cross-cut sawing machines   C   28/11/2013   OJ C 348 – 28/11/2013     –       –       –
  2006/42/EC   CEN   EN 1870-11:2003+A1:2009 Safety of woodworking machines –  Circular sawing machines – Part 11: Semi-automatic and automatic horizontal cross-cut sawing machines with one saw unit (radial arm saws)   C   29/12/2009   OJ C 309 – 18/12/2009     –       –   30/04/201 4   OJ C 110 – 11/04/2014
  2006/42/EC   CEN   EN 1870-11:2013 Safety of woodworking machines –  Circular sawing machines – Part 11: Semi automatic horizontal cross-cut sawing machines with one saw unit  (radial arm saws)   C   11/04/2014   OJ C 110 – 11/04/2014     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 1870-12:2003+A1:2009   Safety of woodworking machines – Circular sawing machines – Part 12:    Pendulum cross-cut sawing machines   C   29/12/2009   OJ C 309 – 18/12/2009     –       –   30/04/201 4   OJ C 110 – 11/04/2014
  2006/42/EC   CEN   EN 1870-12:2013   Safety of woodworking machines – Circular sawing machines – Part 12:    Pendulum cross-cut sawing machines   C   11/04/2014   OJ C 110 – 11/04/2014     –       –       –
  2006/42/EC   CEN   EN 1870-13:2007+A1:2009   Safety of woodworking machines – Circular sawing machines – Part 13: Horizontal beam panel sawing machines   C   29/12/2009   OJ C 309 – 18/12/2009     –       –   30/09/201 2   OJ C 159 – 05/06/2012
  2006/42/EC   CEN   EN 1870-13:2007+A2:2012   Safety of woodworking machines – Circular sawing machines – Part 13: Horizontal beam panel sawing machines   C   05/06/2012   OJ C 159 – 05/06/2012     –       –   19/09/202 0   OJ L 286 –  07/11/2019
  2006/42/EC   CEN   EN 1870-14:2007+A1:2009   Safety of woodworking machines –  Circular sawing machines – Part 14: Vertical panel sawing machines   C   29/12/2009   OJ C 309 – 18/12/2009     –       –   30/09/201 2   OJ C 159 – 05/06/2012
  2006/42/EC   CEN   EN 1870-14:2007+A2:2012   Safety of woodworking machines –  Circular sawing machines – Part 14: Vertical panel sawing machines   C   05/06/2012   OJ C 159 – 05/06/2012     –       –   19/09/202 0   OJ L 286 –  07/11/2019
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 1870-15:2004+A1:2009 Safety of woodworking machines – Circular sawing machines – Part 15: Multiblade cross-cut sawing machines with integrated feed of the workpiece   and manual loading and/or unloading   C   29/12/2009   OJ C 309 – 18/12/2009     –       –   30/04/201 3   OJ C 99 –  05/04/2013
  2006/42/EC   CEN   EN 1870-15:2012 Safety of woodworking machines – Circular sawing machines – Part 15: Multi-blade cross-cut sawing machines with integrated feed of the workpiece    and manual loading and/or unloading   C   05/04/2013   OJ C 99 –  05/04/2013     –       –       –
  2006/42/EC   CEN   EN 1870-16:2005+A1:2009 Safety of woodworking machines – Circular sawing machines – Part 16:    Double mitre sawing machines for V- cutting   C   29/12/2009   OJ C 309 – 18/12/2009     –       –   30/04/201 3   OJ C 99 –  05/04/2013
  2006/42/EC   CEN   EN 1870-16:2012 Safety of woodworking machines –    Circular sawing machines – Part 16:   Double mitre sawing machines for V cutting   C   05/04/2013   OJ C 99 –  05/04/2013     –       –       –
  2006/42/EC   CEN   EN 1870-17:2007+A2:2009 Safety of woodworking machines –  Circular sawing machines – Part 17: Manual horizontal cutting cross-cut sawing machines with one saw unit  (manual radial arm saws)   C   29/12/2009   OJ C 309 – 18/12/2009     –       –   13/05/201 6   OJ C 173 – 13/05/2016
      2006/42/EC       CEN       EN 1870-17:2012     Safety of woodworking machines –  Circular sawing machines – Part 17: Manual horizontal cutting cross-cut sawing machines with one saw unit  (radial arm saws)       C         – Warning: with regards to the choice of guards of the saw blade, this publication does not  concern paragraphs 3 of clauses 5.3.6.1 of this standard, the application of which does not confer a presumption of conformity to the essential health and safety requirements 1.4.2 of Annex I to Directive 2006/42/EC.       13/02/2015       OJ C 54 –  13/02/2015       13/05/201 6       OJ C 173 – 13/05/2016
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 1870-17:2012+A1:2015 Safety of woodworking machines –  Circular sawing machines – Part 17: Manual horizontal cutting cross-cut sawing machines with one saw unit  (radial arm saws)   C   13/05/2016   OJ C 173 – 13/05/2016     –       –       –
  2006/42/EC   CEN   EN 1870-18:2013   Safety of woodworking machines –  Circular sawing machines – Part 18: Dimension saws   C   28/11/2013   OJ C 348 – 28/11/2013     –       –   30/06/201 8   OJ C 92 –  09/03/2018
  2006/42/EC   CEN   EN 1870-19:2013 Safety of woodworking machines – Circular sawing machines – Part 19: Circular saw benches (with and without sliding table) and building site saws   C   11/04/2014   OJ C 110 – 11/04/2014     –       –   03/09/202 2   OJ L 72 –   03/03/2021
  2006/42/EC   CEN   EN 1889-1:2011   Machines for underground mines – Mobile machines working underground – Safety – Part 1: Rubber tyred vehicles   C   18/11/2011   OJ C 338 – 18/11/2011     –       –   02/10/202 1   OJ L 102 –  02/04/2020
  2006/42/EC   CEN   EN 1889-2:2003+A1:2009   Machines for underground mines – Mobile machines working underground – Safety – Part 2: Rail locomotives   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 1915-1:2001+A1:2009   Aircraft ground support equipment – General requirements – Part 1: Basic safety requirements   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   28/11/201 3   OJ C 348 – 28/11/2013
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 1915-1:2013   Aircraft ground support equipment – General requirements – Part 1: Basic safety requirements   C   28/11/2013   OJ C 348 – 28/11/2013     –       –   15/11/202 5   OJ L, 2024/1329 – 15/05/2024
  2006/42/EC   CEN   EN 1915-1:2023   Aircraft ground support equipment – General requirements – Part 1: Basic safety requirements   C   15/05/2024   OJ L, 2024/1329 – 15/05/2024     –       –       –
  2006/42/EC   CEN   EN 1915-2:2001+A1:2009 Aircraft ground support equipment – General requirements – Part 2: Stability and strength requirements, calculations and test methods   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 1915-3:2004+A1:2009   Aircraft ground support equipment – General requirements – Part 3: Vibration measurement methods and reduction   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 1915-4:2004+A1:2009   Aircraft ground support equipment –  General requirements – Part 4: Noise measurement methods and reduction   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 1953:1998+A1:2009   Atomising and spraying equipment for  coating materials – Safety requirements   C   29/12/2009   OJ C 309 – 18/12/2009     –       –   31/03/201 4   OJ C 348 – 28/11/2013
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 1953:2013   Atomising and spraying equipment for  coating materials – Safety requirements   C   28/11/2013   OJ C 348 – 28/11/2013     –       –       –
  2006/42/EC   CEN   EN 1974:2020   Food processing machinery – Slicing machines – Safety and hygiene requirements   C   15/10/2021   OJ L 366 –  15/10/2021     –       –       –
  2006/42/EC   CEN   EN 1974:1998+A1:2009   Food processing machinery – Slicing machines – Safety and hygiene requirements   C   29/12/2009   OJ C 309 – 18/12/2009     –       –   15/04/202 3   OJ L 366 –  15/10/2021
  2006/42/EC   CEN   EN ISO 2151:2008 Acoustics – Noise test code for compressors and vacuum pumps – Engineering method (Grade 2) (ISO 2151:2004)   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN ISO 2860:2008   Earth-moving machinery – Minimum access dimensions (ISO 2860:1992)   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN ISO 2867:2008   Earth-moving machinery – Access systems (ISO 2867:2006, including Cor 1:2008)   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   31/07/201 4   OJ C 338 – 18/11/2011
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN ISO 2867:2011   Earth-moving machinery – Access systems (ISO 2867:2011)   C   18/11/2011   OJ C 338 – 18/11/2011     –       –       –
  2006/42/EC   CEN   EN ISO 3164:2008 Earth-moving machinery – Laboratory evaluations of protective structures –    Specifications for deflection-limiting   volume (ISO 3164:1995)   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   30/11/201 3   OJ C 348 – 28/11/2013
  2006/42/EC   CEN   EN ISO 3164:2013 Earth-moving machinery – Laboratory evaluations of protective structures –    Specifications for deflection-limiting   volume (ISO 3164:2013)   C   28/11/2013   OJ C 348 – 28/11/2013     –       –   16/03/202 6   OJ L, 2024/2408 – 16/09/2024
  2006/42/EC   CEN   EN ISO 3164:2013, EN ISO 3164:2013/A1:2024 Earth-moving machinery – Laboratory evaluations of protective structures –    Specifications for deflection-limiting   volume (ISO 3164:2013)   C   16/09/2024   OJ L, 2024/2408 – 16/09/2024     –       –       –
  2006/42/EC   CEN   EN ISO 3266:2010   Forged steel eyebolts grade 4 for general lifting purposes (ISO 3266:2010)   C   20/10/2010   OJ C 284 – 20/10/2010     –       –   30/06/201 6   OJ C 173 – 13/05/2016
  2006/42/EC   CEN   EN ISO 3266:2010, EN ISO 3266:2010/A1:2015   Forged steel eyebolts grade 4 for general lifting purposes (ISO 3266:2010)   C   13/05/2016   OJ C 173 – 13/05/2016     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN ISO 3411:2007 Earth-moving machinery – Physical dimensions of operators and minimum operator space envelope (ISO 3411:2007)   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN ISO 3449:2008 Earth-moving machinery – Falling- object protective structures – Laboratory tests and performance requirements (ISO 3449:2005)   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN ISO 3450:2008 Earth-moving machinery – Braking systems of rubber-tyred machines – Systems and performance requirements and test procedures (ISO 3450:1996)   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   31/05/201 2   OJ C 61 –  29/02/2012
  2006/42/EC   CEN   EN ISO 3450:2011 Earth-moving machinery – Wheeled or high-speed rubber-tracked machines –   Performance requirements and test procedures for brake systems (ISO 3450:2011)   C   29/02/2012   OJ C 61 –  29/02/2012     –       –       –
  2006/42/EC   CEN   EN ISO 3457:2008   Earth-moving machinery – Guards – Definitions and requirements (ISO   3457:2003)   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN ISO 3471:2008 Earth-moving machinery – Roll-over    protective structures – Laboratory tests and performance requirements (ISO 3471:2008)   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN ISO 3691-1:2015, EN ISO 3691-1:2015/AC:2016 Industrial trucks – Safety requirements   and verification – Part 1: Self-propelled industrial trucks, other than driverless    trucks, variable-reach trucks and burden-carrier trucks (ISO 3691-1:2011, including Cor 1:2013)   C   15/01/2016   OJ C 14 –  15/01/2016     –       –   03/09/202 2   OJ L 72 –   03/03/2021
  2006/42/EC   CEN EN ISO 3691-1:2015, EN ISO 3691- 1:2015/AC:2016, EN ISO 3691-1:2015/A1:2020 Industrial trucks – Safety requirements   and verification – Part 1: Self-propelled industrial trucks, other than driverless    trucks, variable-reach trucks and burden-carrier trucks (ISO 3691-1:2011, including Cor 1:2013)   C   03/03/2021   OJ L 72 –   03/03/2021     –       –       –
  2006/42/EC   CEN   EN ISO 3691-4:2023 Industrial trucks – Safety requirements and verification – Part 4: Driverless industrial trucks and their systems (ISO 3691-4:2023)   C   15/05/2024   OJ L, 2024/1329 – 15/05/2024     –       –       –
  2006/42/EC   CEN   EN ISO 3691-5:2009   Industrial trucks – Safety requirements and verification – Part 5: Pedestrian- propelled trucks (ISO 3691-5:2009)   C   28/11/2013   OJ C 348 – 28/11/2013     –       –   31/08/201 4   OJ C 220 – 11/07/2014
  2006/42/EC   CEN   EN ISO 3691-5:2014, EN ISO 3691-5:2014/AC:2014   Industrial trucks – Safety requirements and verification – Part 5: Pedestrian- propelled trucks (ISO 3691-5:2014)   C   11/07/2014   OJ C 220 – 11/07/2014     –       –   02/10/202 1   OJ L 102 –  02/04/2020
  2006/42/EC   CEN   EN ISO 3691-5:2015   Industrial trucks – Safety requirements and verification – Part 5: Pedestrian- propelled trucks (ISO 3691-5:2014)   C   02/04/2020   OJ L 102 –  02/04/2020     –       –   03/09/202 2   OJ L 72 –   03/03/2021
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN ISO 3691-5:2015, EN ISO 3691-5:2015/A1:2020   Industrial trucks – Safety requirements and verification – Part 5: Pedestrian- propelled trucks (ISO 3691-5:2014)   C   03/03/2021   OJ L 72 –   03/03/2021     –       –       –
  2006/42/EC   CEN   EN ISO 3691-6:2013, EN ISO 3691-6:2013/AC:2014   Industrial trucks – Safety requirements and verification – Part 6: Burden and personnel carriers (ISO 3691-6:2013)   C   11/07/2014   OJ C 220 – 11/07/2014     –       –   13/05/201 6   OJ C 173 – 13/05/2016
  2006/42/EC   CEN   EN ISO 3691-6:2015, EN ISO 3691-6:2015/AC:2016   Industrial trucks – Safety requirements and verification – Part 6: Burden and personnel carriers (ISO 3691-6:2013)   C   13/05/2016   OJ C 173 – 13/05/2016     –       –   02/02/202 5   OJ L 194 –  02/08/2023
  2006/42/EC   CEN   EN ISO 3691-6:2021   Industrial trucks – Safety requirements and verification – Part 6: Burden and personnel carriers (ISO 3691-6:2021)   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
  2006/42/EC   CEN   EN ISO 4254-1:2009, EN ISO 4254-1:2009/AC:2010   Agricultural machinery – Safety – Part 1: General requirements (ISO 4254- 1:2008)   C   29/12/2009   OJ C 309 – 18/12/2009     –       –   30/11/201 3   OJ C 348 – 28/11/2013
  2006/42/EC   CEN   EN ISO 4254-1:2013   Agricultural machinery – Safety – Part 1: General requirements (ISO 4254- 1:2013)   C   28/11/2013   OJ C 348 – 28/11/2013     –       –   13/05/201 6   OJ C 173 – 13/05/2016
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN ISO 4254-1:2015   Agricultural machinery – Safety – Part 1: General requirements (ISO 4254- 1:2013)   C   13/05/2016   OJ C 173 – 13/05/2016     –       –   02/02/202 5   OJ L 194 –  02/08/2023
  2006/42/EC   CEN   EN ISO 4254-1:2015, EN ISO 4254-1:2015/A1:2021   Agricultural machinery – Safety – Part 1: General requirements (ISO 4254- 1:2013)   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
  2006/42/EC   CEN   EN ISO 4254-5:2009, EN ISO 4254-5:2009/AC:2010   Agricultural machinery – Safety – Part 5: Power-driven soil-working machines (ISO 4254-5:2008)   C   26/05/2010   OJ C 136 – 26/05/2010     –       –   19/09/202 0   OJ L 286 –  07/11/2019
  2006/42/EC   CEN   EN ISO 4254-5:2018   Agricultural machinery – Safety – Part 5: Power-driven soil-working machines (ISO 4254-5:2018)   C   19/03/2019   OJ L 75 –   19/03/2019     –       –       –
  2006/42/EC   CEN   EN ISO 4254-6:2009, EN ISO 4254-6:2009/AC:2010   Agricultural machinery – Safety – Part 6: Sprayers and liquid fertilizer distributors (ISO 4254-6:2009)   C   26/05/2010   OJ C 136 – 26/05/2010     –       –   02/02/202 5   OJ L 194 –  02/08/2023
  2006/42/EC   CEN   EN ISO 4254-6:2020, EN ISO 4254- 6:2020/A11:2021   Agricultural machinery – Safety – Part 6: Sprayers and liquid fertilizer distributors (ISO 4254-6:2020)   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN ISO 4254-7:2009, EN ISO 4254-7:2009/AC:2010 Agricultural machinery – Safety – Part 7: Combine harvesters, forage harvesters and cotton harvesters (ISO 4254- 7:2008)   C   26/05/2010   OJ C 136 – 26/05/2010     –       –   19/09/202 0   OJ L 286 –  07/11/2019
  2006/42/EC   CEN   EN ISO 4254-7:2017 Agricultural machinery – Safety – Part 7: Combine harvesters, forage harvesters, cotton harvesters and sugar cane harversters (ISO 4254-7:2017)   C   19/03/2019   OJ L 75 –   19/03/2019     –       –       –
  2006/42/EC   CEN   EN ISO 4254-8:2018   Agricultural machinery – Safety – Part 8: Solid fertilizer distributors (ISO 4254- 8:2018)   C   19/03/2019   OJ L 75 –   19/03/2019     –       –       –
  2006/42/EC   CEN   EN ISO 4254-9:2018   Agricultural machinery – Safety – Part 9: Seed drills (ISO 4254-9:2018)   C   02/04/2020   OJ L 102 –  02/04/2020     –       –       –
  2006/42/EC   CEN   EN ISO 4254-10:2009, EN ISO 4254- 10:2009/AC:2010   Agricultural machinery – Safety – Part 10: Rotary tedders and rakes (ISO 4254- 10:2009)   C   26/05/2010   OJ C 136 – 26/05/2010     –       –       –
  2006/42/EC   CEN   EN ISO 4254-11:2010   Agricultural machinery – Safety – Part   11: Pick-up balers (ISO 4254-11:2010)   C   08/04/2011   OJ C 110 – 08/04/2011     –       –   03/09/202 2   OJ L 72 –   03/03/2021
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN ISO 4254-11:2010, EN ISO 4254- 11:2010/A1:2020   Agricultural machinery – Safety – Part   11: Pick-up balers (ISO 4254-11:2010)   C   03/03/2021   OJ L 72 –   03/03/2021     –       –       –
  2006/42/EC   CEN   EN ISO 4254-12:2012   Agricultural machinery – Safety – Part 12: Rotary disc and drum mowers and flail mowers (ISO 4254-12:2012)   C   24/08/2012   OJ C 256 – 24/08/2012     –       –   30/06/201 8   OJ C 92 –  09/03/2018
  2006/42/EC   CEN   EN ISO 4254-12:2012, EN ISO 4254- 12:2012/A1:2017   Agricultural machinery – Safety – Part 12: Rotary disc and drum mowers and flail mowers (ISO 4254-12:2012)   C   09/03/2018   OJ C 92 –  09/03/2018     –       –       –
  2006/42/EC   CEN   EN ISO 4254-14:2016   Agricultural machinery – Safety – Part   14: Bale wrappers (ISO 4254-14:2016)   C   09/09/2016   OJ C 332 – 09/09/2016     –       –       –
  2006/42/EC   CEN   EN ISO 4254-17:2022   Agricultural machinery – Safety – Part 17: Root crop harvesters (ISO 4254-   17:2022)   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
  2006/42/EC   CEN   EN ISO 5010:2019   Earth-moving machinery – Wheeled machines – Steering requirements (ISO 5010:2019)   C   03/03/2021   OJ L 72 –   03/03/2021     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN ISO 5395-1:2013 Garden equipment – Safety requirements for combustion-engine-powered lawnmowers – Part 1: Terminology and common tests (ISO 5395-1:2013)   C   28/11/2013   OJ C 348 – 28/11/2013     –       –   19/09/202 0   OJ L 286 –  07/11/2019
  2006/42/EC   CEN   EN ISO 5395-1:2013, EN ISO 5395-1:2013/A1:2018 Garden equipment – Safety requirements for combustion-engine-powered lawnmowers – Part 1: Terminology and common tests (ISO 5395-1:2013)   C   19/03/2019   OJ L 75 –   19/03/2019     –       –       –
  2006/42/EC   CEN   EN ISO 5395-2:2013 Garden equipment – Safety requirements for combustion-engine-powered lawnmowers – Part 2: Pedestrian- controlled lawnmowers (ISO 5395- 2:2013)   C   28/11/2013   OJ C 348 – 28/11/2013     –       –   30/06/201 7   OJ C 183 – 09/06/2017
  2006/42/EC   CEN   EN ISO 5395-2:2013, EN ISO 5395-2:2013/A1:2016 Garden equipment – Safety requirements for combustion-engine-powered lawnmowers – Part 2: Pedestrian- controlled lawnmowers (ISO 5395- 2:2013)   C   09/06/2017   OJ C 183 – 09/06/2017     –       –   30/06/201 8   OJ C 92 –  09/03/2018
  2006/42/EC   CEN   EN ISO 5395-2:2013, EN ISO 5395-2:2013/A1:2016, EN ISO 5395-2:2013/A2:2017 Garden equipment – Safety requirements for combustion-engine-powered lawnmowers – Part 2: Pedestrian- controlled lawnmowers (ISO 5395- 2:2013)   C   09/03/2018   OJ C 92 –  09/03/2018     –       –       –
  2006/42/EC   CEN   EN ISO 5395-3:2013 Garden equipment – Safety requirements for combustion-engine-powered lawnmowers – Part 3: Ride-on lawnmowers with seated operator (ISO 5395-3:2013)   C   28/11/2013   OJ C 348 – 28/11/2013     –       –   31/08/201 7   OJ C 183 – 09/06/2017
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN ISO 5395-3:2013, EN ISO 5395-3:2013/A1:2017 Garden equipment – Safety requirements for combustion-engine-powered lawnmowers – Part 3: Ride-on lawnmowers with seated operator (ISO 5395-3:2013)   C   09/06/2017   OJ C 183 – 09/06/2017     –       –   19/09/202 0   OJ L 286 –  07/11/2019
  2006/42/EC   CEN   EN ISO 5395-3:2013, EN ISO 5395-3:2013/A1:2017, EN ISO 5395-3:2013/A2:2018 Garden equipment – Safety requirements for combustion-engine-powered lawnmowers – Part 3: Ride-on lawnmowers with seated operator (ISO 5395-3:2013)   C   19/03/2019   OJ L 75 –   19/03/2019     –       –       –
  2006/42/EC   CEN   EN ISO 5674:2009 Tractors and machinery for agriculture    and forestry – Guards for power take-off (PTO) drive-shafts – Strength and wear   tests and acceptance criteria (ISO 5674:2004, corrected version 2005-07- 01)   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN ISO 6682:2008   Earth-moving machinery – Zones of comfort and reach for controls (ISO  6682:1986, including Amd 1:1989)   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN ISO 6683:2008   Earth-moving machinery – Seat belts and seat belt anchorages – Performance  requirements and tests (ISO 6683:2005)   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN ISO 7096:2008, EN ISO 7096:2008/AC:2009   Earth-moving machinery – Laboratory evaluation of operator seat vibration    (ISO 7096:2000)   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   03/09/202 2   OJ L 72 –   03/03/2021
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN ISO 7096:2020   Earth-moving machinery – Laboratory evaluation of operator seat vibration    (ISO 7096:2020)   C   03/03/2021   OJ L 72 –   03/03/2021     –       –       –
  2006/42/EC   CEN   EN ISO 8230-1:2008   Safety requirements for dry-cleaning machines – Part 1: Common safety requirements (ISO 8230-1:2008)   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN ISO 8230-2:2008   Safety requirements for dry-cleaning machines – Part 2: Machines using perchloroethylene (ISO 8230-2:2008)   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN ISO 8230-3:2008   Safety requirements for dry-cleaning machines – Part 3: Machines using combustible solvents (ISO 8230-3:2008)   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN ISO 8528-10:2022 Reciprocating internal combustion engine driven alternating current generating sets – Part 10: Measurement of airborne noise (ISO 8528-10:2022)   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
  2006/42/EC   CEN   EN ISO 8528-13:2016 Reciprocating internal combustion engine driven alternating current generating sets – Part 13: Safety (ISO 8528-13:2016, Corrected version 2016- 10-15)   C   09/09/2016   OJ C 332 – 09/09/2016     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN ISO 9902-1:2001, EN ISO 9902-1:2001/A1:2009   Textile machinery – Noise test code – Part 1: Common requirements (ISO   9902-1:2001)   C   29/12/2009   OJ C 309 – 18/12/2009     –       –   29/02/201 6   OJ C 14 –  15/01/2016
  2006/42/EC   CEN   EN ISO 9902-1:2001, EN ISO 9902-1:2001/A1:2009, EN ISO 9902-1:2001/A2:2014   Textile machinery – Noise test code – Part 1: Common requirements (ISO   9902-1:2001)   C   15/01/2016   OJ C 14 –  15/01/2016     –       –       –
  2006/42/EC   CEN   EN ISO 9902-2:2001, EN ISO 9902-2:2001/A1:2009   Textile machinery – Noise test code – Part 2: Spinning preparatory and spinning machinery (ISO 9902-2:2001)   C   29/12/2009   OJ C 309 – 18/12/2009     –       –   13/02/201 5   OJ C 54 –  13/02/2015
  2006/42/EC   CEN   EN ISO 9902-2:2001, EN ISO 9902-2:2001/A1:2009, EN ISO 9902-2:2001/A2:2014   Textile machinery – Noise test code – Part 2: Spinning preparatory and spinning machinery (ISO 9902-2:2001)   C   13/02/2015   OJ C 54 –  13/02/2015     –       –       –
  2006/42/EC   CEN   EN ISO 9902-3:2001, EN ISO 9902-3:2001/A1:2009   Textile machinery – Noise test code – Part 3: Nonwoven machinery (ISO 9902-3:2001)   C   29/12/2009   OJ C 309 – 18/12/2009     –       –   13/02/201 5   OJ C 54 –  13/02/2015
  2006/42/EC   CEN   EN ISO 9902-3:2001, EN ISO 9902-3:2001/A1:2009, EN ISO 9902-3:2001/A2:2014   Textile machinery – Noise test code – Part 3: Nonwoven machinery (ISO 9902-3:2001)   C   13/02/2015   OJ C 54 –  13/02/2015     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN ISO 9902-4:2001, EN ISO 9902-4:2001/A1:2009 Textile machinery – Noise test code – Part 4: Yarn processing, cordage and rope manufacturing machinery (ISO  9902-4:2001)   C   29/12/2009   OJ C 309 – 18/12/2009     –       –   13/02/201 5   OJ C 54 –  13/02/2015
  2006/42/EC   CEN   EN ISO 9902-4:2001, EN ISO 9902-4:2001/A1:2009, EN ISO 9902-4:2001/A2:2014 Textile machinery – Noise test code – Part 4: Yarn processing, cordage and rope manufacturing machinery (ISO  9902-4:2001)   C   13/02/2015   OJ C 54 –  13/02/2015     –       –       –
  2006/42/EC   CEN   EN ISO 9902-5:2001, EN ISO 9902-5:2001/A1:2009 Textile machinery – Noise test code – Part 5: Weaving and knitting preparatory machinery (ISO 9902- 5:2001)   C   29/12/2009   OJ C 309 – 18/12/2009     –       –   13/02/201 5   OJ C 54 –  13/02/2015
  2006/42/EC   CEN   EN ISO 9902-5:2001, EN ISO 9902-5:2001/A1:2009, EN ISO 9902-5:2001/A2:2014 Textile machinery – Noise test code – Part 5: Weaving and knitting preparatory machinery (ISO 9902- 5:2001)   C   13/02/2015   OJ C 54 –  13/02/2015     –       –       –
  2006/42/EC   CEN   EN ISO 9902-6:2001, EN ISO 9902-6:2001/A1:2009   Textile machinery – Noise test code – Part 6: Fabric manufacturing machinery (ISO 9902-6:2001)   C   29/12/2009   OJ C 309 – 18/12/2009     –       –   13/02/201 5   OJ C 54 –  13/02/2015
  2006/42/EC   CEN   EN ISO 9902-6:2001, EN ISO 9902-6:2001/A1:2009, EN ISO 9902-6:2001/A2:2014   Textile machinery – Noise test code – Part 6: Fabric manufacturing machinery (ISO 9902-6:2001)   C   13/02/2015   OJ C 54 –  13/02/2015     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN ISO 9902-7:2001, EN ISO 9902-7:2001/A1:2009   Textile machinery – Noise test code – Part 7: Dyeing and finishing machinery (ISO 9902-7:2001)   C   29/12/2009   OJ C 309 – 18/12/2009     –       –   13/02/201 5   OJ C 54 –  13/02/2015
  2006/42/EC   CEN   EN ISO 9902-7:2001, EN ISO 9902-7:2001/A1:2009, EN ISO 9902-7:2001/A2:2014   Textile machinery – Noise test code – Part 7: Dyeing and finishing machinery (ISO 9902-7:2001)   C   13/02/2015   OJ C 54 –  13/02/2015     –       –       –
  2006/42/EC   CEN   EN ISO 10218-1:2008 Robots for industrial environments – Safety requirements – Part 1: Robot  (ISO 10218-1:2006, including Cor    1:2007)   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   01/01/201 3   OJ C 338 – 18/11/2011
  2006/42/EC   CEN   EN ISO 10218-1:2011   Robots and robotic devices – Safety requirements for industrial robots – Part 1: Robots (ISO 10218-1:2011)   C   18/11/2011   OJ C 338 – 18/11/2011     –       –       –
  2006/42/EC   CEN   EN ISO 10218-2:2011 Robots and robotic devices – Safety requirements for industrial robots – Part 2: Robot systems and integration (ISO   10218-2:2011)   C   18/11/2011   OJ C 338 – 18/11/2011     –       –       –
  2006/42/EC   CEN   EN ISO 10472-1:2008   Safety requirements for industrial laundry machinery – Part 1: Common requirements (ISO 10472-1:1997)   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN ISO 10472-2:2008 Safety requirements for industrial laundry machinery – Part 2: Washing  machines and washer-extractors (ISO 10472-2:1997)   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN ISO 10472-3:2008 Safety requirements for industrial laundry machinery – Part 3: Washing tunnel lines including component machines (ISO 10472-3:1997)   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN ISO 10472-4:2008   Safety requirements for industrial laundry machinery – Part 4: Air dryers (ISO 10472-4:1997)   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN ISO 10472-5:2008 Safety requirements for industrial laundry machinery – Part 5: Flatwork ironers, feeders and folders (ISO 10472- 5:1997)   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN ISO 10472-6:2008   Safety requirements for industrial laundry machinery – Part 6: Ironing and fusing presses (ISO 10472-6:1997)   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN ISO 10517:2009   Powered hand-held hedge trimmers – Safety (ISO 10517:2009)   C   29/12/2009   OJ C 309 – 18/12/2009     –       –   30/09/201 4   OJ C 348 – 28/11/2013
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN ISO 10517:2009, EN ISO 10517:2009/A1:2013   Powered hand-held hedge trimmers – Safety (ISO 10517:2009)   C   28/11/2013   OJ C 348 – 28/11/2013     –       –   02/10/202 1   OJ L 102 –  02/04/2020
  2006/42/EC   CEN   EN ISO 10517:2019   Powered hand-held hedge trimmers – Safety (ISO 10517:2019)   C   02/04/2020   OJ L 102 –  02/04/2020     –       –       –
  2006/42/EC   CEN   EN ISO 10821:2005, EN ISO 10821:2005/A1:2009   Industrial sewing machines – Safety requirements for sewing machines, units and systems (ISO 10821:2005)   C   29/12/2009   OJ C 309 – 18/12/2009     –       –       –
  2006/42/EC   CEN   EN ISO 11102-1:2009 Reciprocating internal combustion engines – Handle starting equipment – Part 1: Safety requirements and tests   (ISO 11102-1:1997)   C   29/12/2009   OJ C 309 – 18/12/2009     –       –       –
  2006/42/EC   CEN   EN ISO 11102-2:2009 Reciprocating internal combustion engines – Handle starting equipment – Part 2: Method of testing the angle of disengagement (ISO 11102-2:1997)   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN ISO 11111-1:2009   Textile machinery – Safety requirements – Part 1: Common requirements (ISO 11111-1:2009)   C   29/12/2009   OJ C 309 – 18/12/2009     –       –   30/11/201 7   OJ C 183 – 09/06/2017
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN ISO 11111-1:2016   Textile machinery – Safety requirements – Part 1: Common requirements (ISO 11111-1:2016)   C   09/06/2017   OJ C 183 – 09/06/2017     –       –       –
  2006/42/EC   CEN   EN ISO 11111-2:2005, EN ISO 11111- 2:2005/A1:2009   Textile machinery – Safety requirements – Part 2: Spinning preparatory and spinning machines (ISO 11111-2:2005)   C   29/12/2009   OJ C 309 – 18/12/2009     –       –   09/06/201 7   OJ C 183 – 09/06/2017
  2006/42/EC   CEN EN ISO 11111-2:2005, EN ISO 11111-   2:2005/A1:2009, EN ISO 11111-   2:2005/A2:2016   Textile machinery – Safety requirements – Part 2: Spinning preparatory and spinning machines (ISO 11111-2:2005)   C   09/06/2017   OJ C 183 – 09/06/2017     –       –       –
  2006/42/EC   CEN   EN ISO 11111-3:2005, EN ISO 11111- 3:2005/A1:2009   Textile machinery – Safety requirements – Part 3: Nonwoven machinery (ISO 11111-3:2005)   C   29/12/2009   OJ C 309 – 18/12/2009     –       –   09/06/201 7   OJ C 183 – 09/06/2017
  2006/42/EC   CEN EN ISO 11111-3:2005, EN ISO 11111-   3:2005/A1:2009, EN ISO 11111-   3:2005/A2:2016   Textile machinery – Safety requirements – Part 3: Nonwoven machinery (ISO 11111-3:2005)   C   09/06/2017   OJ C 183 – 09/06/2017     –       –       –
  2006/42/EC   CEN   EN ISO 11111-4:2005, EN ISO 11111- 4:2005/A1:2009 Textile machinery – Safety requirements – Part 4: Yarn processing, cordage and    rope manufacturing machinery (ISO 11111-4:2005)   C   29/12/2009   OJ C 309 – 18/12/2009     –       –   09/06/201 7   OJ C 183 – 09/06/2017
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN EN ISO 11111-4:2005, EN ISO 11111-   4:2005/A1:2009, EN ISO 11111-   4:2005/A2:2016 Textile machinery – Safety requirements – Part 4: Yarn processing, cordage and    rope manufacturing machinery (ISO 11111-4:2005)   C   09/06/2017   OJ C 183 – 09/06/2017     –       –       –
  2006/42/EC   CEN   EN ISO 11111-5:2005, EN ISO 11111- 5:2005/A1:2009 Textile machinery – Safety requirements – Part 5: Preparatory machinery to weaving and knitting (ISO 11111- 5:2005)   C   29/12/2009   OJ C 309 – 18/12/2009     –       –   09/06/201 7   OJ C 183 – 09/06/2017
  2006/42/EC   CEN EN ISO 11111-5:2005, EN ISO 11111-   5:2005/A1:2009, EN ISO 11111-   5:2005/A2:2016 Textile machinery – Safety requirements – Part 5: Preparatory machinery to weaving and knitting (ISO 11111- 5:2005)   C   09/06/2017   OJ C 183 – 09/06/2017     –       –       –
  2006/42/EC   CEN   EN ISO 11111-6:2005, EN ISO 11111- 6:2005/A1:2009   Textile machinery – Safety requirements – Part 6: Fabric manufacturing   machinery (ISO 11111-6:2005)   C   29/12/2009   OJ C 309 – 18/12/2009     –       –   09/06/201 7   OJ C 183 – 09/06/2017
  2006/42/EC   CEN EN ISO 11111-6:2005, EN ISO 11111-   6:2005/A1:2009, EN ISO 11111-   6:2005/A2:2016   Textile machinery – Safety requirements – Part 6: Fabric manufacturing   machinery (ISO 11111-6:2005)   C   09/06/2017   OJ C 183 – 09/06/2017     –       –       –
  2006/42/EC   CEN   EN ISO 11111-7:2005, EN ISO 11111- 7:2005/A1:2009   Textile machinery – Safety requirements – Part 7: Dyeing and finishing    machinery (ISO 11111-7:2005)   C   29/12/2009   OJ C 309 – 18/12/2009     –       –   09/06/201 7   OJ C 183 – 09/06/2017
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN EN ISO 11111-7:2005, EN ISO 11111-   7:2005/A1:2009, EN ISO 11111-   7:2005/A2:2016   Textile machinery – Safety requirements – Part 7: Dyeing and finishing    machinery (ISO 11111-7:2005)   C   09/06/2017   OJ C 183 – 09/06/2017     –       –       –
  2006/42/EC   CEN   EN ISO 11145:2016   Optics and photonics – Lasers and laser- related equipment – Vocabulary and symbols (ISO 11145:2016)   C   09/09/2016   OJ C 332 – 09/09/2016     –       –       –
  2006/42/EC   CEN   EN ISO 11148-1:2011 Hand-held non-electric power tools – Safety requirements – Part 1: Assembly power tools for non-threaded mechanical fasteners (ISO 11148- 1:2011)   C   24/08/2012   OJ C 256 – 24/08/2012     –       –       –
  2006/42/EC   CEN   EN ISO 11148-2:2011 Hand-held non-electric power tools – Safety requirements – Part 2: Cutting-off and crimping power tools (ISO/FDIS 11148-2:2011)   C   29/02/2012   OJ C 61 –  29/02/2012     –       –       –
  2006/42/EC   CEN   EN ISO 11148-3:2010   Hand-held non-electric power tools – Safety requirements – Part 3: Drills and tappers (ISO 11148-3:2010)   C   08/04/2011   OJ C 110 – 08/04/2011     –       –   30/06/201 3   OJ C 99 –  05/04/2013
  2006/42/EC   CEN   EN ISO 11148-3:2012   Hand-held non-electric power tools – Safety requirements – Part 3: Drills and tappers (ISO 11148-3:2012)   C   05/04/2013   OJ C 99 –  05/04/2013     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN ISO 11148-4:2010 Hand-held non-electric power tools – Safety requirements – Part 4: Nonrotary percussive power tools (ISO 11148- 4:2010)   C   08/04/2011   OJ C 110 – 08/04/2011     –       –   30/06/201 3   OJ C 99 –  05/04/2013
  2006/42/EC   CEN   EN ISO 11148-4:2012 Hand-held non-electric power tools – Safety requirements – Part 4: Non-rotary percussive power tools (ISO 11148- 4:2012)   C   05/04/2013   OJ C 99 –  05/04/2013     –       –       –
  2006/42/EC   CEN   EN ISO 11148-5:2011   Hand-held non-electric power tools –  Safety requirements – Part 5: Rotary   percussive drills (ISO 11148-5:2011)   C   29/02/2012   OJ C 61 –  29/02/2012     –       –       –
  2006/42/EC   CEN   EN ISO 11148-6:2010 Hand-held non-electric power tools – Safety requirements – Part 6: Assembly power tools for threaded fasteners (ISO 11148-6:2010)   C   08/04/2011   OJ C 110 – 08/04/2011     –       –   30/06/201 3   OJ C 99 –  05/04/2013
  2006/42/EC   CEN   EN ISO 11148-6:2012 Hand-held non-electric power tools – Safety requirements – Part 6: Assembly power tools for threaded fasteners (ISO 11148-6:2012)   C   05/04/2013   OJ C 99 –  05/04/2013     –       –       –
  2006/42/EC   CEN   EN ISO 11148-7:2012   Hand-held non-electric power tools –   Safety requirements – Part 7: Grinders (ISO 11148-7:2012)   C   15/11/2012   OJ C 350 – 15/11/2012     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN ISO 11148-8:2011   Hand-held non-electric power tools –  Safety requirements – Part 8: Sanders and polishers (ISO 11148-8:2011)   C   29/02/2012   OJ C 61 –  29/02/2012     –       –       –
  2006/42/EC   CEN   EN ISO 11148-9:2011   Hand-held non-electric power tools – Safety requirements – Part 9: Die grinders (ISO 11148-9:2011)   C   29/02/2012   OJ C 61 –  29/02/2012     –       –       –
  2006/42/EC   CEN   EN ISO 11148-10:2011 Hand-held non-electric power tools – Safety requirements – Part 10: Compression power tools (ISO 11148- 10:2011)   C   29/02/2012   OJ C 61 –  29/02/2012     –       –       –
  2006/42/EC   CEN   EN ISO 11148-11:2011   Hand-held non-electric power tools – Safety requirements – Part 11: Nibblers and shears (ISO 11148-11:2011)   C   29/02/2012   OJ C 61 –  29/02/2012     –       –       –
  2006/42/EC   CEN   EN ISO 11148-12:2012 Hand-held non-electric power tools – Safety requirements – Part 12: Circular, oscillating and reciprocating saws (ISO 11148-12:2012)   C   05/04/2013   OJ C 99 –  05/04/2013     –       –       –
  2006/42/EC   CEN   EN ISO 11148-13:2018   Hand-held non-electric power tools – Safety requirements – Part 13: Fastener driving tools (ISO 11148-13:2017)   C   02/04/2020   OJ L 102 –  02/04/2020     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN ISO 11252:2013   Lasers and laser-related equipment – Laser device – Minimum requirements for documentation (ISO 11252:2013)   C   28/11/2013   OJ C 348 – 28/11/2013     –       –       –
  2006/42/EC   CEN   EN ISO 11553-2:2008 Safety of machinery – Laser processing machines – Part 2: Safety requirements  for hand-held laser processing devices  (ISO 11553-2:2007)   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN ISO 11680-1:2008 Machinery for forestry – Safety requirements and testing for pole- mounted powered pruners – Part 1: Units fitted with an integral combustion engine (ISO 11680-1:2000)   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   30/06/201 2   OJ C 61 –  29/02/2012
  2006/42/EC   CEN   EN ISO 11680-1:2011 Machinery for forestry – Safety requirements and testing for pole-  mounted powered pruners – Part 1: Machines fitted with an integral combustion engine (ISO 11680-1:2011)   C   29/02/2012   OJ C 61 –  29/02/2012     –       –   02/02/202 5   OJ L 194 –  02/08/2023
  2006/42/EC   CEN   EN ISO 11680-1:2021 Machinery for forestry – Safety requirements and testing for pole-  mounted powered pruners – Part 1: Machines fitted with an integral combustion engine (ISO 11680-1:2021)   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
  2006/42/EC   CEN   EN ISO 11680-2:2008 Machinery for forestry – Safety requirements and testing for pole- mounted powered pruners – Part 2: Units for use with a back-pack power source (ISO 11680-2:2000)   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   30/06/201 2   OJ C 61 –  29/02/2012
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN ISO 11680-2:2011 Machinery for forestry – Safety requirements and testing for pole-  mounted powered pruners – Part 2: Machines for use with back-pack power source (ISO 11680-2:2011)   C   29/02/2012   OJ C 61 –  29/02/2012     –       –   02/02/202 5   OJ L 194 –  02/08/2023
  2006/42/EC   CEN   EN ISO 11680-2:2021 Machinery for forestry – Safety requirements and testing for pole-  mounted powered pruners – Part 2: Machines for use with backpack power source (ISO 11680-2:2021)   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
  2006/42/EC   CEN   EN ISO 11681-1:2008 Machinery for forestry – Portable chain- saw safety requirements and testing – Part 1: Chain-saws for forest service (ISO 11681-1:2004, including Amd  1:2007)   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   30/06/201 2   OJ C 61 –  29/02/2012
  2006/42/EC   CEN   EN ISO 11681-1:2011 Machinery for forestry – Portable chain- saw safety requirements and testing – Part 1: Chain-saws for forest service (ISO 11681-1:2011)   C   29/02/2012   OJ C 61 –  29/02/2012     –       –   02/02/202 5   OJ L 194 –  02/08/2023
  2006/42/EC   CEN   EN ISO 11681-1:2022 Machinery for forestry – Portable chain- saw safety requirements and testing – Part 1: Chain-saws for forest service (ISO 11681-1:2022)   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
  2006/42/EC   CEN   EN ISO 11681-2:2008 Machinery for forestry – Portable chain- saw safety requirements and testing – Part 2: Chain-saws for tree service (ISO 11681-2:2006)   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   30/06/201 2   OJ C 61 –  29/02/2012
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN ISO 11681-2:2011 Machinery for forestry – Portable chain- saw safety requirements and testing – Part 2: Chain-saws for tree service (ISO 11681-2:2011)   C   29/02/2012   OJ C 61 –  29/02/2012     –       –   30/06/201 8   OJ C 92 –  09/03/2018
  2006/42/EC   CEN   EN ISO 11681-2:2011, EN ISO 11681- 2:2011/A1:2017 Machinery for forestry – Portable chain- saw safety requirements and testing – Part 2: Chain-saws for tree service (ISO 11681-2:2011)   C   09/03/2018   OJ C 92 –  09/03/2018     –       –   02/02/202 5   OJ L 194 –  02/08/2023
  2006/42/EC   CEN   EN ISO 11681-2:2022 Machinery for forestry – Portable chain- saw safety requirements and testing – Part 2: Chain-saws for tree service (ISO 11681-2:2022)   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
  2006/42/EC   CEN   EN ISO 11806:2008 Agricultural and forestry machinery –    Portable hand-held combustion engine   driven brush cutters and grass trimmers – Safety (ISO 11806:1997)   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   30/06/201 2   OJ C 61 –  29/02/2012
  2006/42/EC   CEN   EN ISO 11806-1:2011 Agricultural and forestry machinery – Safety requirements and testing for portable, hand-held, powered brush- cutters and grass-trimmers – Part 1:   Machines fitted with an integral combustion engine (ISO 11806-1:2011)   C   29/02/2012   OJ C 61 –  29/02/2012     –       –   02/02/202 5   OJ L 194 –  02/08/2023
  2006/42/EC   CEN   EN ISO 11806-1:2022 Agricultural and forestry machinery – Safety requirements and testing for portable, hand-held, powered brush- cutters and grass-trimmers – Part 1:   Machines fitted with an integral combustion engine (ISO 11806-1:2022)   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN ISO 11806-2:2011 Agricultural and forestry machinery – Safety requirements and testing for portable, hand-held, powered brush- cutters and grass-trimmers – Part 2: Machines for use with back-pack power unit (ISO 11806-2:2011)   C   29/02/2012   OJ C 61 –  29/02/2012     –       –   02/02/202 5   OJ L 194 –  02/08/2023
  2006/42/EC   CEN   EN ISO 11806-2:2022 Agricultural and forestry machinery – Safety requirements and testing for portable, hand-held, powered brush- cutters and grass-trimmers – Part 2: Machines for use with backpack power unit (ISO 11806-2:2022)   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
  2006/42/EC   CEN   EN ISO 11850:2011   Machinery for forestry – General safety requirements (ISO 11850:2011)   C   29/02/2012   OJ C 61 –  29/02/2012     –       –   09/09/201 6   OJ C 332 – 09/09/2016
  2006/42/EC   CEN   EN ISO 11850:2011, EN ISO 11850:2011/A1:2016   Machinery for forestry – General safety requirements (ISO 11850:2011)   C   09/09/2016   OJ C 332 – 09/09/2016     –       –   02/02/202 5   OJ L 194 –  02/08/2023
        2006/42/EC         CEN       EN ISO 11850:2011, EN ISO 11850:2011/A1:2016, EN ISO 11850:2011/A2:2022         Machinery for forestry – General safety requirements (ISO 11850:2011)         C           – Restriction: With regard to paragraph 4.4 a), first paragraph, first indentation, as well as reference to standard EN ISO 2867:2011, table 6 to paragraphs  8 and 9, maximum dimension for “A” and note a) maximum first step height dimension, this publication does not confer a presumption of conformity to the essential health and safety requirements 1.1.6., 1.5.15. and 1.6.2. of Annex I to Directive 2006/42/EC.         02/08/2023         OJ L 194 –  02/08/2023           –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 12001:2003+A1:2009   Conveying, spraying and placing    machines for concrete and mortar – Safety requirements   C   26/05/2010   OJ C 136 – 26/05/2010     –       –   28/03/201 3   OJ C 350 – 15/11/2012
  2006/42/EC   CEN   EN 12001:2012   Conveying, spraying and placing    machines for concrete and mortar – Safety requirements   C   15/11/2012   OJ C 350 – 15/11/2012     –       –       –
  2006/42/EC   CEN   EN 12012-1:2018 Plastics and rubber machines – Size reduction machines – Part 1: Safety requirements for blade granulators and shredders   C   02/04/2020   OJ L 102 –  02/04/2020     –       –       –
  2006/42/EC   CEN   EN 12012-1:2007+A1:2008   Plastics and rubber machines – Size reduction machines – Part 1: Safety requirements for blade granulators   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   02/10/202 1   OJ L 102 –  02/04/2020
  2006/42/EC   CEN   EN 12012-2:2001+A2:2008   Plastics and rubber machines – Size reduction machines – Part 2: Safety requirements for strand pelletisers   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   20/10/201 0   OJ C 284 – 20/10/2010
  2006/42/EC   CEN   EN 12012-3:2001+A1:2008   Plastics and rubber machines – Size reduction machines – Part 3: Safety requirements for shredders   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   02/10/202 1   OJ L 102 –  02/04/2020
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 12012-4:2006+A1:2008   Plastics and rubber machines – Size reduction machines – Part 4: Safety requirements for agglomerators   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   02/02/202 4   OJ L 194 –  02/08/2023
  2006/42/EC   CEN   EN 12012-4:2019+A1:2021   Plastics and rubber machines – Size reduction machines – Part 4: Safety requirements for agglomerators   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
  2006/42/EC   CEN   EN 12013:2018   Plastics and rubber machines – Internal mixers – Safety requirements   C   19/03/2019   OJ L 75 –   19/03/2019     –       –       –
  2006/42/EC   CEN   EN 12013:2000+A1:2008   Plastics and rubber machines – Internal mixers – Safety requirements   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   19/09/202 0   OJ L 286 –  07/11/2019
  2006/42/EC   CEN   EN 12016:2004+A1:2008   Electromagnetic compatibility – Product family standard for lifts, escalators and   moving walks – Immunity   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   28/02/201 4   OJ C 348 – 28/11/2013
  2006/42/EC   CEN   EN 12016:2013   Electromagnetic compatibility – Product family standard for lifts, escalators and   moving walks – Immunity   C   28/11/2013   OJ C 348 – 28/11/2013     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 12041:2000+A1:2009   Food processing machinery – Moulders – Safety and hygiene requirements   C   29/12/2009   OJ C 309 – 18/12/2009     –       –   29/02/201 6   OJ C 14 –  15/01/2016
  2006/42/EC   CEN   EN 12041:2014   Food processing machinery – Moulders – Safety and hygiene requirements   C   15/01/2016   OJ C 14 –  15/01/2016     –       –       –
  2006/42/EC   CEN   EN 12042:2005+A1:2010   Food processing machinery – Automatic dividers – Safety and hygiene requirements   C   08/04/2011   OJ C 110 – 08/04/2011     –       –   13/02/201 5   OJ C 54 –  13/02/2015
  2006/42/EC   CEN   EN 12042:2014   Food processing machinery – Automatic dough dividers – Safety and hygiene requirements   C   13/02/2015   OJ C 54 –  13/02/2015     –       –       –
  2006/42/EC   CEN   EN 12043:2000+A1:2010   Food processing machinery – Intermediate provers – Safety and hygiene requirements   C   08/04/2011   OJ C 110 – 08/04/2011     –       –   29/02/201 6   OJ C 14 –  15/01/2016
  2006/42/EC   CEN   EN 12043:2014   Food processing machinery – Intermediate provers – Safety and hygiene requirements   C   15/01/2016   OJ C 14 –  15/01/2016     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 12044:2005+A1:2009 Footwear, leather and imitation leather goods manufacturing machines – Cutting and punching machines – Safety requirements   C   29/12/2009   OJ C 309 – 18/12/2009     –       –       –
  2006/42/EC   CEN   EN 12053:2001+A1:2008   Safety of industrial trucks – Test methods for measuring noise emissions   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 12077-2:1998+A1:2008   Cranes safety – Requirements for health and safety – Part 2: Limiting and indicating devices   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 12110:2002+A1:2008   Tunnelling machines – Air locks – Safety requirements   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   13/02/201 5   OJ C 54 –  13/02/2015
  2006/42/EC   CEN   EN 12110:2014   Tunnelling machines – Air locks – Safety requirements   C   13/02/2015   OJ C 54 –  13/02/2015     –       –       –
  2006/42/EC   CEN   EN 12111:2002+A1:2009   Tunnelling machines – Road headers,    continuous miners and impact rippers – Safety requirements   C   29/12/2009   OJ C 309 – 18/12/2009     –       –   13/02/201 5   OJ C 54 –  13/02/2015
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 12111:2014   Tunnelling machines – Road headers and continuous miners – Safety requirements   C   13/02/2015   OJ C 54 –  13/02/2015     –       –       –
  2006/42/EC   CEN   EN 12158-1:2021   Builders’ hoists for goods – Part 1: Hoists with accessible platforms   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
  2006/42/EC   CEN   EN 12158-1:2000+A1:2010   Builders’ hoists for goods – Part 1: Hoists with accessible platforms   C   08/04/2011   OJ C 110 – 08/04/2011     –       –   02/02/202 5   OJ L 194 –  02/08/2023
  2006/42/EC   CEN   EN 12158-2:2000+A1:2010   Builders’ hoists for goods – Part 2: Inclined hoists with non-accessible load carrying devices   C   08/04/2011   OJ C 110 – 08/04/2011     –       –       –
  2006/42/EC   CEN   EN 12159:2000+A1:2009   Builders hoists for persons and materials with vertically guided cages   C   29/12/2009   OJ C 309 – 18/12/2009     –       –   31/05/201 3   OJ C 99 –  05/04/2013
  2006/42/EC   CEN   EN 12159:2012   Builders hoists for persons and materials with vertically guided cages   C   05/04/2013   OJ C 99 –  05/04/2013     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 12162:2001+A1:2009   Liquid pumps – Safety requirements – Procedure for hydrostatic testing   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 12203:2003+A1:2009 Footwear, leather and imitation leather goods manufacturing machines – Shoe  and leather presses – Safety requirements   C   29/12/2009   OJ C 309 – 18/12/2009     –       –       –
  2006/42/EC   CEN   EN 12254:1998+A2:2008   Screens for laser working places – Safety requirements and testing   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   30/09/201 0   OJ C 136 – 26/05/2010
  2006/42/EC   CEN   EN 12267:2003+A1:2010   Food processing machinery – Circular saw machines – Safety and hygiene requirements   C   20/10/2010   OJ C 284 – 20/10/2010     –       –       –
  2006/42/EC   CEN   EN 12268:2003+A1:2010   Food processing machinery – Band saw machines – Safety and hygiene requirements   C   20/10/2010   OJ C 284 – 20/10/2010     –       –   29/02/201 6   OJ C 14 –  15/01/2016
  2006/42/EC   CEN   EN 12268:2014   Food processing machinery – Band saw machines – Safety and hygiene requirements   C   15/01/2016   OJ C 14 –  15/01/2016     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 12301:2019   Plastics and rubber machines –    Calenders – Safety requirements   C   03/03/2021   OJ L 72 –   03/03/2021     –       –   02/08/202 3   OJ L 194 –  02/08/2023
  2006/42/EC   CEN   EN 12301:2019, EN 12301:2019/AC:2021   Plastics and rubber machines –    Calenders – Safety requirements   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
  2006/42/EC   CEN   EN 12301:2000+A1:2008   Plastics and rubber machines –    Calenders – Safety requirements   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   03/09/202 2   OJ L 72 –   03/03/2021
  2006/42/EC   CEN   EN 12312-1:2001+A1:2009   Aircraft ground support equipment – Specific requirements – Part 1: Passenger stairs   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   28/11/201 3   OJ C 348 – 28/11/2013
  2006/42/EC   CEN   EN 12312-1:2013   Aircraft ground support equipment – Specific requirements – Part 1: Passenger stairs   C   28/11/2013   OJ C 348 – 28/11/2013     –       –       –
  2006/42/EC   CEN   EN 12312-2:2002+A1:2009   Aircraft ground support equipment – Specific requirements – Part 2: Catering vehicles   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   13/02/201 5   OJ C 54 –  13/02/2015
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 12312-2:2014   Aircraft ground support equipment – Specific requirements – Part 2: Catering vehicles   C   13/02/2015   OJ C 54 –  13/02/2015     –       –       –
  2006/42/EC   CEN   EN 12312-3:2017   Aircraft ground support equipment – Specific requirements – Part 3: Conveyor belt vehicles   C   09/06/2017   OJ C 183 – 09/06/2017     –       –   15/04/202 3   OJ L 366 –  15/10/2021
  2006/42/EC   CEN   EN 12312-3:2003+A1:2009   Aircraft ground support equipment – Specific requirements – Part 3: Conveyor belt vehicles   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   31/07/201 7   OJ C 183 – 09/06/2017
  2006/42/EC   CEN   EN 12312-3:2017+A1:2020   Aircraft ground support equipment – Specific requirements – Part 3: Conveyor belt vehicles   C   15/10/2021   OJ L 366 –  15/10/2021     –       –       –
  2006/42/EC   CEN   EN 12312-4:2003+A1:2009   Aircraft ground support equipment – Specific requirements – Part 4: Passenger boarding bridges   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   30/09/201 4   OJ C 220 – 11/07/2014
  2006/42/EC   CEN   EN 12312-4:2014   Aircraft ground support equipment – Specific requirements – Part 4: Passenger boarding bridges   C   11/07/2014   OJ C 220 – 11/07/2014     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 12312-5:2021   Aircraft ground support equipment – Specific requirements – Part 5: Aircraft fuelling equipment   C   13/04/2022   OJ L 115 –  13/04/2022     –       –       –
  2006/42/EC   CEN   EN 12312-5:2005+A1:2009   Aircraft ground support equipment – Specific requirements – Part 5: Aircraft fuelling equipment   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   11/10/202 3   OJ L 115 –  13/04/2022
  2006/42/EC   CEN   EN 12312-6:2017   Aircraft ground support equipment – Specific requirements – Part 6: Deicers and de-icing/anti-icing equipment   C   09/06/2017   OJ C 183 – 09/06/2017     –       –       –
  2006/42/EC   CEN   EN 12312-6:2004+A1:2009   Aircraft ground support equipment – Specific requirements – Part 6: Deicers and deicing/antiicing equipment   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   30/09/201 7   OJ C 183 – 09/06/2017
  2006/42/EC   CEN   EN 12312-7:2020   Aircraft ground support equipment – Specific requirements – Part 7: Aircraft movement equipment   C   15/10/2021   OJ L 366 –  15/10/2021     –       –       –
  2006/42/EC   CEN   EN 12312-7:2005+A1:2009   Aircraft ground support equipment – Specific requirements – Part 7: Air-craft movement equipment   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   15/04/202 3   OJ L 366 –  15/10/2021
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 12312-8:2018 Aircraft ground support equipment – Specific requirements – Part 8: Maintenance or service stairs and platforms   C   02/04/2020   OJ L 102 –  02/04/2020     –       –       –
  2006/42/EC   CEN   EN 12312-8:2005+A1:2009   Aircraft ground support equipment – Specific requirements – Part 8: Maintenance stairs and platforms   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   02/10/202 1   OJ L 102 –  02/04/2020
      2006/42/EC       CEN       EN 12312-9:2005+A1:2009     Aircraft ground support equipment – Specific requirements – Part 9: Container/Pallet loaders     C         – Warning: This publication does not concern clause 5.6 of the standard, the application of which does not confer a presumption of conformity with the essential health and safety requirement 1.5.15 of Annex I to Directive 2006/42/EC, in conjunction with the requirement 1.1.2(b) of that Annex.       08/09/2009     OJ C 214 – 08/09/2009     28/11/201 3     OJ C 348 – 28/11/2013
  2006/42/EC   CEN   EN 12312-9:2013   Aircraft ground support equipment – Specific requirements – Part 9: Container/Pallet loaders   C   28/11/2013   OJ C 348 – 28/11/2013     –       –       –
  2006/42/EC   CEN   EN 12312-10:2005+A1:2009   Aircraft ground support equipment – Specific requirements – Part 10: Container/Pallet transfer transporters   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 12312-12:2017   Aircraft ground support equipment – Specific requirements – Part 12: Potable water service equipment   C   09/03/2018   OJ C 92 –  09/03/2018     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 12312-12:2002+A1:2009   Aircraft ground support equipment – Specific requirements – Part 12: Potable water service equipment   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   30/06/201 8   OJ C 92 –  09/03/2018
  2006/42/EC   CEN   EN 12312-13:2017   Aircraft ground support equipment – Specific requirements – Part 13: Lavatory service equipment   C   09/03/2018   OJ C 92 –  09/03/2018     –       –       –
  2006/42/EC   CEN   EN 12312-13:2002+A1:2009   Aircraft ground support equipment – Specific requirements – Part 13: Lavatory service equipment   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   30/06/201 8   OJ C 92 –  09/03/2018
  2006/42/EC   CEN   EN 12312-14:2006+A1:2009 Aircraft ground support equipment – Specific requirements – Part 14: Disabled/incapacitated passenger boarding vehicles   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   13/02/201 5   OJ C 54 –  13/02/2015
  2006/42/EC   CEN   EN 12312-14:2014 Aircraft ground support equipment – Specific requirements – Part 14: Disabled/incapacitated passenger boarding vehicles   C   13/02/2015   OJ C 54 –  13/02/2015     –       –       –
  2006/42/EC   CEN   EN 12312-15:2006+A1:2009   Aircraft ground support equipment – Specific requirements – Part 15: Baggage and equipment tractors   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 12312-16:2005+A1:2009   Aircraft ground support equipment – Specific requirements – Part 16: Air start equipment   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 12312-17:2004+A1:2009   Aircraft ground support equipment – Specific requirements – Part 17: Air  conditioning equipment   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 12312-18:2005+A1:2009   Aircraft ground support equipment – Specific requirements – Part 18: Nitrogen or Oxygen units   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 12312-19:2005+A1:2009 Aircraft ground support equipment – Specific requirements – Part 19: Aircraft jacks, axle jacks and hydraulic tail stanchions   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 12312-20:2005+A1:2009   Aircraft ground support equipment – Specific requirements – Part 20: Electrical ground power units   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 12321:2003+A1:2009   Underground mining machinery – Specification for the safety requirements of armoured face conveyors   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 12331:2003+A2:2010   Food processing machinery – Mincing machines – Safety and hygiene requirements   C   20/10/2010   OJ C 284 – 20/10/2010     –       –   02/02/202 4   OJ L 194 –  02/08/2023
  2006/42/EC   CEN   EN 12331:2021   Food processing machinery – Mincing machines – Safety and hygiene requirements   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
  2006/42/EC   CEN   EN 12336:2005+A1:2008 Tunnelling machines – Shield machines, thrust boring machines, auger boring machines, lining erection equipment – Safety requirements   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   13/02/201 5   OJ C 54 –  13/02/2015
  2006/42/EC   CEN   EN 12348:2000+A1:2009   Core drilling machines on stand – Safety   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 12355:2022 Food processing machinery – Derinding- , skinning- and membrane removal machines – Safety and hygiene requirements   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
  2006/42/EC   CEN   EN 12355:2003+A1:2010 Food processing machinery – Derinding- , skinning- and membrane removal machines – Safety and hygiene requirements   C   20/10/2010   OJ C 284 – 20/10/2010     –       –   02/02/202 5   OJ L 194 –  02/08/2023
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 12385-1:2002+A1:2008   Steel wire ropes – Safety – Part 1: General requirements   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 12385-2:2002+A1:2008   Steel wire ropes – Safety – Part 2: Definitions, designation and classification   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 12385-3:2004+A1:2008   Steel wire ropes – Safety – Part 3: Information for use and maintenance   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 12385-4:2002+A1:2008   Steel wire ropes – Safety – Part 4: Stranded ropes for general lifting applications   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 12385-5:2021   Steel wire ropes – Safety – Part 5: Stranded ropes for lifts   C   13/04/2022   OJ L 115 –  13/04/2022     –       –   02/08/202 3   OJ L 194 –  02/08/2023
  2006/42/EC   CEN   EN 12385-5:2021, EN 12385-5:2021/AC:2021   Steel wire ropes – Safety – Part 5: Stranded ropes for lifts   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 12385-10:2003+A1:2008   Steel wire ropes – Safety – Part 10: Spiral ropes for general structural   applications   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 12387:2005+A1:2009 Footwear, leather and imitation leather goods manufacturing machines – Modular shoe repair equipment – Safety requirements   C   29/12/2009   OJ C 309 – 18/12/2009     –       –       –
  2006/42/EC   CEN   EN 12409:2008   Plastics and rubber machines – Thermoforming machines – Safety requirements   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   30/04/201 2   OJ C 61 –  29/02/2012
  2006/42/EC   CEN   EN 12409:2008+A1:2011   Plastics and rubber machines – Thermoforming machines – Safety requirements   C   29/02/2012   OJ C 61 –  29/02/2012     –       –       –
  2006/42/EC   CEN EN 12417:2001+A2:2009, EN 12417:2001+A2:2009/AC:201 0   Machine tools – Safety – Machining centres   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 12418:2021   Masonry and stone cutting-off machines for job site – Safety   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 12418:2000+A1:2009   Masonry and stone cutting-off machines for job site – Safety   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   02/02/202 5   OJ L 194 –  02/08/2023
  2006/42/EC   CEN   EN 12453:2017+A1:2021 Industrial, commercial and garage doors and gates – Safety in use of power operated doors – Requirements and test methods   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
  2006/42/EC   CEN   EN 12463:2004+A1:2011   Food processing machinery – Filling machines and auxiliary machines –    Safety and hygiene requirements   C   20/07/2011   OJ C 214 – 20/07/2011     –       –       –
  2006/42/EC   CEN   EN 12505:2000+A1:2009 Food processing machinery – Centrifugal machines for processing edible oils and fats – Safety and hygiene requirements   C   29/12/2009   OJ C 309 – 18/12/2009     –       –       –
            2006/42/EC             CEN             EN 12525:2000+A2:2010           Agricultural machinery – Front loaders – Safety           C             26/05/2010           OJ C 136 – 26/05/2010 Restriction: This harmonised standard does not confer a presumption of conformity with the essential health and safety requirements set out in point 1.1.2. of Annex I to Directive 2006/42/EC, which requires technical measures, and not organisational ones such as protective structures specifically  mitigating falling objects instead of addressing other accident scenarios including vehicle roll-  over events, and point 1.7.4.2 (l) of Annex I to Directive 2006/42/EC, which requires information about the residual risks that remain despite the             30/04/2024           OJ L, 2024/1256 – 30/04/2024               –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
              inherent safe design measures, safeguarding and complementary protective measures adopted.        
  2006/42/EC   CEN   EN 12545:2000+A1:2009   Footwear, leather and imitation leather  goods manufacturing machines – Noise test code – Common requirements   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 12547:1999+A1:2009   Centrifuges – Common safety requirements   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   29/02/201 6   OJ C 14 –  15/01/2016
  2006/42/EC   CEN   EN 12547:2014   Centrifuges – Common safety requirements   C   15/01/2016   OJ C 14 –  15/01/2016     –       –       –
  2006/42/EC   CEN   EN 12549:1999+A1:2008   Acoustics – Noise test code for fastener driving tools – Engineering method   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 12581:2005+A1:2010 Coating plants – Machinery for dip coating and electrodeposition of organic liquid coating material – Safety requirements   C   20/10/2010   OJ C 284 – 20/10/2010     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 12601:2010   Reciprocating internal combustion engine driven generating sets – Safety   C   08/04/2011   OJ C 110 – 08/04/2011     –       –   30/06/201 7   OJ C 332 – 09/09/2016
  2006/42/EC   CEN   EN 12609:2021   Truck mixers – Safety requirements   C   13/04/2022   OJ L 115 –  13/04/2022     –       –       –
  2006/42/EC   CEN   EN 12621:2006+A1:2010   Machinery for the supply and circulation of coating materials under pressure – Safety requirements   C   20/10/2010   OJ C 284 – 20/10/2010     –       –       –
  2006/42/EC   CEN   EN 12622:2009   Safety of machine tools – Hydraulic press brakes   C   26/05/2010   OJ C 136 – 26/05/2010     –       –   30/04/201 4   OJ C 110 – 11/04/2014
  2006/42/EC   CEN   EN 12622:2009+A1:2013   Safety of machine tools – Hydraulic press brakes   C   11/04/2014   OJ C 110 – 11/04/2014     –       –       –
  2006/42/EC   CEN   EN 12629-1:2000+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate – Safety – Part 1:  Common requirements   C   08/04/2011   OJ C 110 – 08/04/2011     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 12629-2:2002+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate – Safety – Part 2:  Block making machines   C   08/04/2011   OJ C 110 – 08/04/2011     –       –       –
  2006/42/EC   CEN   EN 12629-3:2002+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate – Safety – Part 3:  Slide and turntable machines   C   08/04/2011   OJ C 110 – 08/04/2011     –       –       –
  2006/42/EC   CEN   EN 12629-4:2001+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate – Safety – Part 4:Concrete roof tile making machines   C   08/04/2011   OJ C 110 – 08/04/2011     –       –       –
  2006/42/EC   CEN   EN 12629-5-1:2003+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate – Safety – Part 5-1:   Pipe making machines manufacturing in the vertical axis   C   08/04/2011   OJ C 110 – 08/04/2011     –       –       –
  2006/42/EC   CEN   EN 12629-5-2:2003+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate – Safety – Part 5-2:   Pipe making machines manufacturing in the horizontal axis   C   08/04/2011   OJ C 110 – 08/04/2011     –       –       –
  2006/42/EC   CEN   EN 12629-5-3:2003+A1:2010 Machines for the manufacture of constructional products from concrete   and calcium-silicate – Safety – Part 5-3: Pipe prestressing machines   C   08/04/2011   OJ C 110 – 08/04/2011     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 12629-5-4:2003+A1:2010 Machines for the manufacture of constructional products from concrete   and calcium-silicate – Safety – Part 5-4: Concrete pipe coating machines   C   08/04/2011   OJ C 110 – 08/04/2011     –       –       –
  2006/42/EC   CEN   EN 12629-6:2004+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate – Safety – Part 6: Stationary and mobile equipment for the manufacture of precast reinforced products   C   08/04/2011   OJ C 110 – 08/04/2011     –       –       –
  2006/42/EC   CEN   EN 12629-7:2004+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate – Safety – Part 7:  Stationary and mobile equipment for   long line manufacture of prestressed    products   C   08/04/2011   OJ C 110 – 08/04/2011     –       –       –
  2006/42/EC   CEN   EN 12629-8:2002+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate – Safety – Part 8:  Machines and equipment for the manufacture of constructional products from calcium-silicate (and concrete)   C   08/04/2011   OJ C 110 – 08/04/2011     –       –       –
      2006/42/EC       CEN       EN 12635:2002+A1:2008       Industrial, commercial and garage doors and gates – Installation and use       C       29/12/2009       OJ C 214 – 08/09/2009 Warning: With regard to paragraph 5.1 and Annex D, this publication does not concern the reference to EN 12453:2000, the application of which does not confer a presumption of conformity to the essential health and safety requirements 1.1.2, 1.1.6, 1.2.1, 1.3.7, 1.3.8.2, 1.4.1, 1.4.3 and 1.5.14 of Annex I to Directive 2006/42/EC.       15/01/2016       OJ C 14 –  15/01/2016         –
  2006/42/EC   CEN   EN 12643:1997+A1:2008   Earth-moving machinery – Rubber-tyred machines – Steering requirements (ISO   5010:1992 modified)   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   31/08/201 4   OJ C 220 – 11/07/2014
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 12643:2014   Earth-moving machinery – Rubber-tyred machines – Steering requirements (ISO   5010:1992 modified)   C   11/07/2014   OJ C 220 – 11/07/2014     –       –   03/09/202 2   OJ L 72 –   03/03/2021
  2006/42/EC   CEN   EN 12644-1:2001+A1:2008   Cranes – Information for use and testing – Part 1: Instructions   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 12644-2:2000+A1:2008   Cranes – Information for use and testing – Part 2: Marking   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 12649:2008   Concrete compactors and smoothing machines – Safety   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   31/01/201 2   OJ C 338 – 18/11/2011
  2006/42/EC   CEN   EN 12649:2008+A1:2011   Concrete compactors and smoothing machines – Safety   C   18/11/2011   OJ C 338 – 18/11/2011     –       –       –
  2006/42/EC   CEN   EN 12653:1999+A2:2009   Footwear, leather and imitation leather manufacturing machines – Nailing machines – Safety requirements   C   29/12/2009   OJ C 309 – 18/12/2009     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 12693:2008 Refrigerating systems and heat pumps –   Safety and environmental requirements – Positive displacement refrigerant compressors   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 12717:2001+A1:2009   Safety of machine tools – Drilling machines   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 12733:2018   Agricultural and forestry machinery – Pedestrian controlled motor mowers – Safety   C   02/04/2020   OJ L 102 –  02/04/2020     –       –       –
  2006/42/EC   CEN   EN 12733:2001+A1:2009   Agricultural and forestry machinery – Pedestrian controlled motor mowers – Safety   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   02/10/202 1   OJ L 102 –  02/04/2020
  2006/42/EC   CEN   EN 12750:2001+A1:2009   Safety of woodworking machines – Four-sided moulding machines   C   29/12/2009   OJ C 309 – 18/12/2009     –       –   28/11/201 3   OJ C 348 – 28/11/2013
  2006/42/EC   CEN   EN 12750:2013   Safety of woodworking machines – Four sided moulding machines   C   28/11/2013   OJ C 348 – 28/11/2013     –       –   02/02/202 5   OJ L 194 –  02/08/2023
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 12753:2005+A1:2010   Thermal cleaning systems for exhaust   gas from surface treatment equipment – Safety requirements   C   20/10/2010   OJ C 284 – 20/10/2010     –       –       –
  2006/42/EC   CEN   EN 12757-1:2005+A1:2010   Mixing machinery for coating materials – Safety requirements – Part 1: Mixing    machinery for use in vehicle refinishing   C   20/10/2010   OJ C 284 – 20/10/2010     –       –       –
  2006/42/EC   CEN   EN 12779:2015   Safety of woodworking machines – Chip and dust extraction systems with fixed installation – Safety requirements   C   13/05/2016   OJ C 173 – 13/05/2016     –       –       –
  2006/42/EC   CEN   EN 12779:2004+A1:2009 Safety of woodworking machines – Chip and dust extraction systems with fixed installation – Safety related performances and safety requirements   C   29/12/2009   OJ C 309 – 18/12/2009     –       –   31/05/201 6   OJ C 173 – 13/05/2016
  2006/42/EC   CEN   EN 12851:2005+A1:2010 Food processing machinery – Catering attachments for machines having an auxiliary drive hub – Safety and hygiene requirements   C   26/05/2010   OJ C 136 – 26/05/2010     –       –   15/01/201 6   OJ C 14 –  15/01/2016
  2006/42/EC   CEN   EN 12852:2001+A1:2010   Food processing machinery – Food    processors and blenders – Safety and hygiene requirements   C   20/10/2010   OJ C 284 – 20/10/2010     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN EN 12853:2001+A1:2010, EN 12853:2001+A1:2010/AC:201 0   Food processing machinery – Hand-held blenders and whisks – Safety and hygiene requirements   C   20/10/2010   OJ C 284 – 20/10/2010     –       –       –
  2006/42/EC   CEN   EN 12854:2003+A1:2010   Food processing machinery – Beam mixers – Safety and hygiene requirements   C   26/05/2010   OJ C 136 – 26/05/2010     –       –       –
  2006/42/EC   CEN   EN 12855:2003+A1:2010   Food processing machinery – Rotating bowl cutters – Safety and hygiene requirements   C   20/10/2010   OJ C 284 – 20/10/2010     –       –       –
  2006/42/EC   CEN   EN 12881-1:2005+A1:2008   Conveyor belts – Fire simulation flammability testing – Part 1: Propane burner tests   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   13/02/201 5   OJ C 54 –  13/02/2015
  2006/42/EC   CEN   EN 12881-1:2014   Conveyor belts – Fire simulation flammability testing – Part 1: Propane burner tests   C   13/02/2015   OJ C 54 –  13/02/2015     –       –       –
  2006/42/EC   CEN   EN 12881-2:2005+A1:2008   Conveyor belts – Fire simulation flammability testing – Part 2: Large scale fire test   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 12882:2008   Conveyor belts for general purpose use – Electrical and flammability safety requirements   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   29/02/201 6   OJ C 14 –  15/01/2016
  2006/42/EC   CEN   EN 12882:2015   Conveyor belts for general purpose use – Electrical and flammability safety requirements   C   15/01/2016   OJ C 14 –  15/01/2016     –       –       –
  2006/42/EC   CEN   EN 12921-1:2005+A1:2010 Machines for surface cleaning and pre- treatment of industrial items using liquids or vapours – Part 1: Common safety requirements   C   20/10/2010   OJ C 284 – 20/10/2010     –       –       –
  2006/42/EC   CEN   EN 12921-2:2005+A1:2008 Machines for surface cleaning and pre- treatment of industrial items using liquids or vapours – Part 2: Safety of  machines using water based cleaning liquids   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 12921-3:2005+A1:2008 Machines for surface cleaning and pre- treatment of industrial items using liquids or vapours – Part 3: Safety of machines using flammable cleaning  liquids   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 12921-4:2005+A1:2008 Machines for surface cleaning and pretreatment of industrial items using  liquids and vapours – Part 4: Safety of machines using halogenated solvents   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 12957:2001+A1:2009   Machine tools – Safety – Electro discharge machines   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   28/02/201 4   OJ C 348 – 28/11/2013
  2006/42/EC   CEN   EN 12965:2019   Tractors and machinery for agriculture and forestry – Power take-off (PTO) drive shafts and their guards – Safety   C   03/03/2021   OJ L 72 –   03/03/2021     –       –       –
  2006/42/EC   CEN   EN 12965:2003+A2:2009   Tractors and machinery for agriculture and forestry – Power take-off (PTO) drive shafts and their guards – Safety   C   29/12/2009   OJ C 309 – 18/12/2009     –       –   03/09/202 2   OJ L 72 –   03/03/2021
  2006/42/EC   CEN   EN 12978:2003+A1:2009 Industrial, commercial and garage doors and gates – Safety devices for power operated doors and gates – Requirements and test methods   C   29/12/2009   OJ C 309 – 18/12/2009     –       –       –
  2006/42/EC   CEN   EN 12981:2005+A1:2009   Coating plants – Spray booths for application of organic powder coating material – Safety requirements   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   02/10/202 1   OJ L 102 –  02/04/2020
  2006/42/EC   CEN   EN 12984:2005+A1:2010 Food processing machinery – Portable and/or hand-guided machines and appliances with mechanically driven cutting tools – Safety and hygiene requirements   C   20/10/2010   OJ C 284 – 20/10/2010     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 12999:2011   Cranes – Loader cranes   C   08/04/2011   OJ C 110 – 08/04/2011     –       –   31/12/201 2   OJ C 256 – 24/08/2012
  2006/42/EC   CEN   EN 12999:2020   Cranes – Loader cranes   C   15/10/2021   OJ L 366 –  15/10/2021     –       –       –
  2006/42/EC   CEN   EN 12999:2011+A1:2012   Cranes – Loader cranes   C   24/08/2012   OJ C 256 – 24/08/2012     –       –   19/09/202 0   OJ L 286 –  07/11/2019
  2006/42/EC   CEN   EN 12999:2011+A2:2018   Cranes – Loader cranes   C   19/03/2019   OJ L 75 –   19/03/2019     –       –   15/04/202 3   OJ L 366 –  15/10/2021
  2006/42/EC   CEN   EN 13000:2010, EN 13000:2010/AC:2010   Cranes – Mobile cranes   C   26/05/2010   OJ C 136 – 26/05/2010     –       –   13/02/201 5   OJ C 54 –  13/02/2015
  2006/42/EC   CEN   EN 13000:2010+A1:2014   Cranes – Mobile cranes   C   13/02/2015   OJ C 54 –  13/02/2015     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 13001-1:2004+A1:2009, EN 13001- 1:2004+A1:2009/AC:2009   Cranes – General design – Part 1: General principles and requirements   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   29/02/201 6   OJ C 14 –  15/01/2016
  2006/42/EC   CEN   EN 13001-1:2015   Cranes – General design – Part 1: General principles and requirements   C   15/01/2016   OJ C 14 –  15/01/2016     –       –       –
  2006/42/EC   CEN   EN 13001-2:2004+A3:2009   Crane safety – General design – Part 2: Load effects   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   18/11/201 1   OJ C 338 – 18/11/2011
  2006/42/EC   CEN   EN 13001-2:2011, EN 13001-2:2011/AC:2012   Crane safety – General design – Part 2: Load actions   C   18/11/2011   OJ C 338 – 18/11/2011     –       –   29/02/201 6   OJ C 14 –  15/01/2016
  2006/42/EC   CEN   EN 13001-2:2014   Crane safety – General design – Part 2: Load actions   C   15/01/2016   OJ C 14 –  15/01/2016     –       –   11/10/202 3   OJ L 115 –  13/04/2022
  2006/42/EC   CEN   EN 13001-2:2021   Crane safety – General design – Part 2: Load actions   C   13/04/2022   OJ L 115 –  13/04/2022     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 13001-3-1:2012   Cranes – General Design – Part 3-1: Limit States and proof competence of steel structure   C   05/06/2012   OJ C 159 – 05/06/2012     –       –   31/01/201 4   OJ C 348 – 28/11/2013
  2006/42/EC   CEN   EN 13001-3-1:2012+A1:2013   Cranes – General Design – Part 3-1: Limit States and proof competence of steel structure   C   28/11/2013   OJ C 348 – 28/11/2013     –       –   19/09/202 0   OJ L 286 –  07/11/2019
  2006/42/EC   CEN   EN 13001-3-1:2012+A2:2018   Cranes – General Design – Part 3-1: Limit States and proof competence of steel structure   C   19/03/2019   OJ L 75 –   19/03/2019     –       –       –
  2006/42/EC   CEN   EN 13001-3-2:2014   Cranes – General design – Part 3-2: Limit states and proof of competence of wire ropes in reeving systems   C   15/01/2016   OJ C 14 –  15/01/2016     –       –       –
  2006/42/EC   CEN   EN 13001-3-3:2014   Cranes – General design – Part 3-3: Limit states and proof of competence of wheel/rail contacts   C   15/01/2016   OJ C 14 –  15/01/2016     –       –       –
  2006/42/EC   CEN   EN 13001-3-5:2016   Cranes – General design – Part 3-5: Limit states and proof of competence of forged hooks   C   09/06/2017   OJ C 183 – 09/06/2017     –       –   02/02/202 5   OJ L 194 –  02/08/2023
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 13001-3-5:2016+A1:2021   Cranes – General design – Part 3-5: Limit states and proof of competence of forged and cast hooks   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
  2006/42/EC   CEN   EN 13001-3-6:2018   Cranes – General design – Part 3-6: Limit states and proof of competence of machinery – Hydraulic cylinders   C   19/03/2019   OJ L 75 –   19/03/2019     –       –   11/10/202 3   OJ L 115 –  13/04/2022
  2006/42/EC   CEN   EN 13001-3-6:2018+A1:2021   Cranes – General design – Part 3-6: Limit states and proof of competence of machinery – Hydraulic cylinders   C   13/04/2022   OJ L 115 –  13/04/2022     –       –       –
  2006/42/EC   CEN   EN 13015:2001+A1:2008   Maintenance for lifts and escalators – Rules for maintenance instructions   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 13019:2001+A1:2008   Machines for road surface cleaning – Safety requirements   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   02/02/202 5   OJ L 194 –  02/08/2023
  2006/42/EC   CEN   EN 13020:2015   Road surface treatment machines – Safety requirements   C   13/05/2016   OJ C 173 – 13/05/2016     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 13020:2004+A1:2010   Road surface treatment machines – Safety requirements   C   20/10/2010   OJ C 284 – 20/10/2010     –       –   31/05/201 6   OJ C 173 – 13/05/2016
  2006/42/EC   CEN   EN 13021:2003+A1:2008   Winter service machines – Safety requirements   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   02/02/202 5   OJ L 194 –  02/08/2023
  2006/42/EC   CEN   EN 13023:2003+A1:2010 Noise measurement methods for printing, paper converting, paper making machines and auxiliary equipment – Accuracy grades 2 and 3   C   26/05/2010   OJ C 136 – 26/05/2010     –       –       –
  2006/42/EC   CEN   EN 13035-1:2008 Machines and plants for the manufacture, treatment and processing   of flat glass – Safety requirements – Part 1: Storage, handling and transportation   equipment inside the factory   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 13035-2:2008 Machines and plants for the manufacture, treatment and processing   of flat glass – Safety requirements – Part 2: Storage, handling and transportation   equipment outside the factory   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 13035-3:2003+A1:2009, EN 13035- 3:2003+A1:2009/AC:2010 Machines and plants for the manufacture, treatment and processing   of flat glass – Safety requirements – Part 3: Cutting machines   C   29/12/2009   OJ C 309 – 18/12/2009     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 13035-4:2003+A1:2009 Machines and plants for the manufacture, treatment and processing   of flat glass – Safety requirements – Part 4: Tilting tables   C   26/05/2010   OJ C 136 – 26/05/2010     –       –       –
  2006/42/EC   CEN   EN 13035-5:2006+A1:2009 Machines and plants for the manufacture, treatment and processing   of flat glass – Safety requirements – Part 5: Machines and installations for stacking and de-stacking   C   26/05/2010   OJ C 136 – 26/05/2010     –       –       –
  2006/42/EC   CEN   EN 13035-6:2006+A1:2009 Machines and plants for the manufacture, treatment and processing   of flat glass – Safety requirements – Part 6: Machines for break-out   C   26/05/2010   OJ C 136 – 26/05/2010     –       –       –
  2006/42/EC   CEN   EN 13035-7:2006+A1:2009 Machines and plants for the manufacture, treatment and processing   of flat glass – Safety requirements – Part 7: Cutting machines for laminated glass   C   26/05/2010   OJ C 136 – 26/05/2010     –       –       –
  2006/42/EC   CEN   EN 13035-9:2006+A1:2010 Machines and plants for the manufacture, treatment and processing   of flat glass – Safety requirements – Part 9: Washing installations   C   26/05/2010   OJ C 136 – 26/05/2010     –       –       –
  2006/42/EC   CEN   EN 13035-11:2006+A1:2010 Machines and plants for the manufacture, treatment and processing   of flat glass – Safety requirements – Part 11: Drilling machines   C   26/05/2010   OJ C 136 – 26/05/2010     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 13042-1:2007+A1:2009 Machines and plants for the manufacture, treatment and processing of hollow glass – Safety requirements – Part 1: Gob feeder   C   29/12/2009   OJ C 309 – 18/12/2009     –       –       –
  2006/42/EC   CEN   EN 13042-2:2004+A1:2009 Machines and plants for the manufacture, treatment and processing of hollow glass – Safety requirements – Part 2: Handling machines for feeding   C   29/12/2009   OJ C 309 – 18/12/2009     –       –       –
  2006/42/EC   CEN   EN 13042-3:2007+A1:2009 Machines and plants for the manufacture, treatment and processing of hollow glass – Safety requirements – Part 3: IS machines   C   29/12/2009   OJ C 309 – 18/12/2009     –       –       –
  2006/42/EC   CEN   EN 13042-5:2003+A1:2009 Machines and plants for the manufacture, treatment and processing of hollow glass – Safety requirements – Part 5: Presses   C   29/12/2009   OJ C 309 – 18/12/2009     –       –       –
  2006/42/EC   CEN   EN 13059:2002+A1:2008   Safety of industrial trucks – Test  methods for measuring vibration   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 13102:2005+A1:2008   Ceramic machines – Safety – Loading and unloading of fine clay tiles   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 13112:2002+A1:2009   Tannery machines – Splitting and bandknife shearing machines – Safety requirements   C   26/05/2010   OJ C 136 – 26/05/2010     –       –       –
  2006/42/EC   CEN   EN 13113:2002+A1:2010   Tannery machines – Roller coating machines – Safety requirements   C   08/04/2011   OJ C 110 – 08/04/2011     –       –       –
  2006/42/EC   CEN   EN 13114:2002+A1:2009   Tannery machines – Rotating process vessels – Safety requirements   C   26/05/2010   OJ C 136 – 26/05/2010     –       –       –
  2006/42/EC   CEN   EN 13118:2000+A1:2009   Agricultural machinery – Potato harvesting equipment – Safety   C   29/12/2009   OJ C 309 – 18/12/2009     –       –   02/02/202 5   OJ L 194 –  02/08/2023
  2006/42/EC   CEN   EN 13120:2009   Internal blinds – Performance  requirements including safety   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   31/08/201 4   OJ C 220 – 11/07/2014
  2006/42/EC   CEN EN 13120:2009+A1:2014, EN 13120:2009+A1:2014/AC:201 5   Internal blinds – Performance  requirements including safety   C   11/07/2014   OJ C 220 – 11/07/2014     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN EN 13128:2001+A2:2009, EN 13128:2001+A2:2009/AC:201 0   Safety of machine tools – Milling machines (including boring machines)   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 13135:2013   Cranes – Safety – Design – Requirements for equipment   C   28/11/2013   OJ C 348 – 28/11/2013     –       –   19/09/202 0   OJ L 286 –  07/11/2019
  2006/42/EC   CEN   EN 13135:2013+A1:2018   Cranes – Safety – Design – Requirements for equipment   C   19/03/2019   OJ L 75 –   19/03/2019     –       –       –
  2006/42/EC   CEN   EN 13135-1:2003+A1:2010   Cranes – Equipment – Part 1: Electrotechnical equipment   C   20/10/2010   OJ C 284 – 20/10/2010     –       –   28/11/201 3   OJ C 348 – 28/11/2013
  2006/42/EC   CEN   EN 13135-2:2004+A1:2010   Cranes – Equipment – Part 2: Non- electrotechnical equipment   C   08/04/2011   OJ C 110 – 08/04/2011     –       –   28/11/201 3   OJ C 348 – 28/11/2013
  2006/42/EC   CEN   EN 13140:2000+A1:2009   Agricultural machinery – Sugar beet and fodder beet harvesting equipment – Safety   C   29/12/2009   OJ C 309 – 18/12/2009     –       –   02/02/202 5   OJ L 194 –  02/08/2023
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 13155:2003+A2:2009   Cranes – Safety – Non-fixed load lifting attachments   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 13157:2004+A1:2009   Cranes – Safety – Hand powered cranes   C   29/12/2009   OJ C 309 – 18/12/2009     –       –       –
  2006/42/EC   CEN   EN 13204:2016   Double acting hydraulic rescue tools for fire and rescue service use – Safety and   performance requirements   C   09/06/2017   OJ C 183 – 09/06/2017     –       –       –
  2006/42/EC   CEN   EN 13204:2004+A1:2012   Double acting hydraulic rescue tools for fire and rescue service use – Safety and   performance requirements   C   24/08/2012   OJ C 256 – 24/08/2012     –       –   30/11/201 7   OJ C 183 – 09/06/2017
  2006/42/EC   CEN   EN 13208:2003+A1:2010   Food processing machinery – Vegetable peelers – Safety and hygiene requirements   C   20/10/2010   OJ C 284 – 20/10/2010     –       –       –
  2006/42/EC   CEN   EN 13218:2002+A1:2008   Machine tools – Safety – Stationary grinding machines   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   30/06/201 7   OJ C 173 – 13/05/2016
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
      2006/42/EC       CEN       EN 13241-1:2003+A1:2011     Industrial, commercial and garage doors and gates – Product standard – Part 1: Products without fire resistance or smoke control characteristics       C       18/11/2011       OJ C 338 – 18/11/2011 Warning: With regard to paragraphs 4.2.2, 4.2.6, 4.3.2, 4.3.3, 4.3.4, 4.3.6, this publication does not concern the reference to EN 12453:2000, the application of which does not confer a presumption of conformity to the essential health and safety requirements 1.3.7 and 1.4.3 of Annex I to Directive 2006/42/EC.       15/01/2016       OJ C 14 –  15/01/2016       30/06/201 8       OJ C 183 – 09/06/2017
      2006/42/EC       CEN       EN 13241:2003+A2:2016     Industrial, commercial, garage doors and gates – Product standard, performance characteristics       C       09/06/2017       OJ C 183 – 09/06/2017 Restriction: With regard to paragraphs 4.2.2, 4.2.6, 4.3.2, 4.3.3, 4.3.4, 4.3.6, this publication does not concern the reference to EN 12453:2000, the application of which does not confer a presumption of conformity to the essential health and safety requirements 1.3.7 and 1.4.3 of Annex I to Directive 2006/42/EC.       19/09/2020       OJ L 286 –  07/11/2019         –
  2006/42/EC   CEN   EN 13288:2005+A1:2009   Food processing machinery – Bowl lifting and tilting machines – Safety and hygiene requirements   C   26/05/2010   OJ C 136 – 26/05/2010     –       –       –
  2006/42/EC   CEN   EN 13289:2001+A1:2013   Pasta processing plants – Dryers and coolers – Safety and hygiene requirements   C   28/11/2013   OJ C 348 – 28/11/2013     –       –       –
  2006/42/EC   CEN   EN 13355:2004+A1:2009   Coating plants – Combined booths – Safety requirements   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   02/10/202 1   OJ L 102 –  02/04/2020
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN EN 13367:2005+A1:2008, EN 13367:2005+A1:2008/AC:200 9   Ceramic machines – Safety – Transfer platforms and cars   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 13378:2001+A1:2013   Pasta processing plants – Pasta presses – Safety and hygiene requirements   C   28/11/2013   OJ C 348 – 28/11/2013     –       –       –
  2006/42/EC   CEN   EN 13379:2001+A1:2013 Pasta processing plants – Spreader, stripping and cutting machine, stick return conveyor, stick magazine – Safety and hygiene requirements   C   28/11/2013   OJ C 348 – 28/11/2013     –       –       –
  2006/42/EC   CEN   EN 13389:2005+A1:2009   Food processing machinery – Mixers with horizontal shafts – Safety and hygiene requirements   C   26/05/2010   OJ C 136 – 26/05/2010     –       –       –
  2006/42/EC   CEN   EN 13390:2002+A1:2009   Food processing machinery – Pie and tart machines – Safety and hygiene requirements   C   26/05/2010   OJ C 136 – 26/05/2010     –       –       –
  2006/42/EC   CEN   EN 13411-1:2002+A1:2008   Terminations for steel wire ropes – Safety – Part 1: Thimbles for steel wire rope slings   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   15/04/202 3   OJ L 366 –  15/10/2021
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 13411-2:2001+A1:2008   Terminations for steel wire ropes – Safety – Part 2: Splicing of eyes for wire rope slings   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   15/04/202 3   OJ L 366 –  15/10/2021
  2006/42/EC   CEN   EN 13411-3:2004+A1:2008   Terminations for steel wire ropes –    Safety – Part 3: Ferrules and ferrule- securing   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   15/04/202 3   OJ L 366 –  15/10/2021
  2006/42/EC   CEN   EN 13411-4:2002+A1:2008   Terminations for steel wire ropes – Safety – Part 4: Metal and resin socketing   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   30/09/201 1   OJ C 214 – 20/07/2011
  2006/42/EC   CEN   EN 13411-4:2011   Terminations for steel wire ropes – Safety – Part 4: Metal and resin socketing   C   20/07/2011   OJ C 214 – 20/07/2011     –       –   15/04/202 3   OJ L 366 –  15/10/2021
  2006/42/EC   CEN   EN 13411-5:2003+A1:2008   Terminations for steel wire ropes – Safety – Part 5: U-bolt wire rope grips   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   15/04/202 3   OJ L 366 –  15/10/2021
  2006/42/EC   CEN   EN 13411-6:2004+A1:2008   Terminations for steel wire ropes –  Safety – Part 6: Asymmetric wedge socket   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   15/04/202 3   OJ L 366 –  15/10/2021
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 13411-7:2006+A1:2008   Terminations for steel wire ropes – Safety – Part 7: Symmetric wedge socket   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   15/04/202 3   OJ L 366 –  15/10/2021
  2006/42/EC   CEN   EN 13411-8:2011   Terminations for steel wire ropes –    Safety – Part 8: Swage terminals and swaging   C   18/11/2011   OJ C 338 – 18/11/2011     –       –   15/04/202 3   OJ L 366 –  15/10/2021
  2006/42/EC   CEN   EN 13414-1:2003+A2:2008   Steel wire rope slings – Safety – Part 1: Slings for general lifting service   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 13414-2:2003+A2:2008 Steel wire rope slings – Safety – Part 2: Specification for information for use and maintenance to be provided by the manufacturer   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 13414-3:2003+A1:2008   Steel wire rope slings – Safety – Part 3: Grommets and cable-laid slings   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 13418:2004+A1:2008   Plastics and rubber machines – Winding machines for film or sheet – Safety requirements   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   30/11/201 3   OJ C 348 – 28/11/2013
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 13418:2013   Plastics and rubber machines – Winding machines for film or sheet – Safety requirements   C   28/11/2013   OJ C 348 – 28/11/2013     –       –       –
  2006/42/EC   CEN   EN 13448:2001+A1:2009   Agricultural and forestry machinery – Inter-row mowing units – Safety   C   29/12/2009   OJ C 309 – 18/12/2009     –       –       –
  2006/42/EC   CEN   EN 13457:2004+A1:2010 Footwear, leather and imitation leather goods manufacturing machines – Splitting, skiving, cutting, cementing and cement drying machines – Safety requirements   C   20/10/2010   OJ C 284 – 20/10/2010     –       –       –
  2006/42/EC   CEN   EN ISO 13482:2014   Robots and robotic devices – Safety    requirements for personal care robots (ISO 13482:2014)   C   11/07/2014   OJ C 220 – 11/07/2014     –       –       –
  2006/42/EC   CEN   EN 13524:2003+A1:2009   Highway maintenance machines – Safety requirements   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   31/08/201 4   OJ C 220 – 11/07/2014
  2006/42/EC   CEN   EN 13524:2003+A2:2014   Highway maintenance machines – Safety requirements   C   11/07/2014   OJ C 220 – 11/07/2014     –       –   02/02/202 5   OJ L 194 –  02/08/2023
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 13525:2020   Forestry machinery – Wood chippers – Safety   C   03/03/2021   OJ L 72 –   03/03/2021     –       –       –
  2006/42/EC   CEN   EN 13525:2005+A2:2009   Forestry machinery – Wood chippers – Safety   C   29/12/2009   OJ C 309 – 18/12/2009     –       –   08/01/201 5   OJ L 365 –  19/12/2014
  2006/42/EC   CEN   EN 13531:2001+A1:2008 Earth-moving machinery – Tip-over protection structure (TOPS) for compact excavators – Laboratory tests and performance requirements (ISO 12117:1997 modified)   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 13534:2006+A1:2010   Food processing machinery – Curing injection machines – Safety and hygiene requirements   C   20/10/2010   OJ C 284 – 20/10/2010     –       –       –
  2006/42/EC   CEN   EN 13557:2024   Cranes – Control devices and control stations   C   16/09/2024   OJ L, 2024/2408 – 16/09/2024     –       –       –
  2006/42/EC   CEN   EN 13557:2003+A2:2008   Cranes – Controls and control stations   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   16/03/202 6   OJ L, 2024/2408 – 16/09/2024
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 13561:2004+A1:2008   External blinds – Performance requirements including safety   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   28/02/201 7   OJ C 14 –  15/01/2016
  2006/42/EC   CEN   EN 13561:2015, EN 13561:2015/AC:2016   External blinds and awnings – Performance requirements including safety   C   15/01/2016   OJ C 14 –  15/01/2016     –       –       –
  2006/42/EC   CEN   EN 13570:2005+A1:2010   Food processing machinery – Mixing machines – Safety and hygiene requirements   C   20/10/2010   OJ C 284 – 20/10/2010     –       –       –
  2006/42/EC   CEN   EN 13586:2020   Cranes – Access   C   15/10/2021   OJ L 366 –  15/10/2021     –       –       –
  2006/42/EC   CEN   EN 13586:2004+A1:2008   Cranes – Access   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   15/04/202 3   OJ L 366 –  15/10/2021
  2006/42/EC   CEN   EN 13591:2005+A1:2009   Food processing machinery – Fixed deck oven loaders – Safety and hygiene requirements   C   26/05/2010   OJ C 136 – 26/05/2010     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 13617-1:2004+A1:2009 Petrol filling stations – Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   30/11/201 2   OJ C 256 – 24/08/2012
  2006/42/EC   CEN   EN 13617-1:2012 Petrol filling stations – Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units   C   24/08/2012   OJ C 256 – 24/08/2012     –       –   02/02/202 5   OJ L 194 –  02/08/2023
  2006/42/EC   CEN   EN 13617-1:2021 Petrol filling stations – Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
  2006/42/EC   CEN   EN 13621:2004+A1:2010   Food processing machinery – Salad dryers – Safety and hygiene requirements   C   20/10/2010   OJ C 284 – 20/10/2010     –       –       –
  2006/42/EC   CEN   EN 13659:2004+A1:2008   Shutters – Performance requirements including safety   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   28/02/201 7   OJ C 14 –  15/01/2016
  2006/42/EC   CEN   EN 13659:2015   Shutters and external venetian blinds – Performance requirements including    safety   C   15/01/2016   OJ C 14 –  15/01/2016     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 13675:2004+A1:2010 Safety of machinery – Safety requirements for tube forming and   rolling mills and their finishing line equipment   C   20/10/2010   OJ C 284 – 20/10/2010     –       –       –
  2006/42/EC   CEN   EN 13683:2003+A1:2009   Garden equipment – Integrally powered shredders/chippers – Safety   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   20/07/201 1   OJ C 214 – 20/07/2011
  2006/42/EC   CEN EN 13683:2003+A2:2011, EN 13683:2003+A2:2011/AC:201 3   Garden equipment – Integrally powered shredders/chippers – Safety   C   20/07/2011   OJ C 214 – 20/07/2011     –       –       –
  2006/42/EC   CEN   EN 13684:2004+A2:2009   Garden equipment – Pedestrian controlled lawn aerators and scarifiers – Safety   C   29/12/2009   OJ C 309 – 18/12/2009     –       –   30/06/201 0   OJ C 136 – 26/05/2010
  2006/42/EC   CEN   EN 13684:2004+A3:2009   Garden equipment – Pedestrian controlled lawn aerators and scarifiers – Safety   C   26/05/2010   OJ C 136 – 26/05/2010     –       –   19/09/202 0   OJ L 286 –  07/11/2019
  2006/42/EC   CEN   EN 13684:2018   Garden equipment – Pedestrian controlled lawn aerators and scarifiers – Safety   C   19/03/2019   OJ L 75 –   19/03/2019     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 13731:2007   Lifting bag systems for fire and rescue service use – Safety and performance    requirements   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 13732:2002+A2:2009 Food processing machinery – Bulk Milk Coolers on Farms – Requirements for construction, performance, suitability for use, safety and hygiene   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   31/01/201 4   OJ C 348 – 28/11/2013
  2006/42/EC   CEN   EN 13732:2013   Food processing machinery – Bulk milk coolers on farms – Requirements for performance, safety and hygiene   C   28/11/2013   OJ C 348 – 28/11/2013     –       –   02/02/202 5   OJ L 194 –  02/08/2023
  2006/42/EC   CEN   EN 13732:2022   Food processing machinery – Bulk milk coolers on farms – Requirements for performance, safety and hygiene   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
  2006/42/EC   CEN   EN 13736:2003+A1:2009   Safety of machine tools – Pneumatic presses   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   19/09/202 1   OJ L 286 –  07/11/2019
  2006/42/EC   CEN   EN ISO 13766-2:2018 Earth-moving and building construction machinery – Electromagnetic compatibility (EMC) of machines with   internal electrical power supply – Part 2: Additional EMC requirements for functional safety (ISO 13766-2:2018)   C   19/03/2019   OJ L 75 –   19/03/2019     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 13852-1:2013   Cranes – Offshore cranes – Part 1: General-purpose offshore cranes   C   28/11/2013   OJ C 348 – 28/11/2013     –       –       –
  2006/42/EC   CEN   EN 13852-3:2021   Cranes – Offshore cranes – Part 3: Light offshore cranes   C   13/04/2022   OJ L 115 –  13/04/2022     –       –       –
  2006/42/EC   CEN   EN 13862:2021   Floor cutting-off machines – Safety   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
  2006/42/EC   CEN   EN 13862:2001+A1:2009   Floor cutting-off machines – Safety   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   02/02/202 5   OJ L 194 –  02/08/2023
  2006/42/EC   CEN   EN 13870:2005+A1:2010   Food processing machinery – Chop cutting machines – Safety and hygiene requirements   C   20/10/2010   OJ C 284 – 20/10/2010     –       –   31/03/201 6   OJ C 14 –  15/01/2016
  2006/42/EC   CEN   EN 13870:2015   Food processing machinery – Portion   cutting machines – Safety and hygiene requirements   C   15/01/2016   OJ C 14 –  15/01/2016     –       –   02/02/202 5   OJ L 194 –  02/08/2023
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 13870:2015+A1:2021   Food processing machinery – Portion   cutting machines – Safety and hygiene requirements   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
  2006/42/EC   CEN   EN 13871:2005+A1:2010   Food processing machinery – Cubes cutting machinery – Safety and hygiene requirements   C   20/10/2010   OJ C 284 – 20/10/2010     –       –   29/02/201 6   OJ C 14 –  15/01/2016
  2006/42/EC   CEN   EN 13871:2014   Food processing machinery – Cubes cutting machinery – Safety and hygiene requirements   C   15/01/2016   OJ C 14 –  15/01/2016     –       –       –
  2006/42/EC   CEN   EN 13885:2022   Food processing machinery – Clipping machines – Safety and hygiene requirements   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
  2006/42/EC   CEN   EN 13885:2005+A1:2010   Food processing machinery – Clipping machines – Safety and hygiene requirements   C   20/10/2010   OJ C 284 – 20/10/2010     –       –   02/02/202 5   OJ L 194 –  02/08/2023
  2006/42/EC   CEN   EN 13886:2005+A1:2010 Food processing machinery – Cooking kettles equipped with powered stirrer   and/or mixer – Safety and hygiene requirements   C   26/05/2010   OJ C 136 – 26/05/2010     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 13889:2003+A1:2008   Forged steel shackles for general lifting purposes – Dee shackles and bow shackles – Grade 6 – Safety   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN EN 13898:2003+A1:2009, EN 13898:2003+A1:2009/AC:201 0   Machine tools – Safety – Sawing machines for cold metal   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   30/06/201 8   OJ C 92 –  09/03/2018
  2006/42/EC   CEN   EN 13951:2003+A1:2008   Liquid pumps – Safety requirements – Agrifoodstuffs equipment – Design rules to ensure hygiene in use   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   31/10/201 2   OJ C 256 – 24/08/2012
  2006/42/EC   CEN   EN 13951:2012   Liquid pumps – Safety requirements – Agrifoodstuffs equipment; Design rules to ensure hygiene in use   C   24/08/2012   OJ C 256 – 24/08/2012     –       –       –
  2006/42/EC   CEN   EN 13954:2005+A1:2010   Food processing machinery – Bread slicers – Safety and hygiene requirements   C   26/05/2010   OJ C 136 – 26/05/2010     –       –       –
  2006/42/EC   CEN   EN 13977:2011 Railway applications – Track – Safety requirements for portable machines and trolleys for construction and maintenance   C   20/07/2011   OJ C 214 – 20/07/2011     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 13985:2003+A1:2009   Machine tools – Safety – Guillotine shears   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 14010:2003+A1:2009 Safety of machinery – Equipment for power driven parking of motor vehicles – Safety and EMC requirements for design, manufacturing, erection and commissioning stages   C   29/12/2009   OJ C 309 – 18/12/2009     –       –       –
  2006/42/EC   CEN   EN 14017:2005+A1:2008   Agricultural and forestry machinery – Solid fertilizer distributors – Safety   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   31/01/201 0   OJ C 309 – 18/12/2009
  2006/42/EC   CEN   EN 14017:2005+A2:2009   Agricultural and forestry machinery – Solid fertilizer distributors – Safety   C   29/12/2009   OJ C 309 – 18/12/2009     –       –   19/09/202 0   OJ L 286 –  07/11/2019
  2006/42/EC   CEN   EN 14018:2005+A1:2009   Agricultural and forestry machinery – Seed drills – Safety   C   29/12/2009   OJ C 309 – 18/12/2009     –       –   02/10/202 1   OJ L 102 –  02/04/2020
  2006/42/EC   CEN   EN 14033-3:2009 Railway applications – Track – Railbound construction and maintenance machines – Part 3: General safety requirements   C   26/05/2010   OJ C 136 – 26/05/2010     –       –   30/06/201 8   OJ C 92 –  09/03/2018
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 14033-3:2017 Railway applications – Track – Railbound construction and maintenance machines – Part 3: General safety requirements   C   09/03/2018   OJ C 92 –  09/03/2018     –       –       –
  2006/42/EC   CEN   EN 14033-3:2009+A1:2011 Railway applications – Track – Railbound construction and maintenance machines – Part 3: General safety requirements   C   29/02/2012   OJ C 61 –  29/02/2012     –       –   30/06/201 8   OJ C 92 –  09/03/2018
  2006/42/EC   CEN   EN 14033-4:2019 Railway applications – Track – Railbound construction and maintenance machines – Part 4: Technical requirements for running, travelling and working on urban rail   C   02/04/2020   OJ L 102 –  02/04/2020     –       –       –
  2006/42/EC   CEN   EN 14043:2005+A1:2009 High rise aerial appliances for fire   service use – Turntable ladders with combined movements – Safety and   performance requirements and test   methods   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   31/07/201 4   OJ C 220 – 11/07/2014
  2006/42/EC   CEN   EN 14043:2014 High rise aerial appliances for fire and rescue service use – Turntable ladders with combined movements – Safety and performance requirements and test methods   C   11/07/2014   OJ C 220 – 11/07/2014     –       –       –
  2006/42/EC   CEN   EN 14044:2005+A1:2009 High rise aerial appliances for fire   service use – Turntable ladders with sequential movements – Safety and  performance requirements and test   methods   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   31/07/201 4   OJ C 220 – 11/07/2014
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 14044:2014 High rise aerial appliances for fire and rescue service use – Turntable ladders with sequential movements – Safety and performance requirements and test methods   C   11/07/2014   OJ C 220 – 11/07/2014     –       –       –
  2006/42/EC   CEN EN 14070:2003+A1:2009, EN 14070:2003+A1:2009/AC:201 0   Safety of machine tools – Transfer and special-purpose machines   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 14238:2004+A1:2009   Cranes – Manually controlled load manipulating devices   C   29/12/2009   OJ C 309 – 18/12/2009     –       –       –
  2006/42/EC   CEN   EN ISO 14314:2009   Reciprocal internal combustion engines – Recoil starting equipment – General safety requirements (ISO 14314:2004)   C   29/12/2009   OJ C 309 – 18/12/2009     –       –       –
  2006/42/EC   CEN   EN 14439:2006+A2:2009   Cranes – Safety – Tower cranes   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 14462:2005+A1:2009 Surface treatment equipment – Noise test code for surface treatment equipment including its ancillary handling equipment – Accuracy grades 2 and 3   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 14466:2005+A1:2008   Fire-fighting pumps – Portable pumps – Safety and performance requirements,   tests   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 14492-1:2006+A1:2009, EN 14492- 1:2006+A1:2009/AC:2010   Cranes – Power driven winches and hoists – Part 1: Power driven winches   C   29/12/2009   OJ C 309 – 18/12/2009     –       –       –
  2006/42/EC   CEN   EN 14492-2:2006+A1:2009, EN 14492- 2:2006+A1:2009/AC:2010   Cranes – Power driven winches and hoists – Part 2: Power driven hoists   C   29/12/2009   OJ C 309 – 18/12/2009     –       –       –
  2006/42/EC   CEN   EN 14502-2:2005+A1:2008   Cranes – Equipment for the lifting of persons – Part 2: Elevating control stations   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 14655:2005+A1:2010   Food processing machinery – Baguette slicers – Safety and hygiene requirements   C   26/05/2010   OJ C 136 – 26/05/2010     –       –       –
  2006/42/EC   CEN   EN 14656:2006+A1:2010   Safety of machinery – Safety requirements for extrusion presses for steel and non-ferrous metals   C   20/10/2010   OJ C 284 – 20/10/2010     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 14658:2005+A1:2010 Continuous handling equipment and systems – General safety requirements  for continuous handling equipment for opencast lignite mining   C   26/05/2010   OJ C 136 – 26/05/2010     –       –       –
  2006/42/EC   CEN   EN 14673:2006+A1:2010 Safety of machinery – Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals   C   20/10/2010   OJ C 284 – 20/10/2010     –       –       –
  2006/42/EC   CEN   EN 14677:2008   Safety of machinery – Secondary steelmaking – Machinery and equipment for treatment of liquid steel   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 14681:2006+A1:2010 Safety of machinery – Safety requirements for machinery and equipment for production of steel by electric arc furnaces   C   20/10/2010   OJ C 284 – 20/10/2010     –       –       –
  2006/42/EC   CEN   EN 14710-1:2005+A2:2008 Fire-fighting pumps – Fire-fighting centrifugal pumps without primer – Part 1: Classification, general and safety requirements   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 14710-2:2005+A2:2008 Fire-fighting pumps – Fire-fighting centrifugal pumps without primer – Part 2: Verification of general and safety requirements   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 14753:2007 Safety of machinery – Safety requirements for machinery and equipment for continuous casting of steel   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 14861:2004+A1:2009   Forest machinery – Self propelled machinery – Safety requirements   C   29/12/2009   OJ C 309 – 18/12/2009     –       –   31/05/201 2   OJ C 61 –  29/02/2012
  2006/42/EC   CEN   EN 14886:2008   Plastics and rubber machines – Bandknife cutting machines for block foams – Safety requirements   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 14910:2007+A1:2009   Garden equipment – Walk-behind combustion engine powered trimmers – Safety   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 14930:2007+A1:2009 Agricultural and forestry machinery and gardening equipment – Pedestrian controlled and hand-held machines – Determination of accessibility of hot surfaces   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 14957:2006+A1:2010   Food processing machinery – Dishwashing machines with conveyor – Safety and hygiene requirements   C   26/05/2010   OJ C 136 – 26/05/2010     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 14958:2006+A1:2009 Food processing machinery – Machinery for grinding and processing flour and semolina – Safety and hygiene requirements   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 14973:2015   Conveyor belts for use in underground installations – Electrical and flammability safety requirements   C   13/05/2016   OJ C 173 – 13/05/2016     –       –       –
  2006/42/EC   CEN   EN 14973:2006+A1:2008   Conveyor belts for use in underground installations – Electrical and flammability safety requirements   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   31/05/201 6   OJ C 173 – 13/05/2016
  2006/42/EC   CEN   EN ISO 14982:2009 Agricultural and forestry machinery – Electromagnetic compatibility – Test  methods and acceptance criteria (ISO 14982:1998)   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 14985:2012   Cranes – Slewing jib cranes   C   23/03/2012   OJ C 87 –  23/03/2012     –       –       –
  2006/42/EC   CEN   EN 15000:2008 Safety of industrial trucks – Self propelled variable reach trucks – Specification, performance and test requirements for longitudinal load moment indicators and longitudinal load moment limiters   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 15011:2011   Cranes – Bridge and gantry cranes   C   20/07/2011   OJ C 214 – 20/07/2011     –       –   31/08/201 4   OJ C 220 – 11/07/2014
  2006/42/EC   CEN   EN 15011:2020   Cranes – Bridge and gantry cranes   C   15/10/2021   OJ L 366 –  15/10/2021     –       –       –
  2006/42/EC   CEN   EN 15011:2011+A1:2014   Cranes – Bridge and gantry cranes   C   11/07/2014   OJ C 220 – 11/07/2014     –       –   15/04/202 3   OJ L 366 –  15/10/2021
  2006/42/EC   CEN   EN ISO 15012-4:2016 Health and safety in welding and allied processes – Equipment for capture and  separation of welding fume – Part 4: General requirements (ISO 15012- 4:2016)   C   09/06/2017   OJ C 183 – 09/06/2017     –       –   03/09/202 2   OJ L 72 –   03/03/2021
  2006/42/EC   CEN   EN 15027:2007+A1:2009   Transportable wall saw and wire saw equipment for job site – Safety   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 15056:2006+A1:2009   Cranes – Requirements for container handling spreaders   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 15059:2009   Snow grooming equipment – Safety requirements   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   29/02/201 6   OJ C 14 –  15/01/2016
  2006/42/EC   CEN   EN 15059:2009+A1:2015   Snow grooming equipment – Safety requirements   C   15/01/2016   OJ C 14 –  15/01/2016     –       –       –
  2006/42/EC   CEN   EN 15061:2007+A1:2008   Safety of machinery – Safety requirements for strip processing line machinery and equipment   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 15067:2007   Plastics and rubber machines – Film converting machines for bags and sacks – Safety requirements   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 15093:2008   Safety of Machinery – Safety requirements for hot flat rolling mills   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 15094:2008   Safety of Machinery – Safety requirements for cold flat rolling mills   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 15095:2007+A1:2008   Power-operated mobile racking and   shelving, carousels and storage lifts – Safety requirements   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 15162:2008   Machines and plants for mining and tooling of natural stone – Safety requirements for gang saws   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 15163:2008 Machines and installations for the exploitation and processing of natural stone – Safety – Requirements for diamond wire saws   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   02/02/202 4   OJ L 194 –  02/08/2023
  2006/42/EC   CEN   EN 15163-1:2022 Machines and installations for the exploitation and processing of natural stone – Safety – Part 1: Requirements for stationary diamond wire saws   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
  2006/42/EC   CEN   EN 15163-2:2022 Machines and installations for the exploitation and processing of natural stone – Safety – Part 2: Requirements for transportable diamond wire saws   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
  2006/42/EC   CEN   EN 15164:2008 Machines and plants for mining and tooling of natural stone – Safety – Requirements for chain- and belt- slotting machines   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 15166:2008 Food processing machinery – Automatic back splitting machines of butchery carcasses – Safety and hygiene requirements   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
                  2006/42/EC                   CEN                   EN 15194:2017                   Cycles – Electrically power assisted cycles – EPAC Bicycles                   C                   19/03/2019                   OJ L 75 –   19/03/2019 Restriction 1: Harmonised standard EN 15194:2017 does not confer a presumption of conformity with the essential health and safety requirements set out in points 1.5.5, 1.5.6 and 1.5.7 of Annex I to Directive 2006/42/EC, which require machinery to be designed and constructed to take into account   the risks associated with extreme temperatures, fire and explosion. Restriction 2: Harmonised standard EN 15194:2017 does not confer a presumption of conformity with the essential health and safety requirements set out in points 1.5.9 and 3.6.3.1 of Annex I to Directive 2006/42/EC, which require machinery to be designed and    constructed to take into account the risks resulting from vibrations, and that machinery must be provided with the measurement of vibrations transmitted by the machinery to the operator of the machinery.                   10/01/2023                   OJ L 7 – 10/01/2023                   15/05/202 6                 OJ L, 2024/1329 – 15/05/2024
    2006/42/EC     CEN     EN 15194:2017+A1:2023     Cycles – Electrically power assisted cycles – EPAC Bicycles     C         – Restriction: Harmonised standard EN 15194:2017+A1:2023 does not confer a presumption of conformity with the essential health and safety requirements set out in points 1.5.9 and 3.6.3.1 of Annex I to Directive 2006/42/EC, which require     15/05/2024     OJ L, 2024/1329 – 15/05/2024         –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
              machinery to be designed and    constructed to take into account the risks resulting from vibrations, and that machinery must be provided with the measurement of vibrations transmitted by the machinery to the operator of the machinery.        
  2006/42/EC   CEN   EN 15268:2008   Petrol filling stations – Safety requirements for the construction of submersible pump assemblies   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 15503:2009   Garden equipment – Garden blowers,    vacuums and blower/vacuums – Safety   C   26/05/2010   OJ C 136 – 26/05/2010     –       –   30/04/201 4   OJ C 110 – 11/04/2014
  2006/42/EC   CEN   EN 15503:2009+A1:2013   Garden equipment – Garden blowers,    vacuums and blower/vacuums – Safety   C   11/04/2014   OJ C 110 – 11/04/2014     –       –   30/06/201 7   OJ C 173 – 13/05/2016
  2006/42/EC   CEN   EN 15503:2009+A2:2015   Garden equipment – Garden blowers,    vacuums and blower/vacuums – Safety   C   13/05/2016   OJ C 173 – 13/05/2016     –       –       –
  2006/42/EC   CEN   EN 15571:2020 Machines and plants for mining and tooling of natural stone – Safety – Requirements for surface-finishing machines   C   15/10/2021   OJ L 366 –  15/10/2021     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 15572:2015 Machines and plants for mining and tooling of natural stone – Safety – Requirements for edge finishing machines   C   15/01/2016   OJ C 14 –  15/01/2016     –       –       –
  2006/42/EC   CEN   EN 15695-1:2009 Agricultural tractors and self-propelled sprayers – Protection of the operator (driver) against hazardous substances –  Part 1: Cab classification, requirements and test procedures   C   26/05/2010   OJ C 136 – 26/05/2010     –       –   30/06/201 8   OJ C 92 –  09/03/2018
  2006/42/EC   CEN   EN 15695-1:2017 Agricultural tractors and self-propelled sprayers – Protection of the operator (driver) against hazardous substances –  Part 1: Cab classification, requirements and test procedures   C   09/03/2018   OJ C 92 –  09/03/2018     –       –       –
  2006/42/EC   CEN   EN 15695-2:2009 Agricultural tractors and self-propelled sprayers – Protection of the operator (driver) against hazardous substances – Part 2: Filters, requirements and test procedures   C   26/05/2010   OJ C 136 – 26/05/2010     –       –   30/06/201 8   OJ C 92 –  09/03/2018
  2006/42/EC   CEN   EN 15695-2:2017 Agricultural tractors and self-propelled sprayers – Protection of the operator (driver) against hazardous substances – Part 2: Filters, requirements and test procedures   C   09/03/2018   OJ C 92 –  09/03/2018     –       –       –
  2006/42/EC   CEN   EN 15700:2011   Safety for conveyor belts for winter sport or leisure use   C   29/02/2012   OJ C 61 –  29/02/2012     –       –   15/11/202 5   OJ L, 2024/1329 – 15/05/2024
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
    2006/42/EC     CEN     EN 15700:2023     Safety for conveyor belts for winter sport or tourist use     C         – Restriction: With regard to paragraph 7.3 of this harmonised standard, compliance with this harmonised standard does not confer a presumption of conformity to the essential health and safety requirement 1.7.4.2. (u) of Annex I to Directive 2006/42/EC.     15/05/2024     OJ L, 2024/1329 – 15/05/2024         –
  2006/42/EC   CEN   EN ISO 15744:2008   Hand-held non-electric power tools – Noise measurement code – Engineering method (grade 2) (ISO 15744:2002)   C   29/12/2009   OJ C 214 – 08/09/2009     –       –       –
  2006/42/EC   CEN   EN 15746-2:2010   Railway applications – Track – Road-rail machines and associated equipment – Part 2: General safety requirements   C   20/10/2010   OJ C 284 – 20/10/2010     –       –   30/04/201 2   OJ C 61 –  29/02/2012
  2006/42/EC   CEN   EN 15746-2:2010+A1:2011   Railway applications – Track – Road-rail machines and associated equipment – Part 2: General safety requirements   C   29/02/2012   OJ C 61 –  29/02/2012     –       –       –
  2006/42/EC   CEN   EN 15774:2010 Food processing machinery – Machines for processing fresh and filled pasta (tagliatelle, cannelloni, ravioli, tortellini, orecchiette and gnocchi) – Safety and hygiene requirements   C   08/04/2011   OJ C 110 – 08/04/2011     –       –       –
  2006/42/EC   CEN   EN 15811:2009 Agricultural machinery – Guards for   moving parts of power transmission – Guard opening with tool (ISO/TS 28923:2007 modified)   C   29/12/2009   OJ C 309 – 18/12/2009     –       –   29/02/201 6   OJ C 14 –  15/01/2016
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 15811:2014 Agricultural machinery – Fixed guards  and interlocked guards with or without guard locking for moving transmission parts (ISO/TS 28923:2012 modified)   C   15/01/2016   OJ C 14 –  15/01/2016     –       –       –
  2006/42/EC   CEN   EN 15830:2012   Rough-terrain variable reach trucks – Visibility – Test methods and verification   C   24/08/2012   OJ C 256 – 24/08/2012     –       –       –
  2006/42/EC   CEN   EN 15861:2012   Food processing machinery – Smokehouses – Safety and hygiene requirements   C   24/08/2012   OJ C 256 – 24/08/2012     –       –       –
  2006/42/EC   CEN   EN 15895:2011   Cartridge operated hand-held tools –    Safety requirements – Fixing and hard marking tools   C   18/11/2011   OJ C 338 – 18/11/2011     –       –   19/09/202 0   OJ L 286 –  07/11/2019
  2006/42/EC   CEN   EN 15895:2011+A1:2018   Cartridge operated hand-held tools –    Safety requirements – Fixing and hard marking tools   C   19/03/2019   OJ L 75 –   19/03/2019     –       –       –
  2006/42/EC   CEN   EN 15949:2012   Safety of machinery – Safety requirements for bar mills, structural steel mills and wire rod mills   C   05/06/2012   OJ C 159 – 05/06/2012     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 15954-2:2013   Railway applications – Track – Trailers and associated equipment – Part 2: General safety requirements   C   28/11/2013   OJ C 348 – 28/11/2013     –       –       –
  2006/42/EC   CEN   EN 15955-2:2013 Railway applications – Track – Demountable machines and associated equipment – Part 2: General safety requirements   C   28/11/2013   OJ C 348 – 28/11/2013     –       –       –
            2006/42/EC             CEN             EN 15997:2011, EN 15997:2011/AC:2012             All terrain vehicles (ATVs – Quads) – Safety requirements and test methods           C             29/02/2012             OJ C 61 –  29/02/2012 Restriction: This harmonised standard does not confer a presumption of conformity with the essential health and safety requirements set out in point 1.1.2. of Annex I to Directive 2006/42/EC, which requires compliance with the principles of safety integration and reasonably foreseeable misuse of the vehicle, point 1.3.1. of Annex I to Directive 2006/42/EC, which requires lateral and longitudinal stability mitigation, and point 3.4.1. of    Annex I to Directive 2006/42/EC, which requires prevention of uncontrolled   movement.             30/04/2024           OJ L, 2024/1256 – 30/04/2024               –
  2006/42/EC   CEN   EN 16005:2012, EN 16005:2012/AC:2015   Power operated pedestrian doorsets – Safety in use – Requirements and test methods   C   05/04/2013   OJ C 99 –  05/04/2013     –       –   16/03/202 6   OJ L, 2024/2408 – 16/09/2024
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 16005:2023+A1:2024   Power operated pedestrian doorsets – Safety in use – Requirements and test methods   C   16/09/2024   OJ L, 2024/2408 – 16/09/2024     –       –       –
  2006/42/EC   CEN   EN 16029:2012 Ride-on, motorized vehicles intended for the transportation of persons and not intended for use on public roads – Single-track two-wheel motor vehicles – Safety requirements and test methods   C   24/08/2012   OJ C 256 – 24/08/2012     –       –       –
  2006/42/EC   CEN   EN ISO 16089:2015   Machine tools – Safety – Stationary grinding machines (ISO 16089:2015)   C   13/05/2016   OJ C 173 – 13/05/2016     –       –       –
  2006/42/EC   CEN   EN ISO 16092-1:2018   Machine tools safety – Presses – Part 1: General safety requirements (ISO 16092-1:2017)   C   19/03/2019   OJ L 75 –   19/03/2019     –       –       –
  2006/42/EC   CEN   EN ISO 16092-2:2020   Machine tools safety – Presses – Part 2: Safety requirement for mechanical presses (ISO 16092-2:2019)   C   15/10/2021   OJ L 366 –  15/10/2021     –       –       –
  2006/42/EC   CEN   EN ISO 16092-3:2018   Machine tools safety – Presses – Part 3: Safety requirements for hydraulic presses (ISO 16092-3:2017)   C   19/03/2019   OJ L 75 –   19/03/2019     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN ISO 16092-4:2020   Machine tools safety – Presses – Part 4: Safety requirements for pneumatic presses (ISO 16092-4:2019)   C   15/10/2021   OJ L 366 –  15/10/2021     –       –       –
  2006/42/EC   CEN   EN ISO 16093:2017   Machine tools – Safety – Sawing machines for cold metal (ISO 16093:2017)   C   09/03/2018   OJ C 92 –  09/03/2018     –       –       –
  2006/42/EC   CEN   EN ISO 16119-1:2013 Agricultural and forestry machinery – Environmental requirements for sprayers – Part 1: General (ISO 16119- 1:2013)   C   28/11/2013   OJ C 348 – 28/11/2013     –       –       –
  2006/42/EC   CEN   EN ISO 16119-2:2013 Agricultural and forestry machinery – Environmental requirements for sprayers – Part 2: Horizontal boom sprayers (ISO 16119-2:2013, Corrected version 2017-03)   C   28/11/2013   OJ C 348 – 28/11/2013     –       –       –
  2006/42/EC   CEN   EN ISO 16119-3:2013 Agricultural and forestry machinery – Environmental requirements for sprayers – Part 3: Sprayers for bush and tree crops (ISO 16119-3:2013)   C   28/11/2013   OJ C 348 – 28/11/2013     –       –       –
  2006/42/EC   CEN   EN ISO 16119-4:2014 Agricultural and forestry machinery – Environmental requirements for sprayers – Part 4: Fixed and semi-mobile sprayers (ISO 16119-4:2014)   C   15/01/2016   OJ C 14 –  15/01/2016     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 16191:2014   Tunnelling machinery – Safety requirements   C   13/02/2015   OJ C 54 –  13/02/2015     –       –       –
  2006/42/EC   CEN   EN 16203:2014   Safety of Industrial Trucks – Dynamic    tests for verification of lateral stability – Counterbalanced Trucks   C   13/02/2015   OJ C 54 –  13/02/2015     –       –       –
  2006/42/EC   CEN   EN 16228-1:2014   Drilling and foundation equipment – Safety – Part 1: Common requirements   C   13/02/2015   OJ C 54 –  13/02/2015     –       –   02/02/202 5   OJ L 194 –  02/08/2023
  2006/42/EC   CEN   EN 16228-1:2014+A1:2021   Drilling and foundation equipment – Safety – Part 1: Common requirements   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
  2006/42/EC   CEN   EN 16228-2:2014 Drilling and foundation equipment – Safety – Part 2: Mobile drill rigs for civil and geotechnical engineering, quarrying  and mining   C   13/02/2015   OJ C 54 –  13/02/2015     –       –   02/02/202 5   OJ L 194 –  02/08/2023
  2006/42/EC   CEN   EN 16228-2:2014+A1:2021 Drilling and foundation equipment – Safety – Part 2: Mobile drill rigs for civil and geotechnical engineering, quarrying  and mining   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 16228-3:2014   Drilling and foundation equipment –   Safety – Part 3: Horizontal directional drilling equipment (HDD)   C   13/02/2015   OJ C 54 –  13/02/2015     –       –   02/02/202 5   OJ L 194 –  02/08/2023
  2006/42/EC   CEN   EN 16228-3:2014+A1:2021   Drilling and foundation equipment –   Safety – Part 3: Horizontal directional drilling equipment (HDD)   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
  2006/42/EC   CEN   EN 16228-4:2014   Drilling and foundation equipment –    Safety – Part 4: Foundation equipment   C   13/02/2015   OJ C 54 –  13/02/2015     –       –   02/02/202 5   OJ L 194 –  02/08/2023
  2006/42/EC   CEN   EN 16228-4:2014+A1:2021   Drilling and foundation equipment –    Safety – Part 4: Foundation equipment   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
  2006/42/EC   CEN   EN 16228-5:2014   Drilling and foundation equipment – Safety – Part 5: Diaphragm walling   equipment   C   13/02/2015   OJ C 54 –  13/02/2015     –       –   02/02/202 5   OJ L 194 –  02/08/2023
  2006/42/EC   CEN   EN 16228-5:2014+A1:2021   Drilling and foundation equipment – Safety – Part 5: Diaphragm walling   equipment   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 16228-6:2014   Drilling and foundation equipment – Safety – Part 6: Jetting, grouting and injection equipment   C   13/02/2015   OJ C 54 –  13/02/2015     –       –   02/02/202 5   OJ L 194 –  02/08/2023
  2006/42/EC   CEN   EN 16228-6:2014+A1:2021   Drilling and foundation equipment – Safety – Part 6: Jetting, grouting and injection equipment   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
  2006/42/EC   CEN   EN 16228-7:2014   Drilling and foundation equipment – Safety – Part 7: Interchangeable auxiliary equipment   C   13/02/2015   OJ C 54 –  13/02/2015     –       –   02/02/202 5   OJ L 194 –  02/08/2023
  2006/42/EC   CEN   EN 16228-7:2014+A1:2021   Drilling and foundation equipment – Safety – Part 7: Interchangeable auxiliary equipment   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
  2006/42/EC   CEN   EN 16230-1:2013   Leisure karts – Part 1: Safety requirements and test methods for karts   C   28/11/2013   OJ C 348 – 28/11/2013     –       –   29/02/201 6   OJ C 14 –  15/01/2016
  2006/42/EC   CEN   EN 16230-1:2013+A1:2014   Leisure karts – Part 1: Safety requirements and test methods for karts   C   15/01/2016   OJ C 14 –  15/01/2016     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN ISO 16230-1:2015 Agricultural machinery and tractors –  Safety of higher voltage electrical and electronic components and systems –   Part 1: General requirements (ISO 16230-1:2015)   C   15/01/2016   OJ C 14 –  15/01/2016     –       –       –
  2006/42/EC   CEN   EN ISO 16231-1:2013   Self-propelled agricultural machinery – Assessment of stability – Part 1: Principles (ISO 16231-1:2013)   C   28/11/2013   OJ C 348 – 28/11/2013     –       –       –
  2006/42/EC   CEN   EN ISO 16231-2:2015 Self-propelled agricultural machinery – Assessment of stability – Part 2: Determination of static stability and test procedures (ISO 16231-2:2015)   C   15/01/2016   OJ C 14 –  15/01/2016     –       –       –
  2006/42/EC   CEN   EN 16246:2012   Agricultural machinery – Backhoes – Safety   C   05/04/2013   OJ C 99 –  05/04/2013     –       –       –
  2006/42/EC   CEN   EN 16252:2012 Machines for compacting waste    materials or recyclable fractions – Horizontal baling presses – Safety requirements   C   05/04/2013   OJ C 99 –  05/04/2013     –       –       –
  2006/42/EC   CEN   EN 16307-1:2013 Industrial trucks – Safety requirements    and verification – Part 1: Supplementary requirements for self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks   C   05/04/2013   OJ C 99 –  05/04/2013     –       –   29/02/201 6   OJ C 14 –  15/01/2016
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 16307-1:2020 Industrial trucks – Safety requirements    and verification – Part 1: Supplementary requirements for self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks   C   15/10/2021   OJ L 366 –  15/10/2021     –       –       –
  2006/42/EC   CEN   EN 16307-1:2013+A1:2015 Industrial trucks – Safety requirements    and verification – Part 1: Supplementary requirements for self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks   C   15/01/2016   OJ C 14 –  15/01/2016     –       –   15/04/202 3   OJ L 366 –  15/10/2021
  2006/42/EC   CEN   EN 16307-5:2013 Industrial trucks – Safety requirements    and verification – Part 5: Supplementary requirements for pedestrian-propelled trucks   C   11/07/2014   OJ C 220 – 11/07/2014     –       –   15/11/202 5   OJ L, 2024/1329 – 15/05/2024
  2006/42/EC   CEN   EN 16307-5:2023 Industrial trucks – Safety requirements    and verification – Part 5: Supplementary requirements for pedestrian-propelled trucks   C   15/05/2024   OJ L, 2024/1329 – 15/05/2024     –       –       –
  2006/42/EC   CEN   EN 16307-6:2014 Industrial trucks – Safety requirements    and verification – Part 6: Supplementary requirements for burden and personnel   carriers   C   11/07/2014   OJ C 220 – 11/07/2014     –       –       –
  2006/42/EC   CEN   EN 16327:2014   Fire-fighting – Positive-pressure proportioning systems (PPPS) and compressed-air foam systems (CAFS)   C   11/07/2014   OJ C 220 – 11/07/2014     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 16474:2015   Plastics and rubber machines – Tyre curing machines – Safety requirements   C   15/01/2016   OJ C 14 –  15/01/2016     –       –       –
  2006/42/EC   CEN   EN 16486:2014   Machines for compacting waste materials or recyclable fractions –  Compactors – Safety requirements   C   15/01/2016   OJ C 14 –  15/01/2016     –       –   15/04/202 3   OJ L 366 –  15/10/2021
  2006/42/EC   CEN   EN 16486:2014+A1:2020   Machines for compacting waste materials or recyclable fractions –  Compactors – Safety requirements   C   15/10/2021   OJ L 366 –  15/10/2021     –       –       –
  2006/42/EC   CEN   EN 16500:2014 Machines for compacting waste    materials or recyclable fractions – Vertical baling presses – Safety requirements   C   15/01/2016   OJ C 14 –  15/01/2016     –       –       –
  2006/42/EC   CEN   EN 16517:2021   Agricultural and forestry machinery – Mobile yarders for timber logging –    Safety   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
  2006/42/EC   CEN   EN 16564:2020 Machines and plants for mining and tooling of natural stone – Safety – Requirements for bridge type sawing/milling machines, included numerical control (NC/CNC) versions   C   15/10/2021   OJ L 366 –  15/10/2021     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 16590-3:2014 Tractors and machinery for agriculture and forestry – Safety-related parts of control systems – Part 3: Series development, hardware and software (ISO 25119-3:2010 modified)   C   13/02/2015   OJ C 54 –  13/02/2015     –       –   15/11/202 5   OJ L, 2024/1329 – 15/05/2024
  2006/42/EC   CEN   EN 16590-4:2014 Tractors and machinery for agriculture and forestry – Safety-related parts of control systems – Part 4: Production, operation, modification and supporting   processes (ISO 25119-4:2010 modified)   C   13/02/2015   OJ C 54 –  13/02/2015     –       –   15/11/202 5   OJ L, 2024/1329 – 15/05/2024
  2006/42/EC   CEN   EN 16712-4:2018 Portable equipment for projecting extinguishing agents supplied by firefighting pumps – Portable foam  equipment – Part 4: High expansion foam generators PN16   C   02/04/2020   OJ L 102 –  02/04/2020     –       –       –
  2006/42/EC   CEN   EN 16719:2018   Transport platforms   C   19/03/2019   OJ L 75 –   19/03/2019     –       –       –
  2006/42/EC   CEN   EN 16743:2016   Food processing machinery – Automatic industrial slicing machines – Safety and  hygiene requirements   C   09/09/2016   OJ C 332 – 09/09/2016     –       –       –
  2006/42/EC   CEN   EN 16770:2018   Safety of woodworking machines – Chip and dust extraction systems for indoor installation – Safety requirements   C   02/04/2020   OJ L 102 –  02/04/2020     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 16774:2016   Safety of machinery – Safety requirements for steel converter and associated equipment   C   09/09/2016   OJ C 332 – 09/09/2016     –       –       –
  2006/42/EC   CEN   EN 16808:2020   Petroleum, petrochemical and natural   gas industries – Safety of machineries – Manual elevators   C   15/10/2021   OJ L 366 –  15/10/2021     –       –       –
  2006/42/EC   CEN   EN 16851:2017   Cranes – Light crane systems   C   09/06/2017   OJ C 183 – 09/06/2017     –       –   15/04/202 3   OJ L 366 –  15/10/2021
  2006/42/EC   CEN   EN 16851:2017+A1:2020   Cranes – Light crane systems   C   15/10/2021   OJ L 366 –  15/10/2021     –       –       –
  2006/42/EC   CEN   EN 16952:2018   Agricultural machinery – Rough-terrain Work Platforms for Orchard’s operations (WPO) – Safety   C   19/03/2019   OJ L 75 –   19/03/2019     –       –   02/02/202 5   OJ L 194 –  02/08/2023
  2006/42/EC   CEN   EN 16952:2018+A1:2021   Agricultural machinery – Rough-terrain Work Platforms for Orchard’s operations (WPO) – Safety   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 16985:2018   Spray booths for organic coating material – Safety requirements   C   02/04/2020   OJ L 102 –  02/04/2020     –       –       –
  2006/42/EC   CEN   EN 17003:2021   Road vehicles – Roller brake testers for vehicles of more than 3,5 tons GVW –   Safety requirements   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
  2006/42/EC   CEN   EN 17059:2018   Plating and anodizing lines – Safety requirements   C   19/03/2019   OJ L 75 –   19/03/2019     –       –       –
  2006/42/EC   CEN   EN 17067:2018   Forestry machinery – Safety requirements on radio remote controls   C   02/04/2020   OJ L 102 –  02/04/2020     –       –       –
  2006/42/EC   CEN   EN 17088:2021   Side curtain ventilation systems – Safety   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
  2006/42/EC   CEN   EN 17106-1:2021   Road operation machinery – Safety – Part 1: General requirements   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 17106-2:2021   Road operation machinery – Safety –   Part 2: Specific requirements for road surface cleaning machines   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
  2006/42/EC   CEN   EN 17106-3-1:2021 Road operation machinery – Safety – Part 3-1: Winter service machines – Requirements for snow clearing machines with rotating tools and snow ploughs   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
  2006/42/EC   CEN   EN 17106-3-2:2021 Road operation machinery – Safety – Part 3-2: Winter service machines –   Specific requirements for spreading  machines   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
  2006/42/EC   CEN   EN 17106-4:2021 Road operation machinery – Safety – Part 4: Road service area maintenance  machines – Requirements for grass and brush cutting machines   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
  2006/42/EC   CEN   EN 17281:2021   Safety requirements – Vehicle cleaning equipment   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
  2006/42/EC   CEN   EN 17348:2022   Requirements for design and testing of vacuum cleaners for use in potentially   explosive atmospheres   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN 17352:2022   Power operated pedestrian entrance control equipment – Safety in use –  Requirements and test methods   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
  2006/42/EC   CEN   EN ISO 17916:2016   Safety of thermal cutting machines (ISO 17916:2016)   C   09/09/2016   OJ C 332 – 09/09/2016     –       –       –
  2006/42/EC   CEN   EN ISO 18063-2:2021 Rough-terrain trucks – Visibility test methods and their verification – Part 2: Slewing rough-terrain variable-reach    trucks (ISO 18063-2:2021)   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
  2006/42/EC   CEN   EN ISO 18217:2015   Safety of woodworking machines – Edge-banding machines fed by chain(s) (ISO 18217:2015)   C   15/01/2016   OJ C 14 –  15/01/2016     –       –   02/02/202 5   OJ L 194 –  02/08/2023
  2006/42/EC   CEN   EN ISO 19085-1:2017   Woodworking machines – Safety – Part 1: Common requirements (ISO 19085-  1:2017)   C   09/03/2018   OJ C 92 –  09/03/2018     –       –   11/10/202 3   OJ L 115 –  13/04/2022
  2006/42/EC   CEN   EN ISO 19085-1:2021   Woodworking machines – Safety – Part 1: Common requirements (ISO 19085-  1:2021)   C   13/04/2022   OJ L 115 –  13/04/2022     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN ISO 19085-2:2017 Woodworking machines – Safety – Part 2: Horizontal beam panel circular sawing machines (ISO 19085-2:2017, Corrected version 2017-11-01)   C   09/03/2018   OJ C 92 –  09/03/2018     –       –   02/02/202 5   OJ L 194 –  02/08/2023
  2006/42/EC   CEN   EN ISO 19085-2:2021   Woodworking machines – Safety – Part 2: Horizontal beam panel circular sawing machines (ISO 19085-2:2021)   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
      2006/42/EC       CEN       EN ISO 19085-3:2017     Woodworking machines – Safety requirements – Part 3: Numerically  controlled (NC) boring and routing machines (ISO 19085-3:2017)       C         – Restriction: With regard to its point 6.6.2.2.3.1, the harmonised standard EN ISO 19085-3:2017   does not confer a presumption of conformity with the essential health and safety requirement set out in point 1.4.1 of Annex I to    Directive 2006/42/EC, which requires that guards and protective devices must not be easy to by-pass.       24/10/2019       OJ L 270 –  24/10/2019       02/02/202 5       OJ L 194 –  02/08/2023
  2006/42/EC   CEN   EN ISO 19085-3:2021 Woodworking machines – Safety – Part 3: Numerically controlled (NC/CNC)    boring and routing machines (ISO 19085-3:2021)   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
  2006/42/EC   CEN   EN ISO 19085-4:2018   Woodworking machines – Safety – Part 4: Vertical panel circular sawing machines (ISO 19085-4:2018)   C   19/03/2019   OJ L 75 –   19/03/2019     –       –       –
  2006/42/EC   CEN   EN ISO 19085-5:2017   Woodworking machines – Safety – Part  5: Dimension saws (ISO 19085-5:2017)   C   09/03/2018   OJ C 92 –  09/03/2018     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN ISO 19085-6:2017 Woodworking machines – Safety – Part 6: Single spindle vertical moulding machines (“toupies”) (ISO 19085- 6:2017)   C   19/03/2019   OJ L 75 –   19/03/2019     –       –       –
  2006/42/EC   CEN   EN ISO 19085-7:2019 Woodworking machines – Safety – Part 7: Surface planing, thickness planing,   combined surface/thickness planing machines (ISO 19085-7:2019)   C   02/04/2020   OJ L 102 –  02/04/2020     –       –       –
  2006/42/EC   CEN   EN ISO 19085-8:2018 Woodworking machines – Safety – Part    8: Belt sanding and calibrating machines for straight workpieces (ISO 19085- 8:2017)   C   19/03/2019   OJ L 75 –   19/03/2019     –       –       –
  2006/42/EC   CEN   EN ISO 19085-9:2020 Woodworking machines – Safety – Part 9: Circular saw benches (with and without sliding table) (ISO 19085- 9:2019)   C   03/03/2021   OJ L 72 –   03/03/2021     –       –       –
  2006/42/EC   CEN   EN ISO 19085-10:2019, EN ISO 19085- 10:2019/A11:2020   Woodworking machines – Safety – Part   10: Building site saws (contractor saws) (ISO 19085-10:2018)   C   15/10/2021   OJ L 366 –  15/10/2021     –       –       –
  2006/42/EC   CEN   EN ISO 19085-11:2020   Woodworking machines – Safety – Part 11: Combined machines (ISO 19085-    11:2020)   C   03/03/2021   OJ L 72 –   03/03/2021     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN ISO 19085-12:2021, EN ISO 19085- 12:2021/A11:2023   Woodworking machines – Safety – Part 12: Tenoning/profiling machines (ISO  19085-12:2021)   C   15/05/2024   OJ L, 2024/1329 – 15/05/2024     –       –       –
  2006/42/EC   CEN   EN ISO 19085-13:2020 Woodworking machines – Safety – Part 13: Multi-blade rip sawing machines with manual loading and/or unloading (ISO 19085-13:2020)   C   03/03/2021   OJ L 72 –   03/03/2021     –       –       –
  2006/42/EC   CEN   EN ISO 19085-14:2021   Woodworking machines – Safety – Part   14: Four-sided moulding machines (ISO 19085-14:2021)   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
  2006/42/EC   CEN   EN ISO 19085-15:2021   Woodworking machines – Safety – Part 15: Presses (ISO 19085-15:2021)   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
  2006/42/EC   CEN   EN ISO 19085-16:2021   Woodworking machines – Safety – Part 16: Table band saws and band re-saws  (ISO 19085-16:2021)   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
  2006/42/EC   CEN   EN ISO 19085-17:2021   Woodworking machines – Safety – Part 17: Edge banding machines fed by chains (ISO 19085-17:2021)   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN ISO 19225:2017 Underground mining machines – Mobile extracting machines at the face – Safety   requirements for shearer loaders and plough systems (ISO 19225:2017)   C   19/03/2019   OJ L 75 –   19/03/2019     –       –   03/09/202 2   OJ L 72 –   03/03/2021
  2006/42/EC   CEN   EN ISO 19225:2017, EN ISO 19225:2017/A1:2019 Underground mining machines – Mobile extracting machines at the face – Safety   requirements for shearer loaders and plough systems (ISO 19225:2017)   C   03/03/2021   OJ L 72 –   03/03/2021     –       –       –
  2006/42/EC   CEN   EN ISO 19296:2018   Mining – Mobile machines working underground – Machine safety (ISO 19296:2018)   C   02/04/2020   OJ L 102 –  02/04/2020     –       –       –
  2006/42/EC   CEN   EN ISO 19432:2008 Building construction machinery and equipment – Portable, hand-held, internal combustion engine driven cut-  off machines – Safety requirements and testing (ISO 19432:2006)   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   31/01/201 3   OJ C 350 – 15/11/2012
  2006/42/EC   CEN   EN ISO 19432:2012 Building construction machinery and equipment – Portable, hand-held, internal combustion engine driven cut-    off machines – Safety requirements (ISO 19432:2012)   C   15/11/2012   OJ C 350 – 15/11/2012     –       –   03/09/202 2   OJ L 72 –   03/03/2021
    2006/42/EC     CEN     EN ISO 19432-1:2020 Building construction machinery and equipment – Portable, hand-held, internal combustion engine-driven abrasive cutting machines – Part 1: Safety requirements for cut-off machines for centre-mounted rotating abrasive wheels (ISO 19432-1:2020)   C     03/03/2021   OJ L 72 –   03/03/2021     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN ISO 19472-2:2022   Machinery for forestry – Winches – Part 2: Traction aid winches (ISO 19472- 2:2022)   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
  2006/42/EC   CEN   EN ISO 19932-1:2013 Equipment for crop protection – Knapsack sprayers – Part 1: Safety and environmental requirements (ISO 19932-1:2013)   C   28/11/2013   OJ C 348 – 28/11/2013     –       –       –
  2006/42/EC   CEN   EN ISO 19932-2:2013   Equipment for crop protection –  Knapsack sprayers – Part 2: Test methods (ISO 19932-2:2013)   C   28/11/2013   OJ C 348 – 28/11/2013     –       –       –
  2006/42/EC   CEN   EN ISO 20361:2009   Liquid pumps and pump units – Noise test code – Grades 2 and 3 of accuracy (ISO 20361:2007)   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   09/09/201 6   OJ C 332 – 09/09/2016
  2006/42/EC   CEN   EN ISO 20361:2015   Liquid pumps and pump units – Noise test code – Grades 2 and 3 of accuracy (ISO 20361:2015)   C   09/09/2016   OJ C 332 – 09/09/2016     –       –   03/09/202 2   OJ L 72 –   03/03/2021
  2006/42/EC   CEN   EN ISO 20361:2019, EN ISO 20361:2019/A11:2020   Liquid pumps and pumps units – Noise test code – Grades 2 and 3 of accuracy  (ISO 20361:2019)   C   03/03/2021   OJ L 72 –   03/03/2021     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN ISO 20430:2020   Plastics and rubber machines – Injection moulding machines – Safety requirements (ISO 20430:2020)   C   15/10/2021   OJ L 366 –  15/10/2021     –       –       –
  2006/42/EC   CEN   EN ISO 21904-1:2020 Health and safety in welding and allied processes – Equipment for capture and  separation of welding fume – Part 1: General requirements (ISO 21904- 1:2020)   C   03/03/2021   OJ L 72 –   03/03/2021     –       –       –
  2006/42/EC   CEN   EN ISO 22291:2022   Safety requirements for wetlaid- nonwoven machinery (ISO 22291:2022)   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
  2006/42/EC   CEN   EN ISO 22867:2008 Forestry machinery – Vibration test code for portable hand-held machines with   internal combustion engine – Vibration at the handles (ISO 22867:2004, including Cor 1:2006)   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   30/06/201 2   OJ C 61 –  29/02/2012
  2006/42/EC   CEN   EN ISO 22867:2011 Forestry and gardening machinery – Vibration test code for portable hand- held machines with internal combustion engine – Vibration at the handles (ISO    22867:2011)   C   29/02/2012   OJ C 61 –  29/02/2012     –       –   02/02/202 5   OJ L 194 –  02/08/2023
  2006/42/EC   CEN   EN ISO 22867:2021 Forestry and gardening machinery – Vibration test code for portable hand- held machines with internal combustion engine – Vibration at the handles (ISO    22867:2021)   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN ISO 22868:2008 Forestry machinery – Noise test code for portable hand-held machines with internal combustion engine – Engineering method (Grade 2 accuracy) (ISO 22868:2005)   C   29/12/2009   OJ C 214 – 08/09/2009     –       –   30/09/201 1   OJ C 214 – 20/07/2011
  2006/42/EC   CEN   EN ISO 22868:2011 Forestry and gardening machinery – Noise test code for portable hand-held machines with internal combustion engine – Engineering method (Grade 2 accuracy) (ISO 22868:2011)   C   20/07/2011   OJ C 214 – 20/07/2011     –       –   11/10/202 3   OJ L 115 –  13/04/2022
  2006/42/EC   CEN   EN ISO 22868:2021 Forestry and gardening machinery – Noise test code for portable hand-held machines with internal combustion engine – Engineering method (Grade 2 accuracy) (ISO 22868:2021)   C   13/04/2022   OJ L 115 –  13/04/2022     –       –       –
  2006/42/EC   CEN   EN ISO 23062:2022 Foundry machinery – Safety    requirements for molding and coremaking machinery and associated equipment (ISO 23062:2022)   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
  2006/42/EC   CEN   EN ISO 23125:2010   Machine tools – Safety – Turning machines (ISO 23125:2010)   C   20/10/2010   OJ C 284 – 20/10/2010     –       –   31/10/201 2   OJ C 256 – 24/08/2012
  2006/42/EC   CEN   EN ISO 23125:2010, EN ISO 23125:2010/A1:2012   Machine tools – Safety – Turning machines (ISO 23125:2010)   C   24/08/2012   OJ C 256 – 24/08/2012     –       –   29/02/201 6   OJ C 14 –  15/01/2016
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN ISO 23125:2015   Machine tools – Safety – Turning machines (ISO 23125:2015, Corrected version 2016-03-15)   C   15/01/2016   OJ C 14 –  15/01/2016     –       –       –
  2006/42/EC   CEN   EN ISO 28139:2009 Agricultural and forestry machinery – Knapsack combustion-engine-driven mistblowers – Safety requirements (ISO 28139:2009)   C   29/12/2009   OJ C 309 – 18/12/2009     –       –       –
  2006/42/EC   CEN   EN ISO 28881:2013, EN ISO 28881:2013/AC:2013   Machine tools – Safety – Electro- discharge machines (ISO 28881:2013)   C   28/11/2013   OJ C 348 – 28/11/2013     –       –   02/02/202 5   OJ L 194 –  02/08/2023
  2006/42/EC   CEN   EN ISO 28881:2022   Machine tools – Safety – Electrical discharge machines (ISO 28881:2022)   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
  2006/42/EC   CEN   EN ISO 28927-1:2009 Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 1: Angle and vertical grinders (ISO 28927-1:2009)   C   26/05/2010   OJ C 136 – 26/05/2010     –       –   30/06/201 8   OJ C 92 –  09/03/2018
  2006/42/EC   CEN   EN ISO 28927-1:2009, EN ISO 28927- 1:2009/A1:2017 Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 1: Angle and vertical grinders (ISO 28927-1:2009)   C   09/03/2018   OJ C 92 –  09/03/2018     –       –   02/02/202 5   OJ L 194 –  02/08/2023
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN ISO 28927-1:2019 Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 1: Angle and vertical grinders (ISO 28927-1:2019)   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
  2006/42/EC   CEN   EN ISO 28927-2:2009 Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 2: Wrenches, nutrunners and screwdrivers (ISO 28927-2:2009)   C   26/05/2010   OJ C 136 – 26/05/2010     –       –   02/10/202 1   OJ L 102 –  02/04/2020
  2006/42/EC   CEN   EN ISO 28927-2:2009, EN ISO 28927- 2:2009/A1:2017 Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 2: Wrenches, nutrunners and screwdrivers (ISO 28927-2:2009)   C   19/03/2019   OJ L 75 –   19/03/2019     –       –       –
  2006/42/EC   CEN   EN ISO 28927-3:2009 Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 3: Polishers and rotary,   orbital and random orbital sanders (ISO 28927-3:2009)   C   26/05/2010   OJ C 136 – 26/05/2010     –       –       –
  2006/42/EC   CEN   EN ISO 28927-4:2010 Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 4: Straight grinders (ISO 28927-4:2010)   C   08/04/2011   OJ C 110 – 08/04/2011     –       –   02/04/202 0   OJ L 102 –  02/04/2020
  2006/42/EC   CEN   EN ISO 28927-4:2010, EN ISO 28927- 4:2010/A1:2018 Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 4: Straight grinders (ISO 28927-4:2010)   C   02/04/2020   OJ L 102 –  02/04/2020     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN ISO 28927-5:2009 Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 5: Drills and impact drills (ISO 28927-5:2009)   C   26/05/2010   OJ C 136 – 26/05/2010     –       –   31/03/201 6   OJ C 14 –  15/01/2016
  2006/42/EC   CEN   EN ISO 28927-5:2009, EN ISO 28927- 5:2009/A1:2015 Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 5: Drills and impact drills (ISO 28927-5:2009)   C   15/01/2016   OJ C 14 –  15/01/2016     –       –       –
  2006/42/EC   CEN   EN ISO 28927-6:2009 Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 6: Rammers (ISO 28927-6:2009)   C   26/05/2010   OJ C 136 – 26/05/2010     –       –       –
  2006/42/EC   CEN   EN ISO 28927-7:2009 Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 7: Nibblers and shears (ISO 28927-7:2009)   C   26/05/2010   OJ C 136 – 26/05/2010     –       –       –
  2006/42/EC   CEN   EN ISO 28927-8:2009 Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 8: Saws, polishing and filing machines with reciprocating action and saws with oscillating or  rotating action (ISO 28927-8:2009)   C   26/05/2010   OJ C 136 – 26/05/2010     –       –   30/06/201 6   OJ C 173 – 13/05/2016
  2006/42/EC   CEN   EN ISO 28927-8:2009, EN ISO 28927- 8:2009/A1:2015 Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 8: Saws, polishing and filing machines with reciprocating action and saws with oscillating or  rotating action (ISO 28927-8:2009)   C   13/05/2016   OJ C 173 – 13/05/2016     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   CEN   EN ISO 28927-9:2009 Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 9: Scaling hammers and needle scalers (ISO 28927-9:2009)   C   26/05/2010   OJ C 136 – 26/05/2010     –       –       –
  2006/42/EC   CEN   EN ISO 28927-10:2011 Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 10: Percussive drills, hammers and breakers (ISO 28927-  10:2011)   C   18/11/2011   OJ C 338 – 18/11/2011     –       –       –
  2006/42/EC   CEN   EN ISO 28927-11:2011 Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 11: Stone hammers (ISO 28927-11:2011)   C   20/07/2011   OJ C 214 – 20/07/2011     –       –       –
  2006/42/EC   CEN   EN ISO 28927-12:2012 Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 12: Die grinders (ISO 28927-12:2012)   C   05/04/2013   OJ C 99 –  05/04/2013     –       –       –
  2006/42/EC   CEN   EN ISO 28927-13:2022 Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 13: Fastener driving tools (ISO 28927-13:2022)   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
  2006/42/EC   CEN   EN ISO/IEC 80079-38:2016, EN ISO/IEC 80079- 38:2016/A1:2018 Explosive atmospheres – Part 38: Equipment and components in explosive atmospheres in underground mines (ISO/IEC 80079-38:2016)   C   19/03/2019   OJ L 75 –   19/03/2019     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   Cenelec   EN 60204-1:2006, EN 60204-1:2006/AC:2010, EN 60204-1:2006/A1:2009   Safety of machinery – Electrical equipment of machines – Part 1: General requirements   B   26/05/2010   OJ C 136 – 26/05/2010     –       –   02/10/202 1   OJ L 102 –  02/04/2020
  2006/42/EC   Cenelec   EN 60204-1:2018   Safety of machinery – Electrical equipment of machines – Part 1: General requirements   B   02/04/2020   OJ L 102 –  02/04/2020     –       –       –
  2006/42/EC   Cenelec   EN 60204-11:2000, EN 60204-11:2000/AC:2010 Safety of machinery – Electrical   equipment of machines – Part 11: Requirements for HV equipment for voltages above 1 000 V a.c. or 1 500 V d.c.  and not exceeding 36 kV   B   26/05/2010   OJ C 136 – 26/05/2010     –       –   02/10/202 1   OJ L 102 –  02/04/2020
  2006/42/EC   Cenelec   EN IEC 60204-11:2019 Safety of machinery – Electrical   equipment of machines – Part 11: Requirements for equipment for voltages above 1 000 V AC or 1 500 V DC and not exceeding 36 kV   B   02/04/2020   OJ L 102 –  02/04/2020     –       –       –
  2006/42/EC   Cenelec   EN 60204-32:2008   Safety of machinery – Electrical equipment of machines – Part 32: Requirements for hoisting machines   B   29/12/2009   OJ C 309 – 18/12/2009     –       –       –
  2006/42/EC   Cenelec   EN 60204-33:2011 Safety of machinery – Electrical   equipment of machines – Part 33: Requirements for semiconductor  fabrication equipment   B   18/11/2011   OJ C 338 – 18/11/2011     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   Cenelec   EN 61310-1:2008 Safety of machinery – Indication, marking and actuation – Part 1: Requirements for visual, acoustic and tactile signals   B   29/12/2009   OJ C 309 – 18/12/2009     –       –       –
  2006/42/EC   Cenelec   EN 61310-2:2008   Safety of machinery – Indication, marking and actuation – Part 2: Requirements for marking   B   29/12/2009   OJ C 309 – 18/12/2009     –       –       –
  2006/42/EC   Cenelec   EN 61310-3:2008 Safety of machinery – Indication, marking and actuation – Part 3: Requirements for the location and operation of actuators   B   29/12/2009   OJ C 309 – 18/12/2009     –       –       –
  2006/42/EC   Cenelec   EN 61496-1:2004, EN 61496-1:2004/AC:2010, EN 61496-1:2004/A1:2008   Safety of machinery – Electro-sensitive protective equipment – Part 1: General  requirements and tests   B   26/05/2010   OJ C 136 – 26/05/2010     –       –   10/05/201 5   OJ C 110 – 11/04/2014
  2006/42/EC   Cenelec   EN 61496-1:2013   Safety of machinery – Electro-sensitive protective equipment – Part 1: General  requirements and tests   B   11/04/2014   OJ C 110 – 11/04/2014     –       –   19/09/202 0   OJ L 286 –  07/11/2019
  2006/42/EC   Cenelec   EN 61800-5-2:2007   Adjustable speed electrical power drive   systems – Part 5-2: Safety requirements – Functional   B   29/12/2009   OJ C 309 – 18/12/2009     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   Cenelec   EN 62061:2005, EN 62061:2005/AC:2010 Safety of machinery – Functional safety of safety-related electrical, electronic and programmable electronic control systems   B   26/05/2010   OJ C 136 – 26/05/2010     –       –   18/12/201 5   OJ C 348 – 28/11/2013
  2006/42/EC   Cenelec   EN 62061:2005, EN 62061:2005/AC:2010, EN 62061:2005/A1:2013 Safety of machinery – Functional safety of safety-related electrical, electronic and programmable electronic control systems   B   28/11/2013   OJ C 348 – 28/11/2013     –       –   31/07/201 8   OJ C 14 –  15/01/2016
  2006/42/EC   Cenelec EN 62061:2005, EN 62061:2005/AC:2010, EN 62061:2005/A1:2013,  EN 62061:2005/A2:2015 Safety of machinery – Functional safety of safety-related electrical, electronic and programmable electronic control systems   B   15/01/2016   OJ C 14 –  15/01/2016     –       –   11/10/202 3   OJ L 115 –  13/04/2022
  2006/42/EC   Cenelec   EN IEC 62061:2021   Safety of machinery – Functional safety of safety-related control systems   B   13/04/2022   OJ L 115 –  13/04/2022     –       –       –
  2006/42/EC   Cenelec   EN 62745:2017, EN 62745:2017/A11:2020   Safety of machinery – Requirements for cableless control systems of machinery   B   03/03/2021   OJ L 72 –   03/03/2021     –       –       –
  2006/42/EC   Cenelec   EN 50223:2010   Stationary electrostatic application equipment for ignitable flock material – Safety requirements   C   20/10/2010   OJ C 284 – 20/10/2010     –       –   13/04/201 8   OJ C 14 –  15/01/2016
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   Cenelec   EN 50223:2015   Stationary electrostatic application equipment for ignitable flock material – Safety requirements   C   15/01/2016   OJ C 14 –  15/01/2016     –       –       –
  2006/42/EC   Cenelec   EN 50348:2010, EN 50348:2010/AC:2010   Stationary electrostatic application equipment for non-ignitable liquid coating material – Safety requirements   C   26/05/2010   OJ C 136 – 26/05/2010     –       –       –
  2006/42/EC   Cenelec   EN 50434:2014   Safety of household and similar appliances – Particular requirements for mains operated shredders and chippers   C   13/02/2015   OJ C 54 –  13/02/2015     –       –       –
  2006/42/EC   Cenelec   EN 50569:2013 Household and similar electrical appliances – Safety – Particular requirements for commercial electric spin extractors   C   11/04/2014   OJ C 110 – 11/04/2014     –       –   12/01/202 1   OJ L 75 –   19/03/2019
  2006/42/EC   Cenelec   EN 50569:2013, EN 50569:2013/A1:2018 Household and similar electrical appliances – Safety – Particular requirements for commercial electric spin extractors   C   19/03/2019   OJ L 75 –   19/03/2019     –       –       –
  2006/42/EC   Cenelec   EN 50570:2013 Household and similar electrical appliances – Safety – Particular requirements for commercial electric tumble dryers   C   11/04/2014   OJ C 110 – 11/04/2014     –       –   12/01/202 1   OJ L 75 –   19/03/2019
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   Cenelec   EN 50570:2013, EN 50570:2013/A1:2018 Household and similar electrical appliances – Safety – Particular requirements for commercial electric tumble dryers   C   19/03/2019   OJ L 75 –   19/03/2019     –       –       –
  2006/42/EC   Cenelec   EN 50571:2013 Household and similar electrical appliances – Safety – Particular requirements for commercial electric washing machines   C   11/04/2014   OJ C 110 – 11/04/2014     –       –   12/01/202 1   OJ L 75 –   19/03/2019
  2006/42/EC   Cenelec   EN 50571:2013, EN 50571:2013/A1:2018 Household and similar electrical appliances – Safety – Particular requirements for commercial electric washing machines   C   19/03/2019   OJ L 75 –   19/03/2019     –       –       –
  2006/42/EC   Cenelec   EN 50580:2012   Safety of hand-held electric motor operated tools – Particular requirements for spray guns   C   05/06/2012   OJ C 159 – 05/06/2012     –       –   22/07/201 6   OJ C 348 – 28/11/2013
  2006/42/EC   Cenelec   EN 50580:2012, EN 50580:2012/A1:2013   Safety of hand-held electric motor operated tools – Particular requirements for spray guns   C   28/11/2013   OJ C 348 – 28/11/2013     –       –       –
  2006/42/EC   Cenelec   EN 50636-2-91:2014 Household and similar electrical appliances – Safety – Part 2-91: Particular requirements for walk-behind and hand-held lawn trimmers and lawn   edge trimmers   C   13/02/2015   OJ C 54 –  13/02/2015     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   Cenelec   EN 50636-2-92:2014 Household and similar electrical appliances – Safety – Part 2-92: Particular requirements for pedestrian- controlled mains-operated lawn scarifiers and aerators   C   13/02/2015   OJ C 54 –  13/02/2015     –       –       –
  2006/42/EC   Cenelec   EN 50636-2-94:2014 Household and similar electrical appliances – Safety – Part 2-94: Particular requirements for scissors type grass shears   C   13/02/2015   OJ C 54 –  13/02/2015     –       –       –
  2006/42/EC   Cenelec   EN 50636-2-100:2014 Household and similar electrical appliances – Safety – Part 2-100: Particular requirements for hand-held mains-operated garden blowers, vacuums and blower vacuums   C   13/02/2015   OJ C 54 –  13/02/2015     –       –       –
  2006/42/EC   Cenelec   EN 50636-2-107:2015 Safety of household and similar appliances – Part 2-107: Particular requirements for robotic battery powered electrical lawnmowers   C   15/01/2016   OJ C 14 –  15/01/2016     –       –   12/01/202 0   OJ L 75 –   19/03/2019
  2006/42/EC   Cenelec   EN 50636-2-107:2015, EN 50636-2- 107:2015/A1:2018 Safety of household and similar appliances – Part 2-107: Particular requirements for robotic battery powered electrical lawnmowers   C   19/03/2019   OJ L 75 –   19/03/2019     –       –   03/09/202 2   OJ L 72 –   03/03/2021
  2006/42/EC   Cenelec EN 50636-2-107:2015, EN 50636-2- 107:2015/A1:2018, EN 50636-2- 107:2015/A2:2020 Safety of household and similar appliances – Part 2-107: Particular requirements for robotic battery powered electrical lawnmowers   C   03/03/2021   OJ L 72 –   03/03/2021     –       –   11/10/202 3   OJ L 115 –  13/04/2022
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
    2006/42/EC     Cenelec EN 50636-2-107:2015, EN 50636-2- 107:2015/A1:2018, EN 50636-2- 107:2015/A2:2020, EN 50636-2- 107:2015/A3:2021   Safety of household and similar appliances – Part 2-107: Particular requirements for robotic battery powered electrical lawnmowers   C     13/04/2022   OJ L 115 –  13/04/2022     –       –       –
  2006/42/EC   Cenelec   EN 60204-31:2013 Safety of machinery – Electrical   equipment of machines – Part 31: Particular safety and EMC requirements for sewing machines, units and systems   C   11/04/2014   OJ C 110 – 11/04/2014     –       –       –
      2006/42/EC       Cenelec EN 60335-1:2002, EN 60335-1:2002/AC:2009,  EN 60335-1:2002/AC:2010,  EN 60335-1:2002/A11:2004, EN 60335-1:2002/A1:2004,   EN 60335-1:2002/A12:2006, EN 60335-1:2002/A13:2008, EN 60335-1:2002/A14:2010, EN 60335- 1:2002/A12:2006/AC:2007, EN 60335- 1:2002/A1:2004/AC:2007       Household and similar electrical appliances – Safety – Part 1: General requirements       C       20/10/2010       OJ C 284 – 20/10/2010         –           –       02/05/201 4       OJ C 61 –  29/02/2012
        2006/42/EC         Cenelec EN 60335-1:2002, EN 60335-1:2002/AC:2009,  EN 60335-1:2002/AC:2010,  EN 60335-1:2002/A11:2004, EN 60335-1:2002/A1:2004,   EN 60335-1:2002/A12:2006, EN 60335-1:2002/A13:2008, EN 60335-1:2002/A14:2010, EN 60335- 1:2002/A12:2006/AC:2007, EN 60335- 1:2002/A1:2004/AC:2007,    EN 60335-1:2002/A15:2011       Household and similar electrical appliances – Safety – Part 1: General requirements       C         29/02/2012       OJ C 61 –  29/02/2012         –           –       21/11/201 4       OJ C 159 – 05/06/2012
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   Cenelec   EN 60335-1:2012, EN 60335-1:2012/AC:2014   Household and similar electrical appliances – Safety – Part 1: General requirements   C   05/06/2012   OJ C 159 – 05/06/2012     –       –   29/02/201 6   OJ C 14 –  15/01/2016
  2006/42/EC   Cenelec   EN 60335-1:2012, EN 60335-1:2012/AC:2014, EN 60335-1:2012/A11:2014   Household and similar electrical appliances – Safety – Part 1: General requirements   C   15/01/2016   OJ C 14 –  15/01/2016     –       –   03/05/202 0   OJ L 75 –   19/03/2019
  2006/42/EC   Cenelec EN 60335-1:2012, EN 60335-1:2012/AC:2014,  EN 60335-1:2012/A11:2014, EN 60335-1:2012/A13:2017   Household and similar electrical appliances – Safety – Part 1: General requirements   C   19/03/2019   OJ L 75 –   19/03/2019     –       –   11/10/202 3   OJ L 115 –  13/04/2022
  2006/42/EC   Cenelec EN 60335-1:2012, EN 60335-1:2012/AC:2014,  EN 60335-1:2012/A11:2014, EN 60335-1:2012/A13:2017, EN 60335-1:2012/A15:2021   Household and similar electrical appliances – Safety – Part 1: General requirements   C   13/04/2022   OJ L 115 –  13/04/2022     –       –       –
  2006/42/EC   Cenelec   EN 60335-2-8:2015 Household and similar electrical appliances – Safety – Part 2-8: Particular requirements for shavers, hair clippers and similar appliances   C   13/05/2016   OJ C 173 – 13/05/2016     –       –   28/12/201 8   OJ C 332 – 09/09/2016
  2006/42/EC   Cenelec   EN 60335-2-8:2015, EN 60335-2-8:2015/A1:2016 Household and similar electrical appliances – Safety – Part 2-8: Particular requirements for shavers, hair clippers and similar appliances   C   09/09/2016   OJ C 332 – 09/09/2016     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   Cenelec   EN 60335-2-23:2003, EN 60335-2-23:2003/A2:2015 Household and similar electrical appliances – Safety – Part 2-23: Particular requirements for appliances for skin or hair care   C   15/01/2016   OJ C 14 –  15/01/2016     –       –       –
  2006/42/EC   Cenelec EN 60335-2-36:2002, EN 60335-2- 36:2002/A11:2012, EN 60335-2-36:2002/AC:2007 Household and similar electrical appliances – Safety – Part 2-36: Particular requirements for commercial   electric cooking ranges, ovens, hobs and hob elements   C   05/04/2013   OJ C 99 –  05/04/2013     –       –       –
  2006/42/EC   Cenelec EN 60335-2-37:2002, EN 60335-2- 37:2002/A11:2012, EN 60335-2-37:2002/AC:2007 Household and similar electrical appliances – Safety – Part 2-37: Particular requirements for commercial electric deep fat fryers   C   05/04/2013   OJ C 99 –  05/04/2013     –       –   25/01/201 9   OJ C 332 – 09/09/2016
    2006/42/EC     Cenelec EN 60335-2-37:2002, EN 60335-2- 37:2002/A11:2012, EN 60335-2- 37:2002/AC:2007, EN 60335-2- 37:2002/A12:2016   Household and similar electrical appliances – Safety – Part 2-37: Particular requirements for commercial electric deep fat fryers   C     09/09/2016   OJ C 332 – 09/09/2016     –       –       –
        2006/42/EC         Cenelec EN 60335-2-40:2003, EN 60335-2- 40:2003/A11:2004, EN 60335-2- 40:2003/A12:2005, EN 60335-2-40:2003/A1:2006, EN 60335-2- 40:2003/A13:2012/AC:2013, EN 60335-2- 40:2003/A13:2012, EN 60335-2-40:2003/A2:2009, EN 60335-2- 40:2003/AC:2006, EN 60335-2-40:2003/AC:2010       Household and similar electrical appliances – Safety – Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers         C         28/11/2013         OJ C 348 – 28/11/2013         –           –           –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   Cenelec   EN IEC 60335-2-41:2021, EN IEC 60335-2- 41:2021/A11:2021   Household and similar electrical appliances – Safety – Particular    requirements for pumps   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
  2006/42/EC   Cenelec EN 60335-2-42:2003, EN 60335-2- 42:2003/A11:2012, EN 60335-2-42:2003/AC:2007 Household and similar electrical appliances – Safety – Part 2-42: Particular requirements for commercial electric forced convection ovens, steam cookers and steam-convection ovens   C   05/04/2013   OJ C 99 –  05/04/2013     –       –       –
  2006/42/EC   Cenelec EN 60335-2-47:2003, EN 60335-2- 47:2003/A11:2012, EN 60335-2-47:2003/AC:2007 Household and similar electrical appliances – Safety – Part 2-47: Particular requirements for commercial electric boiling pans   C   05/04/2013   OJ C 99 –  05/04/2013     –       –       –
  2006/42/EC   Cenelec EN 60335-2-48:2003, EN 60335-2- 48:2003/A11:2012, EN 60335-2-48:2003/AC:2007 Household and similar electrical appliances – Safety – Part 2-48: Particular requirements for commercial electric grillers and toasters   C   05/04/2013   OJ C 99 –  05/04/2013     –       –       –
  2006/42/EC   Cenelec EN 60335-2-49:2003, EN 60335-2- 49:2003/A11:2012, EN 60335-2-49:2003/AC:2007 Household and similar electrical appliances – Safety – Part 2-49: Particular requirements for commercial  electric appliances for keeping food and crockery warm   C   05/04/2013   OJ C 99 –  05/04/2013     –       –       –
  2006/42/EC   Cenelec EN 60335-2-58:2005, EN 60335-2- 58:2005/A12:2016, EN 60335-2-58:2005/A2:2015 Household and similar electrical appliances – Safety – Part 2-58: Particular requirements for commercial electric dishwashing machines   C   19/03/2019   OJ L 75 –   19/03/2019     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   Cenelec   EN 60335-2-65:2003, EN 60335-2- 65:2003/A11:2012 Household and similar electrical appliances – Safety – Part 2-65: Particular requirements for air-cleaning appliances   C   05/04/2013   OJ C 99 –  05/04/2013     –       –       –
  2006/42/EC   Cenelec   EN 60335-2-67:2009 Household and similar electrical appliances – Safety – Part 2-67: Particular requirements for floor treatment and floor cleaning machines for commercial use   C   29/12/2009   OJ C 309 – 18/12/2009     –       –   03/05/201 5   OJ C 350 – 15/11/2012
  2006/42/EC   Cenelec   EN 60335-2-67:2012 Household and similar electrical appliances – Safety – Part 2-67:   Particular requirements for floor treatment machines for commercial use   C   15/11/2012   OJ C 350 – 15/11/2012     –       –       –
  2006/42/EC   Cenelec   EN 60335-2-68:2009 Household and similar electrical  appliances – Safety – Part 2-68:    Particular requirements for spray extraction machines for commercial use   C   29/12/2009   OJ C 309 – 18/12/2009     –       –   03/05/201 5   OJ C 350 – 15/11/2012
  2006/42/EC   Cenelec   EN 60335-2-68:2012 Household and similar electrical  appliances – Safety – Part 2-68:    Particular requirements for spray extraction machines, for commercial use   C   15/11/2012   OJ C 350 – 15/11/2012     –       –       –
  2006/42/EC   Cenelec   EN 60335-2-69:2009 Household and similar electrical appliances – Safety – Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush, for commercial use   C   29/12/2009   OJ C 309 – 18/12/2009     –       –   28/03/201 5   OJ C 350 – 15/11/2012
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   Cenelec   EN 60335-2-69:2012 Household and similar electrical appliances – Safety – Part 2-69: Particular requirements for wet and dry   vacuum cleaners, including power brush for commercial use   C   15/11/2012   OJ C 350 – 15/11/2012     –       –       –
  2006/42/EC   Cenelec   EN 60335-2-72:2009 Household and similar electrical appliances – Safety – Part 2-72: Particular requirements for automatic machines for floor treatment for commercial use   C   29/12/2009   OJ C 309 – 18/12/2009     –       –   03/05/201 5   OJ C 350 – 15/11/2012
  2006/42/EC   Cenelec   EN 60335-2-72:2012 Household and similar electrical appliances – Safety – Part 2-72: Particular requirements for floor treatment machines with or without traction drive, for commercial use   C   15/11/2012   OJ C 350 – 15/11/2012     –       –       –
  2006/42/EC   Cenelec   EN 60335-2-77:2010 Safety of household and similar appliances – Part 2-77: Particular requirements for pedestrian-controlled  walk-behind electrically powered lawn mowers   C   08/04/2011   OJ C 110 – 08/04/2011     –       –   02/02/202 5   OJ L 194 –  02/08/2023
  2006/42/EC   Cenelec   EN 60335-2-79:2009 Household and similar electrical appliances – Safety – Part 2-79: Particular requirements for high pressure cleaners and steam cleaners   C   29/12/2009   OJ C 309 – 18/12/2009     –       –   03/04/201 5   OJ C 350 – 15/11/2012
  2006/42/EC   Cenelec   EN 60335-2-79:2012 Household and similar electrical appliances – Safety – Part 2-79: Particular requirements for high pressure cleaners and steam cleaners   C   15/11/2012   OJ C 350 – 15/11/2012     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   Cenelec   EN 60335-2-89:2010, EN 60335-2-89:2010/A1:2016 Household and similar electrical appliances – Safety – Part 2-89: Particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant condensing unit or compressor   C   09/09/2016   OJ C 332 – 09/09/2016     –       –   03/07/202 0   OJ C 92 –  09/03/2018
  2006/42/EC   Cenelec   EN 60335-2-89:2010, EN 60335-2-89:2010/A1:2016, EN 60335-2-89:2010/A2:2017 Household and similar electrical appliances – Safety – Part 2-89: Particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant condensing unit or compressor   C   09/03/2018   OJ C 92 –  09/03/2018     –       –   02/02/202 5   OJ L 194 –  02/08/2023
  2006/42/EC   Cenelec   EN IEC 60335-2-89:2022, EN IEC 60335-2- 89:2022/A11:2022 Household and similar electrical appliances – Safety – Part 2-89: Particular requirements for commercial refrigerating appliances and ice-makers with an incorporated or remote refrigerant unit or motor-compressor   C   02/08/2023   OJ L 194 –  02/08/2023     –       –   15/05/202 4   OJ L, 2024/1329 – 15/05/2024
  2006/42/EC   Cenelec EN IEC 60335-2-89:2022, EN IEC 60335-2- 89:2022/A11:2022, EN IEC 60335-2- 89:2022/AC:2023-11 Household and similar electrical appliances – Safety – Part 2-89: Particular requirements for commercial refrigerating appliances and ice-makers with an incorporated or remote refrigerant unit or motor-compressor   C   15/05/2024   OJ L, 2024/1329 – 15/05/2024     –       –       –
  2006/42/EC   Cenelec   EN 60335-2-95:2015, EN 60335-2-95:2015/A1:2015 Household and similar electrical appliances – Safety – Part 2-95: Particular requirements for drives for vertically moving garage doors for residential use   C   15/01/2016   OJ C 14 –  15/01/2016     –       –       –
  2006/42/EC   Cenelec   EN 60335-2-97:2006, EN 60335-2- 97:2006/A12:2015 Household and similar electrical appliances – Safety – Part 2-97: Particular requirements for drives for rolling shutters, awnings, blinds and   similar equipment   C   15/01/2016   OJ C 14 –  15/01/2016     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   Cenelec   EN 60335-2-102:2016 Household and similar electrical appliances – Safety – Part 2-102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections   C   09/09/2016   OJ C 332 – 09/09/2016     –       –       –
  2006/42/EC   Cenelec   EN 60335-2-103:2015 Household and similar electrical appliances – Safety – Part 2-103: Particular requirements for drives for gates, doors and windows   C   15/01/2016   OJ C 14 –  15/01/2016     –       –       –
  2006/42/EC   Cenelec   EN IEC 60335-2-119:2024, EN IEC 60335-2- 119:2024/A11:2024 Household and similar electrical appliances – Safety – Part 2-119: Particular requirements for commercial vacuum packaging appliances   C   15/05/2024   OJ L, 2024/1329 – 15/05/2024     –       –       –
  2006/42/EC   Cenelec   EN 60519-1:2015   Safety in installations for electroheating and electromagnetic processing – Part 1: General requirements   C   15/01/2016   OJ C 14 –  15/01/2016     –       –       –
  2006/42/EC   Cenelec   EN 60745-1:2009, EN 60745-1:2009/AC:2009   Hand-held motor-operated electric tools – Safety – Part 1: General requirements   C   29/12/2009   OJ C 309 – 18/12/2009     –       –   01/10/201 3   OJ C 110 – 08/04/2011
  2006/42/EC   Cenelec   EN 60745-1:2009, EN 60745-1:2009/AC:2009, EN 60745-1:2009/A11:2010   Hand-held motor-operated electric tools – Safety – Part 1: General requirements   C   08/04/2011   OJ C 110 – 08/04/2011     –       –   15/12/202 1   OJ C 14 –  15/01/2016
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   Cenelec   EN 60745-2-1:2010   Hand-held motor-operated electric tools – Safety – Part 2-1: Particular requirements for drills and impact drills   C   20/10/2010   OJ C 284 – 20/10/2010     –       –   19/01/202 2   OJ L 286 –  07/11/2019
  2006/42/EC   Cenelec   EN 60745-2-2:2010 Hand-held motor-operated electric tools – Safety – Part 2-2: Particular requirements for screwdrivers and impact wrenches   C   20/10/2010   OJ C 284 – 20/10/2010     –       –   21/08/201 9   OJ C 14 –  15/01/2016
  2006/42/EC   Cenelec   EN 60745-2-3:2011 Hand-held motor-operated electric tools – Safety – Part 2-3: Particular requirements for grinders, polishers and disk-type sanders   C   18/11/2011   OJ C 338 – 18/11/2011     –       –   25/02/201 6   OJ C 348 – 28/11/2013
  2006/42/EC   Cenelec   EN 60745-2-3:2011, EN 60745-2-3:2011/A2:2013 Hand-held motor-operated electric tools – Safety – Part 2-3: Particular requirements for grinders, polishers and disk-type sanders   C   28/11/2013   OJ C 348 – 28/11/2013     –       –   21/04/201 6   OJ C 54 –  13/02/2015
  2006/42/EC   Cenelec   EN 60745-2-3:2011, EN 60745-2-3:2011/A2:2013,  EN 60745-2-3:2011/A11:2014 Hand-held motor-operated electric tools – Safety – Part 2-3: Particular requirements for grinders, polishers and disk-type sanders   C   13/02/2015   OJ C 54 –  13/02/2015     –       –   17/11/201 7   OJ C 14 –  15/01/2016
  2006/42/EC   Cenelec EN 60745-2-3:2011, EN 60745-2-3:2011/A2:2013,   EN 60745-2-3:2011/A11:2014, EN 60745-2-3:2011/A12:2014 Hand-held motor-operated electric tools – Safety – Part 2-3: Particular requirements for grinders, polishers and disk-type sanders   C   15/01/2016   OJ C 14 –  15/01/2016     –       –   28/09/201 8   OJ C 173 – 13/05/2016
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   Cenelec EN 60745-2-3:2011, EN 60745-2-3:2011/A2:2013,   EN 60745-2-3:2011/A11:2014, EN 60745-2-3:2011/A12:2014, EN 60745-2-3:2011/A13:2015 Hand-held motor-operated electric tools – Safety – Part 2-3: Particular requirements for grinders, polishers and disk-type sanders   C   13/05/2016   OJ C 173 – 13/05/2016     –       –   02/02/202 5   OJ L 194 –  02/08/2023
  2006/42/EC   Cenelec   EN 60745-2-4:2009 Hand-held motor-operated electric tools – Safety – Part 2-4: Particular requirements for sanders and polishers other than disk type   C   26/05/2010   OJ C 136 – 26/05/2010     –       –   01/06/201 3   OJ C 61 –  29/02/2012
  2006/42/EC   Cenelec   EN 60745-2-4:2009, EN 60745-2-4:2009/A11:2011 Hand-held motor-operated electric tools – Safety – Part 2-4: Particular requirements for sanders and polishers other than disk type   C   29/02/2012   OJ C 61 –  29/02/2012     –       –   21/08/201 9   OJ C 14 –  15/01/2016
  2006/42/EC   Cenelec   EN 60745-2-5:2010   Hand-held motor-operated electric tools – Safety – Part 2-5: Particular   requirements for circular saws   C   08/04/2011   OJ C 110 – 08/04/2011     –       –   21/08/201 9   OJ C 14 –  15/01/2016
  2006/42/EC   Cenelec   EN 60745-2-6:2010   Hand-held motor-operated electric tools – Safety – Part 2-6: Particular requirements for hammers   C   20/10/2010   OJ C 284 – 20/10/2010     –       –   15/04/202 3   OJ L 366 –  15/10/2021
  2006/42/EC   Cenelec   EN 60745-2-8:2009   Hand-held motor-operated electric tools – Safety – Part 2-8: Particular requirements for shears and nibblers   C   29/12/2009   OJ C 309 – 18/12/2009     –       –   02/05/202 0   OJ C 183 – 09/06/2017
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   Cenelec   EN 60745-2-9:2009   Hand-held motor-operated electric tools – Safety – Part 2-9: Particular requirements for tappers   C   29/12/2009   OJ C 309 – 18/12/2009     –       –   21/08/201 9   OJ C 14 –  15/01/2016
  2006/42/EC   Cenelec   EN 60745-2-11:2010 Hand-held motor-operated electric tools – Safety – Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws)   C   20/10/2010   OJ C 284 – 20/10/2010     –       –   23/12/201 9   OJ C 332 – 09/09/2016
  2006/42/EC   Cenelec   EN 60745-2-12:2009   Hand-held motor-operated electric tools – Safety – Part 2-12: Particular requirements for concrete vibrators   C   29/12/2009   OJ C 309 – 18/12/2009     –       –       –
  2006/42/EC   Cenelec   EN 60745-2-13:2009   Hand-held motor-operated electric tools – Safety – Part 2-13: Particular requirements for chain saws   C   29/12/2009   OJ C 309 – 18/12/2009     –       –   01/12/201 3   OJ C 214 – 20/07/2011
  2006/42/EC   Cenelec   EN 60745-2-13:2009, EN 60745-2-13:2009/A1:2010   Hand-held motor-operated electric tools – Safety – Part 2-13: Particular requirements for chain saws   C   20/07/2011   OJ C 214 – 20/07/2011     –       –   03/05/202 3   OJ L 366 –  15/10/2021
  2006/42/EC   Cenelec   EN 60745-2-14:2009   Hand-held motor-operated electric tools – Safety – Part 2-14: Particular requirements for planers   C   29/12/2009   OJ C 309 – 18/12/2009     –       –   01/06/201 3   OJ C 110 – 08/04/2011
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   Cenelec   EN 60745-2-14:2009, EN 60745-2-14:2009/A2:2010   Hand-held motor-operated electric tools – Safety – Part 2-14: Particular requirements for planers   C   08/04/2011   OJ C 110 – 08/04/2011     –       –   31/08/201 9   OJ C 173 – 13/05/2016
  2006/42/EC   Cenelec   EN 60745-2-15:2009   Hand-held motor-operated electric tools – Safety – Part 2-15: Particular requirements for hedge trimmers   C   29/12/2009   OJ C 309 – 18/12/2009     –       –   28/11/201 3   OJ C 348 – 28/11/2013
  2006/42/EC   Cenelec   EN 60745-2-15:2009, EN 60745-2-15:2009/A1:2010   Hand-held motor-operated electric tools – Safety – Part 2-15: Particular requirements for hedge trimmers   C   28/11/2013   OJ C 348 – 28/11/2013     –       –   02/02/202 5   OJ L 194 –  02/08/2023
  2006/42/EC   Cenelec   EN 60745-2-16:2010   Hand-held motor-operated electric tools – Safety – Part 2-16: Particular requirements for tackers   C   08/04/2011   OJ C 110 – 08/04/2011     –       –       –
  2006/42/EC   Cenelec   EN 60745-2-17:2010   Hand-held motor-operated electric tools – Safety – Part 2-17: Particular requirements for routers and trimmers   C   08/04/2011   OJ C 110 – 08/04/2011     –       –   15/12/202 1   OJ L 286 –  07/11/2019
  2006/42/EC   Cenelec   EN 60745-2-18:2009   Hand-held motor-operated electric tools – Safety – Part 2-18: Particular    requirements for strapping tools   C   29/12/2009   OJ C 309 – 18/12/2009     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   Cenelec   EN 60745-2-19:2009   Hand-held motor-operated electric tools – Safety – Part 2-19: Particular requirements for jointers   C   29/12/2009   OJ C 309 – 18/12/2009     –       –   01/06/201 3   OJ C 110 – 08/04/2011
  2006/42/EC   Cenelec   EN 60745-2-19:2009, EN 60745-2-19:2009/A1:2010   Hand-held motor-operated electric tools – Safety – Part 2-19: Particular requirements for jointers   C   08/04/2011   OJ C 110 – 08/04/2011     –       –       –
  2006/42/EC   Cenelec   EN 60745-2-20:2009   Hand-held motor-operated electric tools – Safety – Part 2-20: Particular requirements for band saws   C   29/12/2009   OJ C 309 – 18/12/2009     –       –       –
  2006/42/EC   Cenelec   EN 60745-2-21:2009   Hand-held motor-operated electric tools – Safety – Part 2-21: Particular   requirements for drain cleaners   C   29/12/2009   OJ C 309 – 18/12/2009     –       –   01/12/201 3   OJ C 214 – 20/07/2011
  2006/42/EC   Cenelec   EN 60745-2-21:2009, EN 60745-2-21:2009/A1:2010   Hand-held motor-operated electric tools – Safety – Part 2-21: Particular   requirements for drain cleaners   C   20/07/2011   OJ C 214 – 20/07/2011     –       –   02/10/202 1   OJ L 102 –  02/04/2020
  2006/42/EC   Cenelec   EN 60745-2-22:2011   Hand-held motor-operated electric tools – Safety – Part 2-22: Particular requirements for cut-off machines   C   18/11/2011   OJ C 338 – 18/11/2011     –       –   17/12/201 5   OJ C 348 – 28/11/2013
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   Cenelec   EN 60745-2-22:2011, EN 60745-2- 22:2011/A11:2013   Hand-held motor-operated electric tools – Safety – Part 2-22: Particular requirements for cut-off machines   C   28/11/2013   OJ C 348 – 28/11/2013     –       –       –
  2006/42/EC   Cenelec   EN 60745-2-23:2013 Hand-held motor-operated electric tools – Safety – Part 2-23: Particular requirements for die grinders and small rotary tools   C   28/11/2013   OJ C 348 – 28/11/2013     –       –       –
  2006/42/EC   Cenelec   EN 60947-5-3:2013 Low-voltage switchgear and controlgear – Part 5-3: Control circuit devices and switching elements – Requirements for proximity devices with defined behaviour under fault conditions (PDDB)   C   11/04/2014   OJ C 110 – 11/04/2014     –       –       –
  2006/42/EC   Cenelec   EN 60947-5-5:1997, EN 60947-5-5:1997/A1:2005,  EN 60947-5-5:1997/A11:2013 Low-voltage switchgear and controlgear – Part 5-5: Control circuit devices and switching elements – Electrical emergency stop device with mechanical latching function   C   28/11/2013   OJ C 348 – 28/11/2013     –       –   24/02/202 0   OJ C 183 – 09/06/2017
  2006/42/EC   Cenelec EN 60947-5-5:1997, EN 60947-5-5:1997/A1:2005,   EN 60947-5-5:1997/A11:2013, EN 60947-5-5:1997/A2:2017 Low-voltage switchgear and controlgear – Part 5-5: Control circuit devices and switching elements – Electrical emergency stop device with mechanical latching function   C   09/06/2017   OJ C 183 – 09/06/2017     –       –       –
  2006/42/EC   Cenelec   EN 61029-1:2009   Safety of transportable motor-operated electric tools – Part 1: General requirements   C   29/12/2009   OJ C 309 – 18/12/2009     –       –   01/11/201 3   OJ C 110 – 08/04/2011
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   Cenelec   EN 61029-1:2009, EN 61029-1:2009/AC:2009, EN 61029-1:2009/A11:2010   Safety of transportable motor-operated electric tools – Part 1: General requirements   C   08/04/2011   OJ C 110 – 08/04/2011     –       –   15/12/202 1   OJ C 14 –  15/01/2016
  2006/42/EC   Cenelec   EN 61029-2-1:2010   Safety of transportable motor-operated electric tools – Part 2-1: Particular requirements for circular saw benches   C   20/10/2010   OJ C 284 – 20/10/2010     –       –   03/09/201 5   OJ C 99 –  05/04/2013
  2006/42/EC   Cenelec   EN 61029-2-1:2012   Safety of transportable motor-operated electric tools – Part 2-1: Particular requirements for circular saw benches   C   05/04/2013   OJ C 99 –  05/04/2013     –       –   21/08/201 9   OJ C 14 –  15/01/2016
  2006/42/EC   Cenelec   EN 61029-2-3:2011 Safety of transportable motor-operated electric tools – Part 2-3: Particular requirements for planers and thicknessers   C   18/11/2011   OJ C 338 – 18/11/2011     –       –       –
  2006/42/EC   Cenelec   EN 61029-2-4:2011   Safety of transportable motor-operated electric tools – Part 2-4: Particular requirements for bench grinders   C   18/11/2011   OJ C 338 – 18/11/2011     –       –   24/06/202 0   OJ L 286 –  07/11/2019
  2006/42/EC   Cenelec   EN 61029-2-5:2011, EN 61029-2-5:2011/A11:2015   Safety of transportable motor-operated electric tools – Part 2-5: Particular requirements for band saws   C   15/01/2016   OJ C 14 –  15/01/2016     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   Cenelec   EN 61029-2-6:2010 Safety of transportable motor-operated electric tools – Part 2-6: Particular requirements for diamond drills with water supply   C   20/10/2010   OJ C 284 – 20/10/2010     –       –   21/08/201 9   OJ C 14 –  15/01/2016
  2006/42/EC   Cenelec   EN 61029-2-8:2010 Safety of transportable motor-operated electric tools – Part 2-8: Particular requirements for single spindle vertical moulders   C   20/10/2010   OJ C 284 – 20/10/2010     –       –       –
  2006/42/EC   Cenelec   EN 61029-2-9:2009   Safety of transportable motor-operated electric tools – Part 2-9: Particular requirements for mitre saws   C   29/12/2009   OJ C 309 – 18/12/2009     –       –   03/09/201 5   OJ C 99 –  05/04/2013
  2006/42/EC   Cenelec   EN 61029-2-9:2012   Safety of transportable motor-operated electric tools – Part 2-9: Particular requirements for mitre saws   C   05/04/2013   OJ C 99 –  05/04/2013     –       –   12/08/201 6   OJ C 348 – 28/11/2013
  2006/42/EC   Cenelec   EN 61029-2-9:2012, EN 61029-2-9:2012/A11:2013   Safety of transportable motor-operated electric tools – Part 2-9: Particular requirements for mitre saws   C   28/11/2013   OJ C 348 – 28/11/2013     –       –   15/11/201 9   OJ C 173 – 13/05/2016
  2006/42/EC   Cenelec   EN 61029-2-10:2010   Safety of transportable motor-operated electric tools – Part 2-10: Particular requirements for cutting-off grinders   C   20/10/2010   OJ C 284 – 20/10/2010     –       –   22/07/201 6   OJ C 348 – 28/11/2013
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   Cenelec   EN 61029-2-10:2010, EN 61029-2- 10:2010/A11:2013   Safety of transportable motor-operated electric tools – Part 2-10: Particular requirements for cutting-off grinders   C   28/11/2013   OJ C 348 – 28/11/2013     –       –   19/10/201 9   OJ C 173 – 13/05/2016
  2006/42/EC   Cenelec   EN 61029-2-11:2009 Safety of transportable motor-operated electric tools – Part 2-11: Particular requirements for combined mitre and bench saws   C   29/12/2009   OJ C 309 – 18/12/2009     –       –   03/09/201 5   OJ C 99 –  05/04/2013
  2006/42/EC   Cenelec   EN 61029-2-11:2012 Safety of transportable motor-operated electric tools – Part 2-11: Particular requirements for combined mitre and bench saws   C   05/04/2013   OJ C 99 –  05/04/2013     –       –   12/08/201 6   OJ C 348 – 28/11/2013
  2006/42/EC   Cenelec   EN 61029-2-11:2012, EN 61029-2- 11:2012/A11:2013 Safety of transportable motor-operated electric tools – Part 2-11: Particular requirements for combined mitre and bench saws   C   28/11/2013   OJ C 348 – 28/11/2013     –       –       –
  2006/42/EC   Cenelec   EN 61029-2-12:2011   Safety of transportable motor-operated electric tools – Part 2-12: Particular requirements for threading machines   C   18/11/2011   OJ C 338 – 18/11/2011     –       –       –
      2006/42/EC       Cenelec       EN 62841-1:2015, EN 62841-1:2015/AC:2015     Electric motor-operated hand-held tools, transportable tools and lawn and garden  machinery – Safety – Part 1: General requirements       C       15/01/2016       OJ C 14 –  15/01/2016 Restriction: This harmonised standard does not confer a presumption of conformity with the essential health and safety requirements set out in point 1.2.3. (second paragraph, first indent, applied with the first paragraph) and point 2.2.1. (first paragraph, third indent) of Annex I to Directive 2006/42/EC, which require  sufficient protection against       30/04/2024       OJ L, 2024/1256 – 30/04/2024       02/02/202 5       OJ L, 2024/1256 – 30/04/2024
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
              unintentional starting regardless of the cause.        
        2006/42/EC         Cenelec       EN 62841-1:2015, EN 62841-1:2015/AC:2015, EN 62841-1:2015/A11:2022       Electric motor-operated hand-held tools, transportable tools and lawn and garden  machinery – Safety – Part 1: General requirements         C         02/08/2023         OJ L 194 –  02/08/2023 Restriction: This harmonised standard does not confer a presumption of conformity with the essential health and safety requirements set out in point 1.2.3. (second paragraph, first indent, applied with the first paragraph) and point 2.2.1. (first paragraph, third indent) of Annex I to Directive 2006/42/EC, which require sufficient protection against unintentional starting regardless of the cause.         30/04/2024       OJ L, 2024/1256 – 30/04/2024           –
  2006/42/EC   Cenelec   EN 62841-2-1:2018 Electric motor-operated hand-held tools, transportable tools and lawn and garden  machinery – Safety – Part 2-1: Particular  requirements for hand-held drills and impact drills   C   19/03/2019   OJ L 75 –   19/03/2019     –       –   02/10/202 1   OJ L 102 –  02/04/2020
  2006/42/EC   Cenelec   EN 62841-2-1:2018, EN 62841-2-1:2018/A11:2019 Electric motor-operated hand-held tools, transportable tools and lawn and garden  machinery – Safety – Part 2-1: Particular  requirements for hand-held drills and impact drills   C   02/10/2021   OJ L 102 –  02/04/2020     –       –   02/02/202 5   OJ L 194 –  02/08/2023
  2006/42/EC   Cenelec EN 62841-2-1:2018, EN 62841-2-1:2018/A11:2019, EN 62841-2-1:2018/A12:2022, EN 62841-2-1:2018/A1:2022 Electric motor-operated hand-held tools, transportable tools and lawn and garden  machinery – Safety – Part 2-1: Particular  requirements for hand-held drills and impact drills   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   Cenelec   EN 62841-2-2:2014, EN 62841-2-2:2014/AC:2015 Electric motor-operated hand-held tools, transportable tools and lawn and garden  machinery – Safety – Part 2-2: Particular  requirements for hand-held screwdrivers and impact wrenches (IEC 62841-2- 2:2014, modified)   C   15/01/2016   OJ C 14 –  15/01/2016     –       –       –
  2006/42/EC   Cenelec   EN IEC 62841-2-3:2021, EN IEC 62841-2- 3:2021/A11:2021 Electric motor-operated hand-held tools, transportable tools and lawn and garden  machinery – Safety – Part 2-3: Particular  requirements for hand-held grinders, disc-type polishers and disc-type sanders   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
  2006/42/EC   Cenelec   EN 62841-2-4:2014, EN 62841-2-4:2014/AC:2015 Electric motor-operated hand-held tools, transportable tools and lawn and garden  machinery – Safety – Part 2-4: Particular  requirements for hand-held sanders and   polishers other than disc type (IEC 62841-2-4:2014, modified)   C   15/01/2016   OJ C 14 –  15/01/2016     –       –       –
  2006/42/EC   Cenelec   EN 62841-2-5:2014 Electric motor-operated hand-held tools, transportable tools and lawn and garden  machinery – Safety – Part 2-5: Particular  requirements for hand-held circular saws (IEC 62841-2-5:2014, modified)   C   15/01/2016   OJ C 14 –  15/01/2016     –       –       –
  2006/42/EC   Cenelec   EN IEC 62841-2-6:2020, EN IEC 62841-2- 6:2020/A11:2020 Electric motor-operated hand-held tools, transportable tools and lawn and garden  machinery – Safety – Part 2-6: Particular  requirements for hand-held hammers   C   15/10/2021   OJ L 366 –  15/10/2021     –       –       –
  2006/42/EC   Cenelec   EN 62841-2-8:2016 Electric motor-operated hand-held tools, transportable tools and lawn and garden  machinery – Safety – Part 2-8: Particular  requirements for hand-held shears and nibblers   C   09/06/2017   OJ C 183 – 09/06/2017     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   Cenelec   EN 62841-2-9:2015, EN 62841-2-9:2015/AC:2016- 10 Electric motor-operated hand-held tools, transportable tools and lawn and garden  machinery – Safety – Part 2-9: Particular  requirements for hand-held tappers and   threaders   C   15/01/2016   OJ C 14 –  15/01/2016     –       –       –
  2006/42/EC   Cenelec   EN 62841-2-10:2017 Electric motor-operated hand-held tools, transportable tools and lawn and garden  machinery – Safety – Part 2-10: Particular requirements for hand-held mixers   C   09/03/2018   OJ C 92 –  09/03/2018     –       –       –
  2006/42/EC   Cenelec   EN 62841-2-11:2016 Electric motor-operated hand-held tools, transportable tools and lawn and garden  machinery – Safety – Part 2-11: Particular requirements for hand-held reciprocating saws   C   09/09/2016   OJ C 332 – 09/09/2016     –       –   03/09/202 2   OJ L 72 –   03/03/2021
        2006/42/EC         Cenelec         EN 62841-2-11:2016, EN 62841-2-11:2016/A1:2020       Electric motor-operated hand-held tools, transportable tools and lawn and garden  machinery – Safety – Part 2-11: Particular requirements for hand-held reciprocating saws         C         03/03/2021         OJ L 72 –   03/03/2021 Restriction: This harmonised standard does not confer a presumption of conformity with the essential health and safety requirements set out in point 1.2.3. (second paragraph, first indent, applied with the first paragraph) and point 2.2.1. (first paragraph, third indent) of Annex I to Directive 2006/42/EC, which require sufficient protection against unintentional starting regardless of the cause.         30/04/2024       OJ L, 2024/1256 – 30/04/2024           –
  2006/42/EC   Cenelec   EN 62841-2-14:2015 Electric motor-operated hand-held tools, transportable tools and lawn and garden  machinery – Safety – Part 2-14: Particular requirements for hand-held planers   C   13/05/2016   OJ C 173 – 13/05/2016     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   Cenelec   EN 62841-2-17:2017 Electric motor-operated hand-held tools, transportable tools and lawn and garden  machinery – Safety – Part 2-17: Particular requirements for hand-held routers   C   19/03/2019   OJ L 75 –   19/03/2019     –       –       –
  2006/42/EC   Cenelec   EN 62841-2-21:2019 Electric motor-operated hand-held tools, transportable tools and lawn and garden  machinery – Safety – Part 2-21: Particular requirements for hand-held drain cleaners   C   02/04/2020   OJ L 102 –  02/04/2020     –       –       –
  2006/42/EC   Cenelec   EN 62841-3-1:2014, EN 62841-3-1:2014/AC:2015 Electric motor-operated hand-held tools, transportable tools and lawn and garden  machinery – Safety – Part 3-1: Particular  requirements for transportable table saws (IEC 62841-3-1:2014, modified)   C   15/01/2016   OJ C 14 –  15/01/2016     –       –   19/10/201 9   OJ L 75 –   19/03/2019
  2006/42/EC   Cenelec   EN 62841-3-1:2014, EN 62841-3-1:2014/AC:2015, EN 62841-3-1:2014/A11:2017 Electric motor-operated hand-held tools, transportable tools and lawn and garden  machinery – Safety – Part 3-1: Particular  requirements for transportable table saws (IEC 62841-3-1:2014, modified)   C   19/03/2019   OJ L 75 –   19/03/2019     –       –   02/02/202 5   OJ L 194 –  02/08/2023
  2006/42/EC   Cenelec EN 62841-3-1:2014, EN 62841-3-1:2014/AC:2015,  EN 62841-3-1:2014/A11:2017, EN 62841-3-1:2014/A1:2021,   EN 62841-3-1:2014/A12:2021 Electric motor-operated hand-held tools, transportable tools and lawn and garden  machinery – Safety – Part 3-1: Particular  requirements for transportable table saws (IEC 62841-3-1:2014, modified)   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
  2006/42/EC   Cenelec   EN 62841-3-4:2016, EN 62841-3-4:2016/A11:2017 Electric motor-operated hand-held tools, transportable tools and lawn and garden  machinery – Safety – Part 3-4: Particular  requirements for transportable bench grinders   C   19/03/2019   OJ L 75 –   19/03/2019     –       –   03/09/202 2   OJ L 72 –   03/03/2021
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   Cenelec EN 62841-3-4:2016, EN 62841-3-4:2016/A11:2017, EN 62841-3-4:2016/A12:2020, EN 62841-3-4:2016/A1:2020 Electric motor-operated hand-held tools, transportable tools and lawn and garden  machinery – Safety – Part 3-4: Particular  requirements for transportable bench grinders   C   03/03/2021   OJ L 72 –   03/03/2021     –       –       –
  2006/42/EC   Cenelec   EN IEC 62841-3-5:2022, EN IEC 62841-3- 5:2022/A11:2022 Electric motor-operated hand-held tools, transportable tools and lawn and garden  machinery – Safety – Part 3-5: Particular  requirements for transportable band saws   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
  2006/42/EC   Cenelec   EN 62841-3-6:2014, EN 62841-3-6:2014/AC:2015 Electric motor-operated hand-held tools, transportable tools and lawn and garden  machinery – Safety – Part 3-6: Particular  requirements for transportable diamond  drills with liquid system (IEC 62841-3-   6:2014, modified)   C   15/01/2016   OJ C 14 –  15/01/2016     –       –   19/10/201 9   OJ L 75 –   19/03/2019
  2006/42/EC   Cenelec   EN 62841-3-6:2014, EN 62841-3-6:2014/AC:2015, EN 62841-3-6:2014/A11:2017 Electric motor-operated hand-held tools, transportable tools and lawn and garden  machinery – Safety – Part 3-6: Particular  requirements for transportable diamond  drills with liquid system (IEC 62841-3-   6:2014, modified)   C   19/03/2019   OJ L 75 –   19/03/2019     –       –   02/02/202 5   OJ L 194 –  02/08/2023
  2006/42/EC   Cenelec EN 62841-3-6:2014, EN 62841-3-6:2014/AC:2015,  EN 62841-3-6:2014/A11:2017, EN 62841-3-6:2014/A1:2022,   EN 62841-3-6:2014/A12:2022 Electric motor-operated hand-held tools, transportable tools and lawn and garden  machinery – Safety – Part 3-6: Particular  requirements for transportable diamond  drills with liquid system (IEC 62841-3-   6:2014, modified)   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
  2006/42/EC   Cenelec   EN IEC 62841-3-7:2021, EN IEC 62841-3- 7:2021/A11:2021 Electric motor-operated hand-held tools, transportable tools and lawn and garden  machinery – Safety – Part 3-7: Particular  requirements for transportable wall saws   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   Cenelec   EN 62841-3-9:2015, EN 62841-3-9:2015/AC:2016- 09 Electric motor-operated hand-held tools, transportable tools and lawn and garden  machinery – Safety – Part 3-9: Particular  requirements for transportable mitre saws   C   13/05/2016   OJ C 173 – 13/05/2016     –       –   15/11/201 9   OJ L 75 –   19/03/2019
  2006/42/EC   Cenelec EN 62841-3-9:2015, EN 62841-3-9:2015/AC:2016- 09, EN 62841-3-9:2015/A11:2017 Electric motor-operated hand-held tools, transportable tools and lawn and garden  machinery – Safety – Part 3-9: Particular  requirements for transportable mitre saws   C   19/03/2019   OJ L 75 –   19/03/2019     –       –   03/09/202 2   OJ L 72 –   03/03/2021
  2006/42/EC   Cenelec   EN IEC 62841-3-9:2020, EN IEC 62841-3- 9:2020/A11:2020 Electric motor-operated hand-held tools, transportable tools and lawn and garden  machinery – Safety – Part 3-9: Particular  requirements for transportable mitre saws   C   03/03/2021   OJ L 72 –   03/03/2021     –       –       –
  2006/42/EC   Cenelec   EN 62841-3-10:2015, EN 62841-3- 10:2015/AC:2016-07 Electric motor-operated hand-held tools, transportable tools and lawn and garden  machinery – Safety – Part 3-10: Particular requirements for transportable cut-off machines   C   13/05/2016   OJ C 173 – 13/05/2016     –       –   19/10/201 9   OJ L 75 –   19/03/2019
  2006/42/EC   Cenelec EN 62841-3-10:2015, EN 62841-3- 10:2015/AC:2016-07, EN 62841-3- 10:2015/A11:2017 Electric motor-operated hand-held tools, transportable tools and lawn and garden  machinery – Safety – Part 3-10: Particular requirements for transportable cut-off machines   C   19/03/2019   OJ L 75 –   19/03/2019     –       –   02/02/202 5   OJ L 194 –  02/08/2023
    2006/42/EC     Cenelec EN 62841-3-10:2015, EN 62841-3- 10:2015/AC:2016-07, EN 62841-3- 10:2015/A11:2017, EN 62841-3-10:2015/A1:2022, EN 62841-3- 10:2015/A12:2022   Electric motor-operated hand-held tools, transportable tools and lawn and garden  machinery – Safety – Part 3-10: Particular requirements for transportable cut-off machines     C     02/08/2023     OJ L 194 –  02/08/2023     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   Cenelec   EN 62841-3-12:2019 Electric motor-operated hand-held tools, transportable tools and lawn and garden  machinery – Safety – Part 3-12: Particular requirements for transportable threading machines   C   02/04/2020   OJ L 102 –  02/04/2020     –       –       –
  2006/42/EC   Cenelec   EN 62841-3-13:2017 Electric motor-operated hand-held tools, transportable tools and lawn and garden  machinery – Safety – Part 3-13: Particular requirements for transportable drills   C   09/03/2018   OJ C 92 –  09/03/2018     –       –       –
  2006/42/EC   Cenelec   EN 62841-3-14:2017 Electric motor-operated hand-held tools, transportable tools and lawn and garden  machinery – Safety – Part 3-14: Particular requirements for transportable drain cleaners   C   19/03/2019   OJ L 75 –   19/03/2019     –       –       –
  2006/42/EC   Cenelec   EN 62841-4-1:2020 Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery – Safety – Part 4- 1: Particular requirements for chain saws   C   03/03/2021   OJ L 72 –   03/03/2021     –       –       –
  2006/42/EC   Cenelec   EN 62841-4-2:2019 Electric motor-operated hand-held tools, transportable tools and lawn and garden  machinery – Safety – Part 4-2: Particular  requirements for hedge trimmers   C   02/04/2020   OJ L 102 –  02/04/2020     –       –   02/02/202 5   OJ L 194 –  02/08/2023
  2006/42/EC   Cenelec   EN 62841-4-2:2019, EN 62841-4-2:2019/A11:2022, EN 62841-4-2:2019/A1:2022 Electric motor-operated hand-held tools, transportable tools and lawn and garden  machinery – Safety – Part 4-2: Particular  requirements for hedge trimmers   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
    Legislation reference (A)     ESO (B)     Reference number of the standard (C)     Title of the standard (D)     Type (E)   Date of start of presumption of conformity (1)   OJ reference for publication in OJ (2)     Restriction (3) Date of start of presumption of conformity with restriction (4)   OJ reference for publication of a restriction in OJ (5) Date of withdraw al from OJ (end of presumpt ion of conformit y) (6)   OJ reference for withdrawal from OJ (7)
  2006/42/EC   Cenelec   EN IEC 62841-4-3:2021, EN IEC 62841-4- 3:2021/A11:2021 Electric motor-operated hand-held tools, transportable tools and lawn and garden  machinery – Safety – Part 4-3: Particular  requirements for pedestrian controlled walk-behind lawnmowers   C   02/08/2023   OJ L 194 –  02/08/2023     –       –       –
  2006/42/EC   Cenelec   EN IEC 62841-4-5:2021, EN IEC 62841-4- 5:2021/A11:2021 Electric motor-operated hand-held tools, transportable tools and lawn and garden  machinery – Safety – Part 4-5: Particular  requirements for grass shears   C   02/08/2023   OJ L 194 –  02/08/2023     –       –   15/05/202 4   OJ L, 2024/1329 – 15/05/2024
  2006/42/EC   Cenelec EN IEC 62841-4-5:2021, EN IEC 62841-4- 5:2021/A11:2021, EN IEC 62841-4- 5:2021/AC:2024-01 Electric motor-operated hand-held tools, transportable tools and lawn and garden  machinery – Safety – Part 4-5: Particular  requirements for grass shears   C   15/05/2024   OJ L, 2024/1329 – 15/05/2024     –       –       –
  2006/42/EC   Cenelec   EN IEC 62841-4-7:2022, EN IEC 62841-4- 7:2022/A11:2022 Electric motor-operated hand-held tools, transportable tools and lawn and garden  machinery – Safety – Part 4-7: Particular  requirements for pedestrian controlled walk-behind lawn scarifiers and aerators   C   02/08/2023   OJ L 194 –  02/08/2023     –       –   15/05/202 4   OJ L, 2024/1329 – 15/05/2024
    2006/42/EC     Cenelec EN IEC 62841-4-7:2022, EN IEC 62841-4- 7:2022/A11:2022, EN IEC 62841-4- 7:2022/AC:2023-05, EN IEC 62841-4- 7:2022/AC:2023-10 Electric motor-operated hand-held tools, transportable tools and lawn and garden  machinery – Safety – Part 4-7: Particular  requirements for pedestrian controlled walk-behind lawn scarifiers and aerators   C     15/05/2024   OJ L, 2024/1329 – 15/05/2024     –       –       –

Column legend

Reference information on legislation and standards

(A) (B) (C) (D) (E)

Reference number of a relevant Directive or Regulation under which it was published in the OJ European standardisation organisation that adopted the relevant standard

Reference number of a relevant European standard or of a European standard and its amendment(s)

Title of a European standard A-type standards

A-type standards specify basic concepts, terminology and design principles applicable to all categories of machinery. Application of such standards alone, although providing an essential framework for the correct application of the Machinery Directive, is not sufficient to ensure conformity with the relevant essential health and safety requirements of the Directive and therefore does not give a

full presumption of conformity (OJ L 194, 2.8.2023).

B-type standards

B-type standards deal with specific aspects of machinery safety or specific types of safeguard that can be used across a wide range of categories of machinery. Application of the specifications of B- type standards confers a presumption of conformity with the essential health and safety requirements of the Machinery Directive that they cover when a C-type standard or the manufacturer’s risk

assessment shows that a technical solution specified by the B-type standard is adequate for the particular category or model of machinery concerned. Application of B-type standards that give

specifications for safety components that are independently placed on the market confers a presumption of conformity for the safety components concerned and for the essential health and safety requirements covered by the standards (OJ L 194, 2.8.2023).

C-type standards

C-type standards provide specifications for a given category of machinery. The different types of machinery belonging to the category covered by a C-type standard have a similar intended use and present similar hazards. C-type standards may refer to A or B-type standards, indicating which of the specifications of the A or B-type standard are applicable to the category of machinery

concerned. When, for a given aspect of machinery safety, a C-type standard deviates from the specifications of an A or B-type standard, the specifications of the C-type standard take precedence

over the specifications of the A or B-type standard. Application of the specifications of a C-type standard on the basis of the manufacturer’s risk assessment confers a presumption of conformity

with the essential health and safety requirements of the Machinery Directive covered by the standard. Certain C-type standards are organised as a series of several parts, Part 1 of the standard giving

general specifications applicable to a family of machinery and other parts of the standard giving specifications for specific categories of machinery belonging to the family, supplementing or modifying the general specifications of Part 1. For C-type standards organised in this way, the presumption of conformity with the essential health and safety requirements of the Machinery  Directive is conferred by application of the general Part 1 of the standard together with the relevant specific part of the standard (OJ L 194, 2.8.2023).

Dates and OJ references for establishing a presumption of conformity

(1)                   Date when a presumption of conformity starts or started in cases where a reference was published in the OJ without restriction. This date is usually, but not always, the same as the OJ reference date in column (2)

(2)                   Reference number and date of a relevant publication in the L or C series of the OJ in cases where a reference was published in the OJ without restriction

Dates and OJ references for establishing a presumption of conformity with restriction

(3)                   Restriction published in the OJ to restrict a presumption of conformity – this includes restrictions on the basis of formal objections

(4)                   Date when a presumption of conformity with restriction starts or started in cases where a reference was published in the OJ with restriction. This date is usually, but not always, the same as the date in column (5)

(5)                   Reference number and date of a relevant publication in the L or C series of the OJ in cases where a reference was published in the OJ with restriction

Dates and OJ references for ending a presumption of conformity

(6)                   Date when a presumption of conformity ends or ended

(7)                   Reference number and date of a relevant publication in the L or C series of the OJ where the date of withdrawal from the OJ (date in column (6)) was published

如您有相关疑问或具体需求，欢迎与我们取得联系：

服务热线：021-52992565, 13122261136
电子邮箱：info@certpi.com

————————————–

  1. 机械产品如何进行CE认证？
  2. 欧盟CE标志及其8种合格评定模式
  3. 遵循功能安全标准ISO 13849-1需要了解的13个词汇
  4. CE-MD机械指令(EU)/2023/1230取代2006/42/EC,将于2027年1月14日实行
标签：，，

推荐产品